PDA

View Full Version : Tate's Crap



Shaggy
09-16-2010, 11:12 AM
Off-Road Design Ford NP203/205 Doubler Tripple Sticked - $1500
Jeep TJ Dana 30 with aussie Locker and one spare shaft - $250
Ford NP 208 - $50
Borg Warner 1356 - $75
Pro-comp 6" lift Ford leafsprings - $150
Built 351M/c6 Combo - $1000
New in box Wire 10 fuse harness - $175
(4) 265x16 BFG KM2 tires on jeep wheels with certs (only ~5k miles on em) will also throw in spare 32x15 BFG KO 99% tread but has plug in sidewall - $550

I might add more later
________
Live sex webshows (http://livesexwebshows.com/)

NealtheDestroyr
09-16-2010, 11:30 AM
what lug pattern for the jeep tire/wheels?

bcolman
09-16-2010, 11:52 AM
next in line on the tires, would you be able to get them to college station or houston?

Shaggy
09-16-2010, 11:58 AM
5x4.5 and i am sure i could make arangements on cs or htown
________
How to roll blunts (http://howtorollablunt.net/)

Shaggy
09-16-2010, 12:03 PM
here is a pic of tire/wheel... these have been used off road and have rock rash
________
Novana Residence Condominium (http://pattayaluxurycondos.com)

agjohn02
09-16-2010, 12:07 PM
New in box Wire 10 fuse harness - $175


What is this for?

colman
09-16-2010, 12:08 PM
we need the tires for our youngest bros truck. would you separate the wheels and tires

Shaggy
09-16-2010, 12:09 PM
it is universal but I had it for the bronco. I paid 265 for it. I could look in the bronco thread and find out what it is actually called
________
Medical marijuana seeds (http://marijuanaseeds.org/)

colman
09-16-2010, 12:09 PM
also i'm curious about the wiring harness. is it universal?

Shaggy
09-16-2010, 12:11 PM
we need the tires for our youngest bros truck. would you separate the wheels and tires

550 is a good enough price for the tires alone. you can buy they and separate if you want. I paid something like 1100 for them so a little wear and half price
________
California Medical Marijuana Dispensaries (http://california.dispensaries.org/)

Shaggy
09-16-2010, 12:11 PM
also i'm curious about the wiring harness. is it universal?

si
________
Easy vape vaporizer review (http://vaporizer.org/reviews/)

Shaggy
09-16-2010, 12:14 PM
centech GV10
________
Problems From Avandia (http://www.classactionsettlements.org/lawsuit/avandia/)

JB
09-16-2010, 12:14 PM
what is the doubler ready to bolt up to?

Shaggy
09-16-2010, 12:15 PM
it is currently bolted to the c6
________
Vaporizer wiki (http://vaporizerwiki.com)

JB
09-16-2010, 12:18 PM
I'll have to research and see if I can make it work on an AOD then.

Shaggy
09-16-2010, 12:21 PM
should bolt right up
________
Park Royal 3 Condos Pattaya (http://pattayaluxurycondos.com)

DRAGOONRANCH
09-16-2010, 12:25 PM
5x4.5 and i am sure i could make arangements on cs or htown

I can get them to college station when you bring them to Alto...

:gigem:

Shaggy
09-16-2010, 12:26 PM
i would have to come to alto for that to happen... dont know if that will happen
________
California Dispensary (http://california.dispensaries.org/)

bcolman
09-16-2010, 12:26 PM
i could pick them up there to, but i was hoping to get them sooner if matt backs out

DRAGOONRANCH
09-16-2010, 12:33 PM
dont know if that will happen

boo!!

Shaggy
09-16-2010, 12:35 PM
if i go that is one less day progress on the jeep... Clayton is sneaking up on me
________
party Webcam (http://www.girlcamfriend.com/webcam/straight-couples/)

KrazyKarl02
09-16-2010, 04:37 PM
should bolt right up

Correct, C6, AOD, NP435, ford was all the same as far as I know.

