PDA

View Full Version : Parts from my blazer



bcolman
12-19-2011, 05:31 PM
1 plastic racing seat - $20

1 Dana 70 rear, 4.10 gears, welded, DIY4X disk brake kit, front d60 diff cover (thicker than stock rear cover) - $200

1 set ORD front suspension rear HD shackle hangers, greaseable - $100

1 set HD shackles, 7" bolt center to center - $20

1 pair chevy 52" springs, stock - $50

1 pair chevy 52" springs, no overload, with zero rates to move ale forward 1.5" - $100

1 pair front dodge dana 60 spring plates, modified for ubolt instead of studs on passengerside - $30

1 pair dana 70 spring plates - $30

1 steering column - $40 frick has dibbs

1 ORD steering box brace for 80-91 chevys - $80

1 hydro assist system, includes chevy pump, hoses, steering box, drop pitman arm, PSC ram, overflow can - $440

4 Interco Irok Radials, 39.5x13.5x16LT, 60-65% tread, rock rash, still hold air, 4 16x8 rims, staun internal beadlocks, atleast 1 tube blown, most likely 3 or 4 are blown, i have 1 or 2 new spares I will throw in - $1000

As of now the only part that I would take in a trade is a rear SRW 14 bolt with 4.10 gears and either open or with a detroit

Everything located in Houston near 610 and I10 on the west side, will ship on your dime

Pictures upon request

Everything located in Houston Texas 77055

I consider a part sold when I have money in hand or my paypal account.

Parts already sold:
2 Corebeau Suspension Seats, some tears on back of 1 seat - sold
4 Bilstein 5100 14" travel shocks, 35" extended, 21" collapsed - sold
1 plastic fuel cell, 12 gallon, 10x16x17.5 – sold
1 set ORD rear chevy 4" lift shackle flip - sold
1 pair wheel spacers, 8x6.5, 1.5” - sold

tommy53002
12-19-2011, 06:10 PM
Does the fuel cell have a sending unit?

bcolman
12-19-2011, 06:13 PM
nope, but i am sure there is an aftermarket one you could get

TdmayfieldIV
12-19-2011, 06:14 PM
Pics of the seats?

bcolman
12-19-2011, 06:19 PM
Pics of the seats?

19001
19002

TdmayfieldIV
12-19-2011, 06:38 PM
I'll give you $100 + a 10" subwoofer and the blanks from the penis windchime for them.

bcolman
12-19-2011, 06:47 PM
for that price i will keep them for the new build

TdmayfieldIV
12-19-2011, 06:53 PM
I was trying pawn starts negotiating. I'll get back to you.

Sparling
12-19-2011, 07:18 PM
I'll give you 2 brand new 12" alpine r series subs for the seats. Subs are still in box

AggieTJ2007
12-19-2011, 10:30 PM
I want the seats and one set of billstien shocks

Cash

TdmayfieldIV
12-20-2011, 12:28 AM
I may want the second set of shocks.

BroncoJo
12-20-2011, 12:35 AM
I may take the fuel cell but I would be in the $50 range.

bcolman
12-20-2011, 09:22 PM
I want the seats and one set of billstien shocks

Cash

seats are pending, just waiting on the money to clear, shocks are still up for grabs

bcolman
12-20-2011, 09:22 PM
I may take the fuel cell but I would be in the $50 range.

60 and its yours

stx4wheeler
12-20-2011, 09:31 PM
How about $20 for the column. That's what you said this weekend anyway.

bcolman
12-21-2011, 09:09 AM
sounds good to me frick, i couldnt remember what i said, karl is buying a set of the springs so he may be able to pick it up for you, or the other way around

davido
12-21-2011, 10:31 AM
Does the fuel cell have a sending unit?

I'm using an external fuel pump from a 87 EFI Ford F150. Put a filter before and after the pump and you're set.

bcolman
12-21-2011, 10:42 AM
that is what i had on the blazer and will keep it the same on the new build

tommy53002
12-21-2011, 11:36 AM
If the cell is still around after Christmas i'll take it.

bcolman
12-21-2011, 12:36 PM
fuel cell and seats sold and shipped

KrazyKarl02
12-21-2011, 07:23 PM
I'm using an external fuel pump from a 87 EFI Ford F150. Put a filter before and after the pump and you're set.

I thought the 87 ford had an intank fuel pump?

85cj7
12-21-2011, 07:41 PM
I thought the 87 ford had an intank fuel pump?

Looks like they could have two, one internal, one external
http://www.autozone.com/autozone/parts/Airtex-Master-Fuel-Pump/1987-Ford-F150-1-2-ton-P-U-2WD/_/N-iilzuZ8vcz2?counter=3&filterByKeyWord=fuel+pump&fromString=search&itemIdentifier=386516_26874_3171_

JB
12-21-2011, 08:05 PM
My 86 has one in the tank and one on the frame.

StevenAg03
12-22-2011, 08:09 AM
Looks like they could have two, one internal, one external
http://www.autozone.com/autozone/parts/Airtex-Master-Fuel-Pump/1987-Ford-F150-1-2-ton-P-U-2WD/_/N-iilzuZ8vcz2?counter=3&filterByKeyWord=fuel+pump&fromString=search&itemIdentifier=386516_26874_3171_


My 86 has one in the tank and one on the frame.

this... in tank fuel pumps are low pressure pumps and the frame rail pumps are high pressure.

davido
12-22-2011, 08:58 AM
Yes, Flem told me the other day when I was getting a replacement, to be sure to get the external one, because they had two. Sorry to hijack your thread Coleman. Just trying to help you sell your ****. :)

Sharpe
12-22-2011, 09:11 AM
You probably have the E2000 Dave. I have the higher volume variation for my guzzler, its an E8something...

davido
12-22-2011, 09:30 AM
Yes, sounds about right.

http://www.amazon.com/Airtex-E2000-Electric-Fuel-Pump/dp/B000C1KHJG

bcolman
12-23-2011, 06:07 PM
all shocks sold

bcolman
12-27-2011, 09:45 AM
shackle flip sold