PDA

View Full Version : Look at all my crap - Free! cleaning out the garage!



redcagepatrol
09-28-2010, 12:06 AM
It's not all free but close to it.
Make an offer on anything or just pick it up. I might trek over to Jerrys on Thursday if anyone on that side on town wants anything... Really, most of this stuff is free, just come and get it. I put $ next to the items I felt were worth something (more than me taking the time to sell and make money).

Toyota Parts:
$400 - 1 rear Toyota axle. All-Pro Chrmo shafts in place with bearings and bearing housings, axle housing with too much crap welded on it, 4cy 3rd member with stripped 4:10 gears, Lincoln locked
(4) Toyota OEM rear axle shafts– wide
(1) welded 4cyl carrier
(1) V6 3rd member with caps
$50 (1) V6 3rd member w 4.10 gears, Lincoln locked
$20 (1) V6 4:10 reverse cut (high pinion) gears on Lincoln locked carrier
Toyota 4.56 gears
(2) vented Toyota rotors
(2) 4 piston Toyota calipers
$20 - Toyota pitman arm, All Pro (old school), double sheer
$40 - Toyota steering box, drilled and tapped

Other Crap:
$300 OBO Warn 8K Winch, M8000, cable is not in great shape but still works fine.
$30 Warn 8K winch cable
(2) roller fairleads, one never used - $10
Set of Ford 9” shafts, 28 spline, I think small brg
D60 open carrier
D60 4:10 reverse cut (high pinion) gears - OEM
(2) D60 Ford knuckles
(2) D60 caliper brackets, cleaned and painted, Ford
(2) D60 Bearing hubs – Dodge external lock
Dodge D60 spindle
Box of Dodge mirrors – broken glass 2nd gen tow and stock sets
(2) Dodge chrome dually wheel insets
(2) multimeters - old school
Chevy 5.3 manifolds (2000 vinatge)
Dropped pitman arm – Dodge?
4” lift blocks
Free - (2) Bilstein B46-1072S shocks – need rebuild

Sharpe
09-28-2010, 12:12 AM
I'll take the Bilsteins.

colman
09-28-2010, 12:15 AM
what did you have those shocks on. they sound interesting. if i can make them work i will take them. what did you have them valved for....

eight
09-28-2010, 12:16 AM
I'll take the dodge d60 parts. I should be up in your area some time this week.

DRAGOONRANCH
09-28-2010, 12:35 AM
I'll take the winch and cable. Can someone bring it to alto?

Will PM for payment arrangements.

robertf03
09-28-2010, 01:15 AM
(1) welded 4cyl carrier
(1) V6 3rd member with caps
$50 (1) V6 3rd member w 4.10 gears, Lincoln locked

does the v6 3rd with caps have a carrier?

jerryg79
09-28-2010, 06:40 AM
mirrors fit my truck? if so dibs.

Busa
09-28-2010, 06:42 AM
I will take this stuff

D60 4:10 reverse cut (high pinion) gears - OEM

If no one takes them i need the Spindles \Dodge D60 spindle

KrazyKarl02
09-28-2010, 07:41 AM
(2) D60 Ford knuckles
(2) D60 caliper brackets, cleaned and painted, Ford

If these are for a Ford Kingpin axle, I will take them and I will be at Jerry's on Thursday.

redcagepatrol
09-28-2010, 07:58 AM
(1) welded 4cyl carrier
(1) V6 3rd member with caps
$50 (1) V6 3rd member w 4.10 gears, Lincoln locked

does the v6 3rd with caps have a carrier?

No - I broke it - what do you need this stuff for? did you get a Yota?

redcagepatrol
09-28-2010, 08:00 AM
mirrors fit my truck? if so dibs.

I don't think so, just for second gen. I'll verify. I think I might have all of the parts to put them on a third gen truck.

stx4wheeler
09-28-2010, 08:20 AM
I'd like the dodge 60 spindle if Busa passes on it.

Also, Scott if I bring busa's axle to jerry's can I give it to you then, or do you want me to drop it off at your casa some day so that I can help you unload it? It is just a housing and gears, all the other parts will be seperate.

colman
09-28-2010, 08:35 AM
jerry the mirrors for second and third gen are different... sorry

StevenAg03
09-28-2010, 09:34 AM
jerry the mirrors for second and third gen are different... sorry

right, but if im not mistaken, he probably has 3rd gen tow mirror arms and 2nd gen tow mirror heads. additionally, probably the 2nd gen regular power mirrors. also may have a broken 2nd gen power tow mirror concoction in there somewhere. this is what was in there when i seen the box a couple years ago anyway...