JB
09-16-2010, 07:46 PM
So I would just be looking at new driveshafts and probably a support bracket? Does it go after or does it replace the "extension housing" on the AOD

Shaggy
09-16-2010, 08:34 PM
Take a pic of AOD. I think it goes after though. New crossmember, lengthen front shaft and shorten rear and that is it... Actually it is clocked so the floor might need some clearancing.
________
Super420 (http://camslivesexy.com/cam/Super420)

KrazyKarl02
09-16-2010, 09:31 PM
You will have to make your trans cross member into a "U" to clear the front driveshaft. Another crossmember for the doubler adapter and while not directly stated, it is a good idea to support the 205 some how. Also you will need new driveshafts. One outstanding thing is on the Klogger (~120" wheel base) the front and rear drive shaft w/ 1 tons are within an inch of each other, so you only need one spare!

uglyota
09-16-2010, 11:23 PM
spare what!? I just bring creighton and some 6011s

DRAGOONRANCH
09-16-2010, 11:46 PM
spare what!? I just bring creighton and some 6011s

:gigem:

DRAGOONRANCH
09-16-2010, 11:51 PM
You will have to make your trans cross member into a "U" to clear the front driveshaft. Another crossmember for the doubler adapter and while not directly stated, it is a good idea to support the 205 some how. Also you will need new driveshafts. One outstanding thing is on the Klogger (~120" wheel base) the front and rear drive shaft w/ 1 tons are within an inch of each other, so you only need one spare!

That must be one hella long drivetrain. At 118" wb on the beast my driveshafts are no where near equal length right now. Only carrying a single spare (or even having one at all :eek: ) would be nice.

:gigem:

Hot Pocket
09-17-2010, 12:37 AM
Nice rims... if someone just wants the tires, I'd be happy to work something out and take those rims off your hands :gigem:

Shaggy
09-17-2010, 08:40 AM
Two of the Rims have rock rash
________
VAPORIZER WIKI (http://vaporizerwiki.com)

bcolman
09-17-2010, 10:56 AM
if i end up with the tires the rims will be up for sale

colman
09-17-2010, 11:51 AM
ryan, what would you put those on. you don't have a late model jeep or a ranger/ explorer

bcolman
09-17-2010, 01:15 PM
would they fit his bronco?

colman
09-17-2010, 01:27 PM
nope, his bronc is 5x5.5 like cj's, old fords and sami's. the rims are 5x4.5 which is yj, tj xj etc and small ford 4x4's

Hot Pocket
09-17-2010, 04:13 PM
thanks for the info.. nevermind :gigem:

DRAGOONRANCH
09-17-2010, 04:24 PM
You can always rely on Colman to know plenty on all things that are ghey/jeep. ;)

colman
09-17-2010, 07:08 PM
ive got to be useful something besides my pretty face

edited for posterity

colman
09-17-2010, 07:18 PM
better?

Shaggy
09-18-2010, 08:37 PM
bump.... everything is still up for grabs
________
Live Sex Webshows (http://livesexwebshows.com/)

breckboarder55
09-19-2010, 12:22 PM
Aussie and spare shaft $$$?

Shaggy
09-27-2010, 01:20 PM
Off-Road Design Ford NP203/205 Doubler Tripple Sticked - $1500
Jeep TJ Dana 30 with aussie Locker and one spare shaft - $250
Ford NP 208 - $50
Borg Warner 1356 - $75
Pro-comp 6" lift Ford leafsprings - $150
Built 351M/c6 Combo - $1000
New in box Wire 10 fuse harness - $175


Bump
________
GONG BONGS (http://glassbongs.org/)

Shaggy
10-15-2010, 08:17 PM
Edit wasn't working so update

Off-Road Design Ford NP203/205 Doubler Tripple Sticked - $1300 (John Brown you know you want it) New Price. as low as I will go
Dana 30 aussie Locker two short and one long shaft - $200
Ford NP 208 - $50
Borg Warner 1356 - $75
Built 351M/c6 Combo - $1000
New in box centech GV10 harness - $175
Stock TJ NP231 with only 26k Miles $125
________
COLORADO DISPENSARIES (http://colorado.dispensaries.org/)

texasxj
10-16-2010, 10:36 AM
specs on 208?

