PDA

View Full Version : Buy my stuff, there's lots of it



85cj7
05-05-2009, 07:41 PM
--------------------------------------------------------------------------------

1) AMC 20 axle.
The Good: 3.73 gears, arb locker, sprung over ant-wrap perches, ruffstuff anti-wrap bar mounts, rugged ridge heavy duty diff cover
The bad: The passanger side tube is bent upwards about an inch. I have not driver it sinse this happened a week ago, so there should be very little damage. Straighten the tubes and truss it and it's stronger than a d-44. Complete-$650
ARB-$500
Gears-$75
Cover-$50
Braided Stainless Airline 12'-$50

2)-Np-435 mainshaft from 2wd ford truck-$10

3)-Dana 300-T-176 Shifter Boot, great condition, like new-$10

4)Waggy 44 empty housing, no brackets, no cover, no gears, no shafts. Shortened to cj7 width so you don't have to outboard your springs, bolt on once you get some spring pads
Housing:$65

5)-Dana 30 stock cover-no damage or dents-$10

Pickup is in College Station, or I can bring to North Dallas in a week

Reckless
05-05-2009, 08:23 PM
If all goes to plan, I can bring it to DFW this weekend if need be.

stx4wheeler
05-07-2009, 09:31 AM
ill take the 435-205 adapter throw it in the pile with those springs you have for me.

mudtoy67
05-07-2009, 10:06 AM
I'm thinking about your housing...I need to see how bad I eff this one up first.:D

I may also pick up your third for a spare.

85cj7
05-07-2009, 10:17 AM
Please do I need to get rid of this stuff. I think I have the shafts and brakes sold. I'll sell you the housing and case/gears for $60?

tommy53002
05-07-2009, 11:15 AM
Ill take the rear leafs

85cj7
05-07-2009, 11:37 AM
you'll have to fight kevin for them. Kevin do you want the springs or are you passing them to the new guy?

85cj7
05-07-2009, 04:25 PM
updated, sorry tommy the springs were already sold

Doug Krebs
05-07-2009, 04:34 PM
I'll give you A beer for that np435 shaft.:flipoff2:

85cj7
05-07-2009, 04:46 PM
I'll take $9.99 for it

85cj7
05-07-2009, 06:11 PM
updated

DRAGOONRANCH
05-07-2009, 10:04 PM
How much fo jus one spline????

85cj7
06-14-2009, 01:08 PM
Also putting out a feeler on the jeep tires/wheels
Wheels: 15X10 Steel American Racing AR767 5x5.5
Tires: 35x12.5x15 Procomp X-terrains
Can't get a measurement on the tires yet, but around 50%. (will get a real measurement when the time comes)

$500 for wheels/tires

colman
06-14-2009, 01:12 PM
i have the housing, remember

85cj7
06-14-2009, 01:30 PM
I remember but I didn't know if you had picked it up, expecially with you getting rid of your other stuff. Thats cool, I remember.

Eckert
06-14-2009, 01:50 PM
Tires: 35x12.5x15 Procomp X-terrains
Can't get a measurement on the tires yet, but around 50%. (will get a real measurement when the time comes)

$500 for wheels/tires

how much for just the tires?

85cj7
06-14-2009, 02:05 PM
how much for just the tires?

$450

TMatheaus
06-14-2009, 04:03 PM
and 50 for just the wheels, if so i will take them

85cj7
06-14-2009, 04:41 PM
and 50 for just the wheels, if so i will take them

maybe, I'll have to see as I get closer. But like I said this was just a feeler. They won't be off the jeep until aug. I'll keep you in mind as the date approaches.

TMatheaus
06-15-2009, 07:21 AM
thats cool, just let me know about the wheels, i wont need them for a bit anyways

85cj7
07-26-2009, 11:53 AM
(2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$40

(5) 35x12.5x15 Procomp X-terrains. 50% tread, spare has a hole in the sidewall (has boot, does hold air) will get actual measurments-$400

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$10 each

Pickup is in College Station TX, or I can bring to North Dallas in a week. shipping on small items

colman
07-26-2009, 02:53 PM
i'm interested in the wheels, but where are the rest of them. i need at least 3. i may still take them

85cj7
07-26-2009, 04:39 PM
My two front wheels are the remaining two 5x5.5 and the rear two are 8x6.5. I thought about converting the front to 8 lug to run the same pattern but i think i'm at the point of saying f"ck it and just running two different patterns.