Jerry, if the above is true, you could have tow mirrors on your truck. However, manual tow mirrors SUCK unless you leave them up all the time, so i do...

jerryg79
09-28-2010, 09:37 AM
right, but if im not mistaken, he probably has 3rd gen tow mirror arms and 2nd gen tow mirror heads. additionally, probably the 2nd gen regular power mirrors. also may have a broken 2nd gen power tow mirror concoction in there somewhere. this is what was in there when i seen the box a couple years ago anyway...

Jerry, if the above is true, you could have tow mirrors on your truck. However, manual tow mirrors SUCK unless you leave them up all the time, so i do...

i have the mirrors, i just smacked something with one of them when i was in annapolis on the narrow streets, so i need the arm.

i folded my tow mirrors out once when i pulled scott's gooseneck...

breckboarder55
09-28-2010, 09:49 AM
I would make you an offer on the M8000, but I'm in **** up to my eye balls right now.

stx4wheeler
09-28-2010, 10:39 AM
Ed already claimed it I belive.

DRAGOONRANCH
09-28-2010, 11:05 AM
Ed already claimed it I belive.

Yep, stupid jeepers... :gigem:

robertf03
09-28-2010, 11:09 AM
No - I broke it - what do you need this stuff for? did you get a Yota?

no yota, doing rovota axles, thought I told you about my plan. I want an open diff though, lockrites are good enough.

redcagepatrol
09-28-2010, 11:27 AM
i have the mirrors, i just smacked something with one of them when i was in annapolis on the narrow streets, so i need the arm.

i folded my tow mirrors out once when i pulled scott's gooseneck...

Jerry - you have to take it all, not just the one arm... I'm tired of it in my garage...

Frick - yes, bring the axle to Jerrys, it will be like a swap meet b-day party...

sasquatch
09-28-2010, 11:30 AM
i'd like the winch for my trailer if ed doesn't end up with it.

also the ford knuckles and caliper brackets. could these make it to alto?

jerryg79
09-28-2010, 11:33 AM
Jerry - you have to take it all, not just the one arm... I'm tired of it in my garage...

Frick - yes, bring the axle to Jerrys, it will be like a swap meet b-day party...

that's fine i was planning on it.

redcagepatrol
09-28-2010, 11:34 AM
I thought about putting that thing on my trailer but figured it would be one more thing to deal with.

BTW - this winch works fine, but it is "well used". It's the one currently on the Patrol and I pull cable on that thing several times every trip. The little bars that hold the left and right side together are broken off...

jerryg79
09-28-2010, 11:39 AM
i'd like the winch for my trailer if ed doesn't end up with it.

also the ford knuckles and caliper brackets. could these make it to alto?

either karl or i can bring them.

KrazyKarl02
09-28-2010, 12:06 PM
If these are for a Ford Kingpin axle, I will take them and I will be at Jerry's on Thursday.

Hands off Cook!


either karl or i can bring them.

Jerry, Don't help him!

jerryg79
09-28-2010, 12:24 PM
Hands off Cook!



Jerry, Don't help him!

ok so clarke, karl will deliver them to alto for you.

DRAGOONRANCH
09-28-2010, 01:37 PM
Paypal sent. Can whomever is bringing the schwag to Alto bring the winch? Will compensate w/ beer or whatever.

Sharpe
09-28-2010, 01:42 PM
Jerry or Karl, can yall bring the shocks to Alto for me prety please?

redcagepatrol
09-28-2010, 01:52 PM
I'm going to have a full truck heading over to Jerrys...

jerryg79
09-28-2010, 02:04 PM
that's fine we'll figure it out.

eight
09-28-2010, 02:42 PM
Hey yall stay away from my spindle.

sasquatch
09-28-2010, 07:01 PM
Hands off Cook!



Jerry, Don't help him!

oh didnt see that. oh well i dont really need them

RCcola55
09-28-2010, 08:21 PM
ok so clarke, karl will deliver them to alto for you.

what am I getting?

jerryg79
09-28-2010, 08:39 PM
i suck.

