PDA

View Full Version : Narrow track dana 44 f/r, tires, etc



stx4wheeler
01-30-2009, 11:24 AM
Alright i have the axles out of my 76 wagoneer

They are the narrow track ones that i believe are pretty much bolt in for a cj.
front is passengerside drop and the rear is an offset dana 44. The gears in both are stock and prolly are 3.54 or whatever the stock ratio is, both are open.

front, $200 without the drive slugs

rear-$25 has new wheel cylinders,shoes,hardware, and the drums were turned about 2 years ago, -post up quick because this will most likely go to the scrap yard tomorrow if no one calls me(call me at 9 7 9 5 7 4 5870 if you want this)

I will do $200 for both axles minus the rear pinion yoke

front wagoneer leaf springs 2.5 wide with 2" spring pin offset not sure on the length i think they are 5 leafs in the pack, spring plates and u-bolts will be included-$50

Rear wagoneer leafs 2,5 wide- 56" long with 4 inch spring pin offset i think it is a five leaf pack but i can check when i get home, will come with spring plates- $50

Will do $90 for both pairs of leafs.
Or $275 for all the springs and axles

4-315/70/17 bfg 40 percent tread $90

Try and keep up this next stuff is long

5- 6 lug rims will fit chevy,jeep, toyota 4 are 15x7 or 15x8 i dont know. Of the 4, 3 are gold and chrome with some rust, one is a chrome wagon wheel. 5th is the stock spare from a wagoneer i have no idea on width, and comes with the stock tire. The 15x7's have 31x10.5x15 tires on them, 1 bfg long trail has a slow leak, and another mud tire goes flat within a day, it may have mud or something in the bead from going flat and sitting flat for extended periods of time. 3 of the 4 tires are mud terrains with prolly half tread and the other is a bfg long trail radial with the same amount of tread. I also have another 31 mud tire with half tread to go on there would be good for a hunting jeep or play toy, some tires prolly have green slime in them already. $40 bucks for the five rims and 6 tires

85cj7
01-30-2009, 11:44 AM
whats the width on the front? 58" maybe?

stx4wheeler
01-30-2009, 11:58 AM
u talking wms to wms or inner c to inner c? i have no idea it is still in the jeep.

eight
01-30-2009, 12:22 PM
They're no more bolt in than a set of 1 ton axles.

texasxj
01-30-2009, 12:32 PM
I may want the rears

stx4wheeler
01-30-2009, 12:40 PM
They're no more bolt in than a set of 1 ton axles.


i think the spring perches are the same width, and they arent as wide as full widths

eight
01-30-2009, 12:53 PM
no

colman
01-30-2009, 01:25 PM
the front axle is 60.5" wide and no it will not bolt in. the perches are 4" wider than stock cj which i thought was full width. ryan it is the same axle you had that you got your outers from

85cj7
01-30-2009, 01:30 PM
Oh ok thanks colman. I would be interested if it was less considering I won't be getting to that part of the project for a while. I'll just wait. Kevin keep me updated if anyone else bites though. thanks

Eckert
01-30-2009, 01:44 PM
Oh ok thanks colman. I would be interested if it was less considering I won't be getting to that part of the project for a while. I'll just wait. Kevin keep me updated if anyone else bites though. thanks

what are you doing now?!

stx4wheeler
01-30-2009, 02:11 PM
alright it doesnt bolt in, thanks for the added info everyone now buy this axle

CheapJeep
01-30-2009, 02:20 PM
What kind of condition are the waggy front springs in? I may be interested if they aren't too rusted and worn.

stx4wheeler
01-30-2009, 02:25 PM
they are stock springs from a 1976 wagoneer, and they have normal leaf spring surface rust. condition is they arent bent or have any messed up leaves

breckboarder55
01-30-2009, 03:25 PM
Is this anything like what I should be looking for with my TJ? (the front)

colman
01-30-2009, 03:28 PM
nope you want an axle from a 80-91 non disconect wagoneer

stx4wheeler
01-30-2009, 11:05 PM
ill do 175 for the front i dont wanna list this thing on craigslist or else where

85cj7
01-31-2009, 12:55 PM
have any interest in selling the shafts?

stx4wheeler
02-02-2009, 01:24 PM
no on selling just the shafts but i will do 150 for the whole front.

colman
02-02-2009, 04:00 PM
need anything in trade for the axle

KrazyKarl02
02-02-2009, 04:17 PM
Good god, you two idiots call each other and stop posting your haggling.

stx4wheeler
02-02-2009, 05:06 PM
nah i dont need anything in trade, going on craigslist and other sites tonight or tomorrow

call me -just for karl

robbie you want the springs? ill do 40 for them

colman
02-02-2009, 07:25 PM
i don't have an immediat use for it and am trying to stop stockpiling parts, i have to many so i guess i will have to pass

ol burj
02-02-2009, 10:41 PM
what do you think bout the front fitting under a 94 isuzu trooper?

DRAGOONRANCH
02-02-2009, 11:19 PM
i don't have an immediat use for it and am trying to stop stockpiling parts, i have to many so i guess i will have to pass

SOMEBODY GET THE MAN A DOCTOR!!!!

stx4wheeler
02-02-2009, 11:23 PM
ol burj as long as the izusu is a passengerside drop differential it can be made to work with some fabricating, i dont know if this is an extremely hard swap or not.

stx4wheeler
02-09-2009, 01:55 PM
alright this was a good weekend for selling crap, i got rid of the 38 pj's, dana 44 front, some spare hubs, and 6 tires and 5 wheels that came of the jeep. Now if i can sell those damn 315's i will be golden