AggieTJ2007
10-01-2008, 01:29 PM
I don't have a clue on the prices so PM me and we can work something out.
All parts out of a 200 TJ with about 80,000 miles
TJ rear axle
Dana 44
4.56 Genuine Gear set professionally installed
Full Detriot
Alloy USA chromo shafts
Tera Disk Brakes
upgraded to 1310 u-bolt style pinion yoke
some sort of heavy ass diffcover Rockcrusher or something like that
Has fresh wheel bearings
TJ Front Axle
Dana 30
4.56 Genuine Gear set professionally installed
Aussie locker
Hydro Assist (ram included 1.75x8 )
HD One-ton steering (1.5x.385 wall tubing)
I have 2 extra unit bearing and a few extra shafts that could go with it.
I an entire spare housing, however it is bent so only good for bearing/brakes
one Chromo stub shaft.
I went through the axle in March and all of the bearing and gears looked in good shape
Rubicon Express suspension
3.5" superflex lift
all control arms have flex joints on one end and bushing on the other
all control arms upper and lower are ajustable so that proper steering angles are maintained
Adjustable trackbars front and rear, HD rear track bar
Bad: it needs new bushings on all of the control arms. Rubicon express sell them for $13 each
Yellow half doors with black soft uppers. Door are in great shape rarely used. $500
M.O.R.E Bolt in sport cage. Bolts to the floor through the drain plugs and the factory B pillar. You don't have to cut the dash and it adds alot of extra protection. $125
PM if you have any questions or want pictures.
All parts out of a 200 TJ with about 80,000 miles
TJ rear axle
Dana 44
4.56 Genuine Gear set professionally installed
Full Detriot
Alloy USA chromo shafts
Tera Disk Brakes
upgraded to 1310 u-bolt style pinion yoke
some sort of heavy ass diffcover Rockcrusher or something like that
Has fresh wheel bearings
TJ Front Axle
Dana 30
4.56 Genuine Gear set professionally installed
Aussie locker
Hydro Assist (ram included 1.75x8 )
HD One-ton steering (1.5x.385 wall tubing)
I have 2 extra unit bearing and a few extra shafts that could go with it.
I an entire spare housing, however it is bent so only good for bearing/brakes
one Chromo stub shaft.
I went through the axle in March and all of the bearing and gears looked in good shape
Rubicon Express suspension
3.5" superflex lift
all control arms have flex joints on one end and bushing on the other
all control arms upper and lower are ajustable so that proper steering angles are maintained
Adjustable trackbars front and rear, HD rear track bar
Bad: it needs new bushings on all of the control arms. Rubicon express sell them for $13 each
Yellow half doors with black soft uppers. Door are in great shape rarely used. $500
M.O.R.E Bolt in sport cage. Bolts to the floor through the drain plugs and the factory B pillar. You don't have to cut the dash and it adds alot of extra protection. $125
PM if you have any questions or want pictures.