Shaggy
10-16-2010, 11:29 AM
came out of my 1980 bronco. chain case with a good low range like 2.48:1 i think
________
TsLike2SuckU (http://camslivesexy.com/cam/TsLike2SuckU)

Shaggy
10-16-2010, 12:39 PM
Aussie and didn't someone want my quick disconnects?
________
Sunset Boulevard Residence Prathumnak (http://pattayaluxurycondos.com)

NealtheDestroyr
10-16-2010, 05:26 PM
How much are you asking for the disconnects?

Shaggy
10-16-2010, 07:48 PM
50
________
BUY GLASS PIPES (http://glasspipes.net/)

texasxj
10-17-2010, 11:14 AM
ok let me do a little more research, go ahead and put my name on the 208. What's the spline count?

where are you in SA? Im in St. Hedwig now.

Shaggy
10-17-2010, 01:15 PM
Close to 281 and 1604. Case is 31spline
________
condominiums Pattaya (http://pattayaluxurycondos.com)

Sparling
10-17-2010, 01:18 PM
I'm headed back to CS in a couple of hours if you need anything to make it's way to CS.

texasxj
10-19-2010, 03:33 PM
Tate sorry, go ahead and take my name off of the 208. Obviously like I suspected the spline count in wrong. It's amazing what you can find in your own shop if you just look for it!

Shaggy
11-11-2010, 12:31 PM
http://www.texasoffroad.net/albums/lonestar/album665/04_TJ_Cage_Windshield_tie_in_bars.sized.jpg

http://www.texasoffroad.net/albums/lonestar/album665/33_Gallon_Gas_Tank.sized.jpg

http://www.texasoffroad.net/albums/lonestar/album665/80_Bronco_Steering_Column.sized.jpg

http://www.texasoffroad.net/albums/lonestar/album665/351M.jpg

http://www.texasoffroad.net/albums/lonestar/album665/2000_F150_Dust_Shields.jpg

http://www.texasoffroad.net/albums/lonestar/album665/2000_F150_Rotors.jpg

http://www.texasoffroad.net/albums/lonestar/album665/B_M_Floor_Shifer_01.jpg

http://www.texasoffroad.net/albums/lonestar/album665/B_M_Floor_Shifer_02.jpg

http://www.texasoffroad.net/albums/lonestar/album665/BFG_KM_Tires_01.jpg

http://www.texasoffroad.net/albums/lonestar/album665/BFG_KM_Tires_02.jpg
________
Vaporizer-info.com (http://johan-luis.tumblr.com/)

Shaggy
11-11-2010, 12:37 PM
http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Booster.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Brake_Pedal_Assembly.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Door_Hinges.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Door_Seals.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Radiator.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Top_Bedlined.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Bronco_Rear_Bumper.jpg

http://www.texasoffroad.net/albums/lonestar/album665/BW_1356.jpg

http://www.texasoffroad.net/albums/lonestar/album665/C6.jpg

http://www.texasoffroad.net/albums/lonestar/album665/CAT_Radiator.jpg
________
E-cigarettes (http://www.ecigarettes123.com/)

Shaggy
11-11-2010, 12:42 PM
http://www.texasoffroad.net/albums/lonestar/album665/Control_Arm_Hardware.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dana_30_Calipers.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dana_30_Dust_Shields.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dana_30_Rotors.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dana_30_shafts_and_tie_rod.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dana_30_Unit_Beering.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dana_35_Drums.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Drive_Shafts.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Dual_Optima_Mount.jpg

http://www.texasoffroad.net/albums/lonestar/album665/F350_Front_Leaf_Spring_Shackles.jpg
________
VAPORIZER WIKI (http://vaporizerwiki.com)

