Parting out the Mazda

[Chadnutz]

I don't have the time, money, shop I can leave it in or determination to solve it's problems and the divorced setup is **** so...

Make reasonable offers. I won't ship anything heavy. I might go to College Station sometime in the near future and if there is a lot of **** to deliver I'll deliver it but it has to be worth my while. The Beretta gets twice the mileage with much cheaper fuel, so I plan to drive it up there. I'll respond to offers only. If you want to say I told you so that's fine. If we need to bull ****, let's put that in the kitchen. :flipoff2:

************************************************** *****

84/85 Toy front axle with left side profield, chromo shafts, hy steer arms, DOM tie rod and drag link. 4.10s, welded by Cody

Two long side spare toy front shafts, one short side

Three birfields

Rear Toy axle. 4.10s, welded by Cody

One spare rear shaft that I can get the bearings off of.

Toy steering box tapped for hydro-assist.

Hydro assist steering including ram, aluminum reservoir, cooler, hoses.

2 Corbeau seats

two sets of racing harnesses

Mini truck tool box

One homemade bed that can probably be used on a mini truck with the toolbox.

Four black rock crawlers, 6 lug, 15x8 and four nearly bald Swamper TSL/SX

One black rock crawler, 6 lug, 15x10

Brand new 36x12.50R15 TSL/SX

Two CV toy driveshafts by Cody - Made with black pipe, pretty stout, can get measurements.

One stock toy front CV shaft

One OTT divorced toy case adapter for suzukis using Toy cases

One toy t-case, not in perfect shape but works, with brand new mount

One set of Rancho 44044 springs

One set of Rancho 44154 springs

All located in San Antonio.

[BroncoJo]

I'm interested in:
Hydro assist steering including ram, aluminum reservoir, cooler, hoses.

2 Corbeau seats

two sets of racing harnesses

send me a pm or make a post with price and info/condition. Can the hydro assit be set up for a fullsize d44 or is it little truck specific(I know very little of hydro assit)? If you really want me to make an offer- $10 and you deliver:gigem:.

[mudtoy67]

In, thanks for the chance!!-pimp-






















:flipoff2:sorry to hear that Nutz, you might be happier starting over from scratch anyway. :)

And if by chance you decide to part the front axle, I'm interested in the high steer arms and the steering knuckles. I'll make an offer if it comes to that.

[J Cooper]

i might be interested in the 44044s
by set do you mean 2 or 4?

whats the difference with the 44154s? isnt it like 2" vs 4"?

[agjohn02]

got a link to your build thread so we can see pics of these parts?

[TxCruzr]

when you get time, can you measure the bolt pattern for the driveshafts
i have a funky flange and i think i need the mini truck dshaft pattern to fit it

[davido]

why not sell it complete?

[DRAGOONRANCH]

why not sell it complete?

because it might actually get finished and be wheeled???


dimensions and pictures of the tool box?

[JB]

got a link to your build thread so we can see pics of these parts?

funny right there:D

[CRaSHnBuRN]

I'll give you $20 for the stock toy CV driveshaft if the CV is in decent shape, and you can get it to college station

[stx4wheeler]

would also be interested in pics of the seats and a price

[FJAggie07]

I am interested in a couple of the birfs, the minitruck toolbox, and the TSL's. Price and Pics please. I would even come down to San Antonio and get em from ya if you did me up right :D

[Chadnutz]

I will take pictures of everything tomorrow and try to give fair prices on all of this stuff vs. wear and tear and initial purchase price.

I'd rather not start parting out the front axle because that is more work for me and it is set up for someone doing the swap. If it comes down to that later on I'll think about it.

The 44154s are long but stiff. The spring is wider as well. Try looking them up at gorancho.com. If you pull a few leaves out then would probably be much better. I couldn't because the front sits higher than the rear already.

As far as finishing the truck, it isn't worth it. The divorced setup is probably impossible to make work without moving the rear case back and adding a driveshaft with slip in between or getting a 2wd transmission so a longer shaft with slip could be used. I probably should have tried that route to begin with. IF I ever try to wheel anything again, I'll probably buy an early bronco. I have a line on an F-350 that ain't going anywhere anytime soon and it's mine unless my girlfriend and I break up. Until then I'll be buying guns (new old hobby) and looking for some land.

[bcolman]

i am interested in the hydro reservoir, and cooler

[RCcola55]

Is the steering box for the IFS trucks

[colman]

i'm interested in the hydro assist setup as well as the tool box

[Eckert]

price on the complete high steer? box to arms.

[Chadnutz]

Is the steering box for the IFS trucks

Yes.

[JeepPhisherman]

Damnit!

I'm interested in the assist set-up, the rear shaft, some spare birfs, and a top-shift t-case shifter if you're interested in seperating or have a spare.

[Shaggy]

this is a sad day

[bcolman]

i tried to respond to your pm but your box is full

[RCcola55]

dibs on the box

[Chadnutz]

Pictures inbound. Prices to follow.

[Chadnutz]

More...

[Chadnutz]

And more....

[DRAGOONRANCH]

Pictures inbound. Prices to follow.


More...


And more....

I hate the FAWKIN new Boards!!!!:angry::angry::angry::angry:

[Chadnutz]

84/85 Toy front axle with left side profield, chromo shafts, hy-steer arms, DOM tie rod and drag link. 4.10s, welded by Cody

Complete - $400
Hy Steer Arms - $100 (Won't part out unless axle doesn't sell.

