Random Assortment

[85cj7]

RAT 3 speed early bronco transmission, I have cleaned it up and that is it, condition unknown-$30

Stock F-250 pitman arm, about a 1" drop-$10

Parts Mike special short pitman arm for chevy with 1 ton tre-$35

[85cj7]

Universal Horn-$5

Ford 5.4L v-8 throttle body, I think it will also fit the 4.7L v-8 with throttle position sensor and bolts, no cruise control-$20

Chevy d-44 knuckles non-flattops-$20

AMC-20 outer seal, new in package from crown, will work with stock two-piece or aftermarket one-piece shafts-$10

[85cj7]

Custom bed box that I built for my CJ7, can get measurements if need be but just look at the pictures for approximate size. made from 3/4"x3/4" angle and skinned with 16 gauge, two keys included, 100% water proof, could use some new paint. -$50

[85cj7]

edited

[bcolman]

ill give you $10 for the tool box

[85cj7]

and i'll give you a :flipoff2:

[bcolman]

$15?

[cj nut]

does the gps take the map cards? if so what card does it have? ill prob take it are you in cs

[tommy53002]

I'll give you $15 for the cj parking brake.

[cj nut]

ok i just looked up the gps, its the one i was thinking of ill take it will you be around one day this week ill stop buy and grab it from ya....

[davido]

I'll take the Plastic Car Ramps-$10

Come by Monday? Who has Clayton LS Ts these days?

[85cj7]

I'll give you $15 for the cj parking brake.

I'll give it to you for $20 if I don't have to ship.

[85cj7]

ok i just looked up the gps, its the one i was thinking of ill take it will you be around one day this week ill stop buy and grab it from ya....

I'll let you know. I'll text you if the guy in Dallas falls through.

[85cj7]

I'll take the Plastic Car Ramps-$10

Come by Monday? Who has Clayton LS Ts these days?

Ya, Monday should be cool. You have my number right? Tommy has the shirts, tdmayfield.

[Hot Pocket]

If Davido backs out, I could really use the ramps... Jacking the Jetta is a real PITA when it comes time to do oil changes...

[BroncoJo]

If Davido backs out, I could really use the ramps... Jacking the Jetta is a real PITA when it comes time to do oil changes...

If he does buy them, I got some I'll sell at the same price

[85cj7]

New Stuff


Rear TJ flares, have been cut on the inner lip to open up the wheel well more but the outer flare portion is intact-$20

[85cj7]

I'll give you $15 for the cj parking brake.

$20? interested?

[85cj7]

I'll take the Plastic Car Ramps-$10

Come by Monday? Who has Clayton LS Ts these days?

What happened Dave? Give me a call when you want to stop by.

[stx4wheeler]

What are the dimensions of the tool box?

[jerryg79]

What happened Dave? Give me a call when you want to stop by.

way to stand a guy up! DICK!:flipoff2:

[85cj7]

13.5Wx17.5Tx35.75L

[colman]

time for a colman cheapy. ten for the corners.....

[85cj7]

time for a colman cheapy. ten for the corners.....

got a couple buyers up in Dallas, going to take them up there next week.

[colman]

good as usual i didnt need them but kinda wanted them

[85cj7]

All the stuff posted up is still for sale. I went through some more stuff and have some more items.
-CJ, drivers side mirror, glass and seal is good with mount-$10
-I think the are d-44 ring gear bolts. 17 of them-$free
-Ford 5.4 L 'premium valve stem seals' for injectors, new in package-$10
-Dana 300 stock front output shaft, a common part to break on dana 300s, good to have a spare, good condition-$20
-2 ARB bulkhead line kit, brass compression fittings for arb lines that mount through the axle housing-$10
-A set of 4 cj rubber hood bumpers. Brand new in package. -$10
-About a dozen metal and plastic emblems, dodge, chevy, ford and some others. $10 for all

[TdmayfieldIV]

I'll take the tool box. Call me and we can work out a time for pickup

[85cj7]

Cool, send me your number in a pm and I will call you the next time I am down in CS. It might be this next weekend to move some more stuff.

[85cj7]

Box and dana 300 output shaft are sold