View Full Version : Dana 44 HP Narrowed
ol burj
04-15-2010, 01:58 AM
Dana 44 HP narrowed, was told it had 4.56 gears in it, havent bothered to look though. Lock outs work fine, would probably fit into an xj or something with a little fab.
$250 obo
mudtoy67
04-15-2010, 07:43 AM
What's the WMS? Is it bare or does it have the radius arm wedges?
stx4wheeler
04-15-2010, 07:47 AM
It is most likely an early bronco Dana 44 not a narrowed one.
ol burj
04-15-2010, 09:06 AM
it has the radius arm wedges and they are cast not separate pieces and the wms is about 60" or less
Eckert
04-15-2010, 10:09 AM
yeah, its got to be an EB axle. dont know how you would go about narrowing a cast 'c' d44.
out of curiosity, drum or disc?
mudtoy67
04-15-2010, 10:15 AM
EB 44 would be welded wedges wouldn't it?
BroncoJo
04-15-2010, 11:13 AM
EB 44 would be welded wedges wouldn't it?
believe so
robertf03
04-15-2010, 11:27 AM
eb wouldn't be high pinion.
ol burj
04-15-2010, 12:10 PM
disc brakes
Eckert
04-15-2010, 12:31 PM
pics...
colman
04-15-2010, 01:20 PM
if you check and verrify the gears that would help it sell
stx4wheeler
04-15-2010, 01:22 PM
It s the axle that was on tx4x4 for the past couple of weeks. There were some pics there.
ol burj
04-15-2010, 02:21 PM
this weld is partly what makes me think its been shortened. its on the passenger side wedge/inner tube.
And this shows how to shorten this type of axle
http://www.therangerstation.com/tech_library/narrowing_a_ford_dana44.htm
breckboarder55
06-13-2010, 03:27 PM
WMS? Passenger side drop? ETC?
colman
06-13-2010, 03:36 PM
i bought it. i just wanted the brakes from it for a cj thing i'm doing on a blue 7. so if you are interested in the rest let me know. i would take the hubs rotors and brackets. so u would get spindles in. 4.56 gears . i will measure it later
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.