colman
06-14-2009, 01:05 AM
some prices updated along with list
AXLES
chevy dana 60. pass drop. needs everything on the drivers side including the inner c (it is bent) but i do have the inner shaft and a spare inner for the short side. pass side is missing lockout and hole where tie rod goes is messed up. would be great for an off roader that is planning on doing high steer. i was going to narrow 4" and put into a cj and then convert to 5x5.5 but plans change. 4.10 gears and open diff. i do have spring plates. complete these go for over $1000. i just want it gone. $pending
custom d44 narrowed to cj perch width, wms is 65 and 8 lug. new brakes. no flattops. comes with c&c 14 bolt 63" wms, unwelded antiwrap perches, antiwrap bar mount, disc brake conversion, extended brake lines, spring plates, u-bolts and other misc things in a box, both 4.10 $800 (will not separate)
supercharger
chevy tbi supercharger kit, made by whipple, should be complete minus fuel pump and e-prom but i have contact info for chip. large kit fits small and big blocks $1000
doubler
chevy 203 to dana 300 w/ t-cases, no shifters. AA $800
turbo 350 4x4 $300 Packege with doubler for $1000
tires
36" hummer tires on stock chevy steelies 8 lug. 5, good tread on 4. $250
3 35x1250x17 thornbirds 80% or more tread, i needs patch $150
jeep parts
cj hardtop blue needs pass side window $300
cj steel full doors green, upper window frame cut but i have pieces to weld back. $ 100
cj firewall, 2 body mounts orange, great for buggy $50
cj grill white, turn signal holes enlarged $50
cj black bestop seat $65
amc hei distributer, unknown brand, maybe 500 miles on it, no cap rotor or coil $35
cj stock rear fender flares $5
tj rear flare don't know which side new in packaging $5
cj 1983 body, fenders, grill and hood. rust along rockers but could fix or i was going to boatside, rear cargo area is rusted out, comp cut. harness cut up $200
cj frame with waggy springs front, xj rear and btf stretch kit welded on back. chevy v8 motor mounts and tranny mount $350
random
2 sets of 350 heads one clean the other not $20 per pair
1 set vortec 350 heads, 136k on them, probably need to be gone thru, missing rockers but otherwise complete $100
1 vortec 350 block that may need sleeve, threw rod. no tins $20
350 oil pan, timing cover and valve covers stock $20
3" body lift for 98 chevy truck may need to replace a bolt or 2, used $50
88-98 chevy grill gurard, ranch hand brand $50
items will be edited as sold and updated as i find more
AXLES
chevy dana 60. pass drop. needs everything on the drivers side including the inner c (it is bent) but i do have the inner shaft and a spare inner for the short side. pass side is missing lockout and hole where tie rod goes is messed up. would be great for an off roader that is planning on doing high steer. i was going to narrow 4" and put into a cj and then convert to 5x5.5 but plans change. 4.10 gears and open diff. i do have spring plates. complete these go for over $1000. i just want it gone. $pending
custom d44 narrowed to cj perch width, wms is 65 and 8 lug. new brakes. no flattops. comes with c&c 14 bolt 63" wms, unwelded antiwrap perches, antiwrap bar mount, disc brake conversion, extended brake lines, spring plates, u-bolts and other misc things in a box, both 4.10 $800 (will not separate)
supercharger
chevy tbi supercharger kit, made by whipple, should be complete minus fuel pump and e-prom but i have contact info for chip. large kit fits small and big blocks $1000
doubler
chevy 203 to dana 300 w/ t-cases, no shifters. AA $800
turbo 350 4x4 $300 Packege with doubler for $1000
tires
36" hummer tires on stock chevy steelies 8 lug. 5, good tread on 4. $250
3 35x1250x17 thornbirds 80% or more tread, i needs patch $150
jeep parts
cj hardtop blue needs pass side window $300
cj steel full doors green, upper window frame cut but i have pieces to weld back. $ 100
cj firewall, 2 body mounts orange, great for buggy $50
cj grill white, turn signal holes enlarged $50
cj black bestop seat $65
amc hei distributer, unknown brand, maybe 500 miles on it, no cap rotor or coil $35
cj stock rear fender flares $5
tj rear flare don't know which side new in packaging $5
cj 1983 body, fenders, grill and hood. rust along rockers but could fix or i was going to boatside, rear cargo area is rusted out, comp cut. harness cut up $200
cj frame with waggy springs front, xj rear and btf stretch kit welded on back. chevy v8 motor mounts and tranny mount $350
random
2 sets of 350 heads one clean the other not $20 per pair
1 set vortec 350 heads, 136k on them, probably need to be gone thru, missing rockers but otherwise complete $100
1 vortec 350 block that may need sleeve, threw rod. no tins $20
350 oil pan, timing cover and valve covers stock $20
3" body lift for 98 chevy truck may need to replace a bolt or 2, used $50
88-98 chevy grill gurard, ranch hand brand $50
items will be edited as sold and updated as i find more