PDA

View Full Version : Wanted: dana 60 Yoke



savvyaggie
06-30-2010, 07:28 PM
Just like is says, I need a dana 60 yoke (or two if you have them).

Also, what trucks came with 1350 u-joints? everytime I ask for them at a parts store, they have no idea what they are. they just want to know what it fits.

colman
06-30-2010, 10:25 PM
1 ton chevy.... for decades till at least 2000

mudtoy67
06-30-2010, 10:57 PM
Also, what trucks came with 1350 u-joints? everytime I ask for them at a parts store, they have no idea what they are. they just want to know what it fits.

I've had the same problem. Look up the spicer p/n, then cross reference that to their p/n. You may have to xref it yourself on google cause sometimes they can't even do that.

http://www2.dana.com/Expert/wc.dll?hvtss~dedsec~2~13~06~

bcolman
06-30-2010, 11:20 PM
just call high angle drive line or check out his website at http://www.highangledriveline.com/yokes.html there are other places to get them at but jess has the best customer service from my experience and from others i have talked to

Sharpe
07-01-2010, 08:15 AM
Brazos Valley Drivelines carries Spicer u-joints, maybe yokes too.

robertf03
07-01-2010, 12:01 PM
just call high angle drive line or check out his website at http://www.highangledriveline.com/yokes.html there are other places to get them at but jess has the best customer service from my experience and from others i have talked to

its a driveshaft, how much customer service do you need? Did all the other driveshaft shops outsource their customer service to india?

agjohn02
07-01-2010, 12:33 PM
its a driveshaft, how much customer service do you need? Did all the other driveshaft shops outsource their customer service to india?

this is the problem with you kids nowadays. customer service means more than just answering my questions on the phone.

robertf03
07-01-2010, 12:36 PM
handy?

jerryg79
07-01-2010, 12:40 PM
handy?

i'll throw my hat in that ring!

agjohn02
07-01-2010, 12:44 PM
not by anyone who builds driveshafts, male or female.

DRAGOONRANCH
07-02-2010, 12:14 AM
Jess will go out of his way most every time to discuss what you need for your setup, and almost refuses to sell you something he thinks you don't need. While this can be a bit irritating at times, I bet this helps a good many folks out from spending needlessly. I have seen folks call him Saturday afternoon and get brainpicked for half an hour also. Not many folks will even answer their phone after 5 on Friday anyways.

bcolman
07-02-2010, 04:59 PM
he has hooked me up a few times, one time i landed on my driveshaft and he fixed it for free, all i had to do was pay shipping there, and there is no way this was under warrenty, i even told him i knew it was my fault and he said he would hook me up, second time was trying to figure out a 32 spline flange for my 205 and he told me junkyard parts to get instead of his 100 dollar bling ones which saved me about 75 bucks

DRAGOONRANCH
07-03-2010, 11:41 PM
I thought I saw some on tx4x4, but can't find it now.

eight
07-06-2010, 06:01 PM
I have or had a bunch of 1330 yokes, not sure if I still do, may have given them away.

stx4wheeler
07-06-2010, 09:26 PM
Hey don't be giving my yokes away Kopecki!!

eight
07-06-2010, 09:43 PM
I know I have your setup bearings.