DRAGOONRANCH
09-28-2010, 10:21 PM
i suck.

new app for the eyephone?

redcagepatrol
09-28-2010, 10:41 PM
it wouldn't save my EDIT so I am just reposting here:

Toyota Parts:
EDIT: $275 - All-Pro Chrmollly axle shafts with installed bearings, seals, bearing housings, studs and lug nuts. These shafts only have two runs on them
EDIT: 4cyl 3rd member with stripped 4:10 gears, Lincoln locked
(4) Toyota OEM rear axle shafts– wide
Flem - (1) welded 4cyl carrier
Flem - (1) V6 3rd member with caps
Flem - $50 (1) V6 3rd member w 4.10 gears, Lincoln locked
$20 (1) V6 4:10 reverse cut (high pinion) gears on Lincoln locked carrier
Toyota 4.56 gears
(2) vented Toyota rotors
(2) 4 piston Toyota calipers
$20 - Toyota pitman arm, All Pro (old school), double sheer
$40 - Toyota steering box, drilled and tapped
Warn premium hubs for IFS truck, one has water damage and needs to be rebuilt with new parts

Other Crap:
Ed - $300 OBO Warn 8K Winch, M8000, cable is not in great shape but still works fine.
Ed - $30 Warn 8K winch cable, brand new
Ed gets one - (2) roller fairleads, one never used - $10
Set of Ford 9” shafts, 28 spline, I think small brg
D60 open carrier
Busa - D60 4:10 reverse cut (high pinion) gears - OEM
Karl - (2) D60 Ford knuckles
Karl - (2) D60 caliper brackets, cleaned and painted, Ford
Kolpecker - (2) D60 Bearing hubs – Dodge external lock
Busa? - Dodge D60 spindle
Jerry -Box of Dodge mirrors – broken glass 2nd gen tow and stock sets
(2) Dodge chrome dually wheel insets
(2) multimeters - old school
Chevy 5.3 manifolds (2000 vinatge)
Dropped pitman arm – Dodge?
4” lift blocks
Sharpe - Free - (2) Bilstein B46-1072S shocks – need rebuild

Still plenty of stuff to get

AggieTJ2007
09-29-2010, 09:39 AM
I will take both of the multimeter I will get at Alto just put with eds crap

colman
09-29-2010, 08:11 PM
do you remember which mirror was busted on the tow mirrors cause i have a good pass side tow mirror for a second gen

stx4wheeler
09-29-2010, 10:19 PM
Scott would you have any dodge 60 front spindle studs? I need three or four to complete my axle, if so can you bring them to jerry's?

jasonjuch
09-29-2010, 11:35 PM
if this stuff can make its way to college station I could use the toyota axle shafts, calipers and rotors.

redcagepatrol
09-30-2010, 07:01 AM
not sure which one is broken, will find out tonight.

no spindle studs

the stock rear shafts of the All-Pro ones? I hope someone can take this stuff to CS, I'd sure like to get rid of these shafts and brake crap...

Busa
09-30-2010, 07:15 AM
Come to my parents on Sat and they can come get whatever there.

jasonjuch
09-30-2010, 03:53 PM
not sure which one is broken, will find out tonight.

no spindle studs

the stock rear shafts of the All-Pro ones? I hope someone can take this stuff to CS, I'd sure like to get rid of these shafts and brake crap...

just the stock free ones. i need to start making a pile of spares for clayton

eight
10-15-2010, 09:14 AM
Jason, I have the calipers and rotors. Find me at alto or I will send them to College Station with someone.

redcagepatrol
10-15-2010, 09:20 AM
just the stock free ones. i need to start making a pile of spares for clayton

I'll bring some with me to Clayton

Sharpe
10-17-2010, 03:21 PM
Got the shocks, thanks.

redcagepatrol
10-18-2010, 07:54 AM
maybe you can do something with them - I was just going to toss them...

jasonjuch
10-19-2010, 10:55 PM
Jason, I have the calipers and rotors. Find me at alto or I will send them to College Station with someone.


thanks man, i didnt make it to alto and i wont be back in college station till next monday but ill find them then, just let me know where you leave them

Sharpe
10-19-2010, 11:18 PM
I believe I have the calipers and rotors.

jasonjuch
10-20-2010, 04:13 PM
I believe I have the calipers and rotors.


thanks, ill hit you up as soon as I get back, ive been over to your place before for that hummer tire

85cj7
10-20-2010, 05:05 PM
thanks, ill hit you up as soon as I get back, ive been over to your place before for that hummer

:rainbow::rainbow::rainbow::rainbow::rainbow::rain bow:





Edit: Too Easy:flipoff2:

robertf03
10-20-2010, 05:36 PM
i love you scott