Jdewberry
09-22-2017, 10:55 AM
I figured it was about time to start a build thread on here for my jeep, since I've been building it for about a year now and have made some modifications to it. To start off I bought the jeep from a family friend for $200 who had used the jeep in the past as a hunting jeep in the 90s. After getting it running and driving I have been slowly modifying it, but after wheeling the jeep at the 2016 clayton run it had me longing for better suspension, stronger axles, a longer wheelbase and POWER STEERING!!!! So, over the past summer I went back to my parents to use my dad’s shop to tear all the stock suspension and axles out of it and replace them. For axles, I went with a GM 10 bolt front axle that I narrowed 4.25 inches so I didn’t have to outboard the front leaf springs and a rear dana 44 out of a postal jeep box van. When it came to suspension I wanted to stretch my wheelbase from the stock 83”to around 90”, so I used XJ rear leaf springs plus an extra main leaf to help axle wrap. Then in the front I used a set of rear stock CJ replacement leaf with poly bushings all running on 33” super swampers. And for all who don’t know me, my name is Jack Dewberry I am class of 2019 mechanical engineering major, and this is my third year in the club.
Future plans:
• SBC 350 with vortec heads and fuel injection
• Th400 or sm420 I can’t decide if I want an automatic or manual
• Dana 18 gear swap into my dana 20 to get 2.46:1 low gears
• Finish building and bracing my rollcage
• Put ranch rs44044 leafs in the front to get 2” of stretch
• Hi steer with hydraulic assist
• 37s if I can find a cheap set on craigslist
https://s26.postimg.org/ftg2pda0l/6967_C7_FC-_F3_BC-4369-_AAE4-5_AC1_D9145_A54.jpg (https://postimg.org/image/ftg2pda0l/)
https://s26.postimg.org/6a6dvwmid/F3_E3895_C-_A762-4699-_B8_CA-2_AF644333_DC4.jpg (https://postimg.org/image/6a6dvwmid/)
https://s26.postimg.org/nbz7y01dh/EA9_B8_B5_C-_C30_D-4_FBA-8931-6_F3_F29_A729_D0.jpg (https://postimg.org/image/nbz7y01dh/)
https://s26.postimg.org/5ag3077cl/24911684-0817-4027-_AB62-2_D955_A6150_C0.jpg (https://postimg.org/image/5ag3077cl/)
https://s26.postimg.org/xbyprn20l/6_BA89509-5344-42_BD-_B7_DD-316_F450641_C2.jpg (https://postimg.org/image/xbyprn20l/)
https://s26.postimg.org/cgcfge5th/177_A8_DDF-6_D6_A-4120-_BCF8-_B5_ADC8_A08_E0_E.jpg (https://postimg.org/image/cgcfge5th/)
https://s26.postimg.org/c4uz3mpdh/C0_EE804_D-_B68_E-43_F7-_BEDD-_CF9_D74_EC6790.jpg (https://postimg.org/image/c4uz3mpdh/)
https://s26.postimg.org/j9cscnwmt/32704_DDC-_E59_D-44_CB-_B124-_DA9487_D59_F14.jpg (https://postimg.org/image/j9cscnwmt/)
https://s26.postimg.org/ghtim1y45/4_CBD4153-_A422-439_E-82_BB-_A5804_B6037_D6.jpg (https://postimg.org/image/ghtim1y45/)
https://s26.postimg.org/j0f7mqjud/unnamed.jpg (https://postimg.org/image/j0f7mqjud/)
Future plans:
• SBC 350 with vortec heads and fuel injection
• Th400 or sm420 I can’t decide if I want an automatic or manual
• Dana 18 gear swap into my dana 20 to get 2.46:1 low gears
• Finish building and bracing my rollcage
• Put ranch rs44044 leafs in the front to get 2” of stretch
• Hi steer with hydraulic assist
• 37s if I can find a cheap set on craigslist
https://s26.postimg.org/ftg2pda0l/6967_C7_FC-_F3_BC-4369-_AAE4-5_AC1_D9145_A54.jpg (https://postimg.org/image/ftg2pda0l/)
https://s26.postimg.org/6a6dvwmid/F3_E3895_C-_A762-4699-_B8_CA-2_AF644333_DC4.jpg (https://postimg.org/image/6a6dvwmid/)
https://s26.postimg.org/nbz7y01dh/EA9_B8_B5_C-_C30_D-4_FBA-8931-6_F3_F29_A729_D0.jpg (https://postimg.org/image/nbz7y01dh/)
https://s26.postimg.org/5ag3077cl/24911684-0817-4027-_AB62-2_D955_A6150_C0.jpg (https://postimg.org/image/5ag3077cl/)
https://s26.postimg.org/xbyprn20l/6_BA89509-5344-42_BD-_B7_DD-316_F450641_C2.jpg (https://postimg.org/image/xbyprn20l/)
https://s26.postimg.org/cgcfge5th/177_A8_DDF-6_D6_A-4120-_BCF8-_B5_ADC8_A08_E0_E.jpg (https://postimg.org/image/cgcfge5th/)
https://s26.postimg.org/c4uz3mpdh/C0_EE804_D-_B68_E-43_F7-_BEDD-_CF9_D74_EC6790.jpg (https://postimg.org/image/c4uz3mpdh/)
https://s26.postimg.org/j9cscnwmt/32704_DDC-_E59_D-44_CB-_B124-_DA9487_D59_F14.jpg (https://postimg.org/image/j9cscnwmt/)
https://s26.postimg.org/ghtim1y45/4_CBD4153-_A422-439_E-82_BB-_A5804_B6037_D6.jpg (https://postimg.org/image/ghtim1y45/)
https://s26.postimg.org/j0f7mqjud/unnamed.jpg (https://postimg.org/image/j0f7mqjud/)