85cj7
07-27-2009, 02:17 PM
Measurements are from center of the tires, more tread as you go to the outside
1st pic-driver front 9/32" 45%
2nd pic-driver rear 11/32" 60%
3rd pic- spare with gash in sidewall (has boot, does hold air) 15/32" 85%
4th pic- passenger rear 9/32" 45%
5th pic-passenger front 7/32" 40%

85cj7
07-27-2009, 03:57 PM
pics
1st pic- (2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$50

85cj7
07-27-2009, 03:59 PM
last pics
1st/2nd pic- YJ Brake Master Cylinder
3rd pic-(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$10 each

texasxj
07-28-2009, 11:56 AM
About the cover- is the dent in the middle a dent or just there. Otherwise, I may take it off your hands.

colman
07-28-2009, 12:40 PM
what are you running for a mc now?

85cj7
07-28-2009, 12:46 PM
About the cover- is the dent in the middle a dent or just there. Otherwise, I may take it off your hands.

clayton, there are no dents, the cover just has a flat face.

85cj7
07-28-2009, 12:47 PM
what are you running for a mc now?

currently, none. But it will be 68 corvette master (non-power) with yj booster.

colman
07-28-2009, 09:16 PM
time for a colman low offer, 30 for the rims?

85cj7
07-29-2009, 08:11 AM
time for a colman low offer, 30 for the rims?

I won't be in town for another week, if thay haven't sold by then i'll sell them for $40.

85cj7
08-01-2009, 08:28 AM
Updated

85cj7
08-05-2009, 11:19 PM
I won't be in town for another week, if thay haven't sold by then i'll sell them for $40.

colman want them? $40 firm

colman
08-06-2009, 08:27 PM
naw i'll pass, don't need them just want them

85cj7
08-07-2009, 08:23 AM
(2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$40

(5) 35x12.5x15 Procomp X-terrains. 50% tread, spare has a hole in the sidewall (has boot, does hold air) will get actual measurments-$400

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$10 each

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj. -$20

Seth
08-07-2009, 01:07 PM
It's a tube, not a boot.

85cj7
08-07-2009, 02:41 PM
Someone is confrontational today!

No, it's a boot. I've seen it dismounted. It looks like a 4x4" patch however it is semi-inflated and is adhered to the sidewall. Bikers use boots all the time to fix trail flat, I haven't seen them to much in the offroading world though.

Seth
08-07-2009, 05:47 PM
interesting. no confrontation. just observational.

85cj7
08-25-2009, 06:37 PM
all right, everything is $10 each. come and get it

13" "zenon" television. works just fine

16" electric fan, brand unknown, works fine-sold to frick

one of those self coiling air hoses, yellow, i think its 40'

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air Make good rollers or cheap work tires/spares

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj

(2) cj stock proportioning valves

cj7 drivers side side view mirror, faded

braided stainless brake line, 24" long with banjo fitting at one end and standard 3/16" female on the other

will post up more as i come across it

stx4wheeler
08-26-2009, 09:41 AM
ill take the fan, i will be in c.s this weekend and can pick it up. This is an electric fan for a truck not your house right?

85cj7
08-26-2009, 06:12 PM
ill take the fan, i will be in c.s this weekend and can pick it up. This is an electric fan for a truck not your house right?

right, just give me a call anytime. 214-eight eight six-2559

85cj7
08-27-2009, 02:13 PM
all right, everything is $10 each. come and get it

13" "zenon" television. works just fine

16" electric fan, brand unknown, works fine-sold to frick

one of those self coiling air hoses, yellow, i think its 40'

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air Make good rollers or cheap work tires/spares

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj

(2) cj stock proportioning valves

cj7 drivers side side view mirror, faded

braided stainless brake line, 24" long with banjo fitting at one end and standard 3/16" female on the other

will post up more as i come across it

J Cooper
08-27-2009, 02:17 PM
this is the wrong thread but i run a 95 yj booster and master cylinder.... seems to stop my 42s


4 wheel disks. no proportioning valves

85cj7
08-27-2009, 02:22 PM
coop, i think you are right for the most part. I think the proportioning valve was the main problem. we'll see how it all turns out.

85cj7
09-02-2009, 05:46 PM
the 35s are up again. $375 OBO

cj nut
09-07-2009, 10:57 AM
Do you still have the brake lines?

85cj7
09-07-2009, 02:12 PM
It's only one side and yes I do.

cj nut
09-08-2009, 08:16 AM
O ok nevermind was looking for both that is though