Two long side spare toy front shafts, one short side

Longs - $30 each. Short - $25

Three birfields - $30 each or $80 for three

Rear Toy axle. 4.10s, welded by Cody - $150

One spare rear shaft that I can't get the bearings off of. - $40

Toy steering box tapped for hydro-assist. $150

Hydro assist steering including ram, aluminum reservoir, cooler, hoses. $200

2 Corbeau seats with sliders that can be modified for your truck - $250 (Paid $720 with sliders)

two sets of racing harnesses - $80

Mini truck tool box - $100

One homemade bed that can probably be used on a mini truck with the toolbox. - $50

Four black rock crawlers, 6 lug, 15x8 and four nearly bald Swamper TSL/SX

Four aluminum progressive wheels 6 lug, 15x8 - $50

Wheels - $150
Wheels at tires - $225

One black rock crawler, 6 lug, 15x10 - $40

Brand new 36x12.50R15 TSL/SX - $200

Two CV toy driveshafts by Cody - Made with black pipe, pretty stout, can get measurements. Front has long travel splines that can be recovered using a lathe - $50

One stock toy front CV shaft - $40

One OTT divorced toy case adapter for suzukis using Toy cases - $50

One toy t-case, not in perfect shape but works, with brand new mount - $40

One set of Rancho 44044 springs - $100

One set of Rancho 44154 springs - $100

Used Optima Battery for use in a duel battery setup or something - $25

That adds up to $2540

All located in San Antonio.
Everything together for $1800 trumps all other deals is offer is received by 5 PM tomorrow.
Will take first request in my PM box for each item. Don't want to start bidding wars.

Enjoy!

[agjohn02]

brandon, $1800!

[CRaSHnBuRN]

brandon, $1800!

no ****. Grab it, swap in a 2wd tranny and jack shaft, and you're wheeling.

[BroncoJo]

sending pm about seats and harnesses.

no longer interested in hydro assist.

[Eckert]

sending pm about seats and harnesses.

no longer interested in hydro assist.

what are you talking about? you have the most comfortable seats ever made!

[william_ace]

what are you talking about? you have the most comfortable seats ever made!

what are YOU talking about. theres just 1 peice of crap seat in that thing :gigem:

[Eckert]

what are YOU talking about. theres just 1 peice of crap seat in that thing :gigem:

inside joke from the great motor pull of 08.

[william_ace]

haha gotcha, i figured you were talkin about the bench seat in his f250 thingy... nevermind

[BroncoJo]

first off the f-thingy seat has alot of life left in it, but a little too bouncy and tries to propel you out of the cab.

Second, the f-thingy will deffinitly be rocking the sweet camaro seats just to add some variety.:gigem:

[Seth]

all those links to pics, and the ones anyone wants to see are in the last group. sweet. after the first five, im glad we established it has tires, a frame, a battery, and springs. maybe some steering too.

[Eckert]

first off the f-thingy seat has alot of life left in it, but a little too bouncy and tries to propel you out of the cab.

Second, the f-thingy will deffinitly be rocking the sweet camaro seats just to add some variety.:gigem:

nice. please make OBA out of the tank. the guy still wants it back ;)

[JeepPhisherman]

nice. please make OBA out of the tank. the guy still wants it back ;)

That guy is a douche.



Nutz, I saw I missed your call last night, I was in the garage until late. I'll give you a shout this afternoon.

[uglyota]

Hey chris if you end up with that profield, let me know when it breaks, I've still got those bellfields available ;)

[Chadnutz]

Still for sale:

84/85 Toy front axle with left side profield, chromo shafts, hy steer arms, DOM tie rod and drag link. 4.10s, welded by Cody

One long side front stock shaft

One birfield

Rear Toy axle. 4.10s, welded by Cody

One spare rear shaft that I can get the bearings off of.

Toy steering box tapped for hydro-assist.

Hydro assist steering including ram, aluminum reservoir, cooler, hoses.

Howe Engineering high volume pump and pulley

Four slightly used black rock crawlers, 6 lug, 15x8 and four nearly bald Swamper TSL/SX

One new black rock crawler, 6 lug, 15x10

One brand new 36x12.50R15 TSL/SX

Two CV toy driveshafts by Cody - Made with black pipe, pretty stout, can get measurements.

One toy t-case, not in perfect shape but works, with brand new mount

One set of Rancho 44044 springs

One set of Rancho 44154 springs

For prices, see this site: http://sanantonio.craigslist.org/pts/619754661.html

[JeepPhisherman]

Hydro assist gone now?

[Chadnutz]

It says still for sale... :confused::flipoff2:

[BMFScout]

your craigslist link is expired.

[Chadnutz]

I noticed that today. I will renew it when I get home. Thanks.

[JeepPhisherman]

Thought it said sold?

[Chadnutz]

Thought it said sold?

It says "Still for Sale."

[agjohn02]

the CL ad said "sold"

[colman]

i'm interested in steering of yo still have it

[Eckert]

axle?

[Chadnutz]

Updated Craigslist. Feel free to contract me through that or this site.

http://sanantonio.craigslist.org/pts/679733153.html

[Chadnutz]

What's Left:

Brand new Super Swamper TSL/SX 36x12.50R15
Brand new Black Rock Crawler 15x10 6 lug
Used stock Toyota front drive shaft
Birfield (2)
Long side front axle
Short side front axle shaft (2)
Rear axle shaft