Shaggy
11-11-2010, 12:46 PM
http://www.texasoffroad.net/albums/lonestar/album665/F350_Front_Leaf_Springs.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Flowmaster_3_inch_in_and_out.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_Hood_Brackets.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_Leaf_Spring_Hangers.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_Master_Cylinder.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_NP208.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_Ranger_4_56_Gears_with_Welded_carrier.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_Ranger_Axle_Shafts.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Ford_Shackles.jpg

http://www.texasoffroad.net/albums/lonestar/album665/GM_30_Spline_Dana_60_Stub_Shafts.jpg
________
Claudette (http://camslivesexy.com/cam/Claudette)

Shaggy
11-11-2010, 12:50 PM
http://www.texasoffroad.net/albums/lonestar/album665/Heavy_Duty_Umbrella_Stand.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Jeep_Tow_Bar_Mount.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Master_Cylinder.jpg

http://www.texasoffroad.net/albums/lonestar/album665/NP208_Shifter.jpg

http://www.texasoffroad.net/albums/lonestar/album665/NP_231.jpg

http://www.texasoffroad.net/albums/lonestar/album665/ORD_NP203_NP205_Doubler_Tripple_Sticked.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Poly_Body_Mounts.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Power_Master_Altinator.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Random_Brackets.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Slightly_Used_Upper_Control_Arms.jpg
________
Vaporizer wiki (http://vaporizerwiki.com)

Shaggy
11-11-2010, 12:52 PM
http://www.texasoffroad.net/albums/lonestar/album665/Small_Press.jpg

http://www.texasoffroad.net/albums/lonestar/album665/Sway_Bar_Quick_Disconnects.jpg

http://www.texasoffroad.net/albums/lonestar/album665/TJ_Front_and_Rear_Control_Arms.jpg

http://www.texasoffroad.net/albums/lonestar/album665/TJ_Front_and_Rear_Sway_Bars.jpg

http://www.texasoffroad.net/albums/lonestar/album665/TJ_Front_and_Rear_Track_bars.jpg

http://www.texasoffroad.net/albums/lonestar/album665/TJ_Rear_Control_Arm_Drop_Bracket.jpg

http://www.texasoffroad.net/albums/lonestar/album665/TJ_Shocks_Stock.jpg

http://www.texasoffroad.net/albums/lonestar/album665/TJ_Skidplate.jpg
________
Buy new condo in Pattaya (http://pattayaluxurycondos.com)

bcolman
11-11-2010, 06:50 PM
since there are no prices i will assume it is all free and I will pick it all up saturday or sunday which ever works better for you :D

Shaggy
11-12-2010, 02:41 PM
I have been very busy at work. It took long enough to upload all those pics. I will add info later on
________
WEB SHOWS (http://livesexwebshows.com/)

bcolman
11-13-2010, 12:21 PM
I have been very busy at work. It took long enough to upload all those pics. I will add info later on

i figured as much with your other posts, i was just trying to give you a hard time

JB
11-14-2010, 01:21 PM
Steering column, door hinges, rear bumper. Would like to pay very little, meaning not normal Tate prices.

And info on the alternator. Not sure I can make it work on the stock 88+ bracketry.

TdmayfieldIV
11-14-2010, 04:32 PM
Still have the headers?

Shaggy
11-17-2010, 07:59 AM
The altinator is a 140 watt Powermaster. one bad dood
________
Avandia class action lawsuit (http://classactionsettlements.org/)

Shaggy
11-17-2010, 07:59 AM
Still have the headers?

yes they are currently bolted to the engine.. you want?
________
Meliya (http://www.girlcamfriend.com/cam/Meliya/)

TdmayfieldIV
11-17-2010, 09:11 AM
gimme a special deal on the alternator and headers

is that a f350 brake booster I see there? I want it too

will you separate the c6? I want that too.

Maybe rear bumper too

I might need to get a student loan.........

F.O john brown I'm trying to catch up with you here

DRAGOONRANCH
11-17-2010, 09:31 AM
credit card!!!!

Shaggy
11-17-2010, 01:30 PM
it is a bronco booster. my f350 one walked off. I will separate the c6
________
VICENTSEX live (http://camslivesexy.com/cam/VICENTSEX)

Shaggy
03-04-2011, 08:48 PM
I still have a lot of the stuff pictured. anyone interested in any of it. Someone is coming for the b&m floor shifter tonight... so last call to tamor if you really need it
________
Vape Info (http://johan-luis.tumblr.com/)

cj nut
03-30-2011, 03:09 PM
Do you still have the 285's

colman
03-30-2011, 03:38 PM
they were 265's and they are now on my little brothers z71

Shaggy
03-30-2011, 06:06 PM
I do still have the 285s but someone is coming to look at them tomorrow.
________
Live sex (http://livesexwebshows.com/)

cj nut
03-30-2011, 11:24 PM
Colman- look at the picture is says "285" kinda obvious....
Tate-If they dont buy them let me know, I have a buddie that needs some pretty bad.

Shaggy
03-31-2011, 07:05 AM
Price is $185 on those. If the guy doesnt pick them up I will bring them to TCC and they can make their way to College Station.
________
Live sex (http://livesexwebshows.com/)

Shaggy
04-01-2011, 08:36 AM
the guy never came over. Do you want them? I can bring them to TCC this weekend
________
Web shows (http://livesexwebshows.com/)

colman
04-01-2011, 12:49 PM
i was looking at the pics in the first thread. anyway... so how much tread is on those tires...

KrazyKarl02
04-01-2011, 12:56 PM
i was looking at the pics in the first thread. anyway... so how much tread is on those tires...

And here is where he tries to screw you on the price.

colman
04-01-2011, 01:33 PM
corey was the one trying to buy them, they just looked almost worn down in the pic and i didn't want him to get them and havea surprise

Shaggy
05-09-2011, 04:29 PM
TTT

I still have a lot of these things

to name a few things that I am tripping over

Bronco Top (Superlined)
285 BFG KM Tires
NP208
BW 1356
Dana 30 With Aussie and spare shaft
33 Gallon Ford gas tank
Rear bumper that I built for the bronco

I have a lot of the small stuff pictured above also but these are a few of the things getting in my way
________
Adrianaxxx cam (http://camslivesexy.com/cam/Adrianaxxx)

TdmayfieldIV
05-09-2011, 04:35 PM
How much for the tank? My gas tank is rusting and ****ing my $100 pump. Of course I don't have to pay to replace it I just defect it out at work, but nevertheless, it's annoying.

Shaggy
05-09-2011, 04:39 PM
Gas tank is the second pic in post #52 and bumper is pic number 7 in post #53
________
Roll A Joint (http://howtorollajoint.net/)

TdmayfieldIV
05-09-2011, 05:19 PM
how much for the tank

Shaggy
05-09-2011, 06:24 PM
$40
________
Live Sex (http://livesexwebshows.com/)

colman
05-09-2011, 11:07 PM
u never measured the tires....

Hot Pocket
05-10-2011, 02:13 AM
your links are all broken

cj nut
06-01-2011, 10:36 PM
I'm still interested in the tires btw. pending pictures....

Shaggy
06-02-2011, 09:32 AM
Sorry I Forgot completely. I will try to remember tonight. I will be out of town and then the country for the next week and a half so let's hope I remember.
________
White Widow Seeds (http://marijuanaseeds.org/)

Shaggy
06-03-2011, 09:59 AM
here is the worst tire
________
WAWLADY (http://camslivesexy.com/cam/WAWLADY)