junked 93 f250

[william_ace]

OK i have a wrecked 1993 f 250 4X4 5 speed Diesel thats about to go to the junk yard. If i paint his shed he said i can have it rather than him selling it to the salvage place. the body is totalled, every peice is messed up. but mechanically what should i take off of it before it goes to the scrap yard. anything with the TTB worth taking? i know i'll grab the motor trans t case and rear end, but anything else worth taking apart? springs, brackets?

[jerryg79]

OK i have a wrecked 1993 f 250 4X4 5 speed Diesel thats about to go to the junk yard. If i paint his shed he said i can have it rather than him selling it to the salvage place. the body is totalled, every peice is messed up. but mechanically what should i take off of it before it goes to the scrap yard. anything with the TTB worth taking? i know i'll grab the motor trans t case and rear end, but anything else worth taking apart? springs, brackets?

When is it going to the junk yard? My room mate may want some pieces off of it since he has that exact truck, but he wont be back in town until after the 5th.

[william_ace]

we'll send it off when i get done with it. which wont be for a while. but he still has to file the proper paper work with the state since it was an "abandoned" vehical, to make it final that its his. anyhow, i guess just lemmie know.

[eight]

I'll take some peices of the ttb if you're not gonna do anything with it. See if I can make it into something fun.

[BigRedFord04]

i'll trade you transmissions, that one wont bolt to your motor, but i could probably use pieces to fix mine. i'll even get the shift forks fixed for ya.

[william_ace]

some of the ttb stuff may be bent, actually im pretty sure it is. but we'll see what we can work out. hopfully he can get the title soon so i can start rippin into it before i have to come back to CS. but yeah, i'll get all the junk out that i can.

[usmcagg02]

what rear end does it have in it? what would you want for it?

[jerryg79]

what rear end does it have in it? what would you want for it?

Sterling 10.25, I think, Kopeki?

[eight]

Yep, sterling 10.25. Has a smooth center section, 35 spline 1.5" shafts, long full float hubs, standard 8 lug pattern, plenty of lockers and gears available, no carrier split. I don't see why more people don't use these, if it has 4.10 gears I'll trade you a 14 bolt for it. With that and the d50 parts and some d60 inners I could make a sterling 10.5/d55 front. Could make my jeep "origional", like a solid axled mazda. :flipoff2:

[AgDieseler]

How much for the engine? How many miles? Does it have a turbo? I know somebody that could use the engine, but probably doesn't need the turbo.

[william_ace]

dont know how many miles it has, i think 200k, but i would put my money on it that it still runs, i tried to start the motor but the ignition is broke, the key just turns and turns. its a 93 and it dont say turbo on the side, so i doubt that it has one. lemmie know.

[uglyota]

Since this is in tech-
if your exhaust routes up to something that looks like this:
http://store1.yimg.com/I/titanmotorsports_1800_10866990
before going out the tailpipes, it probably has a turbo :)

[Doug Krebs]

When is it going to the junk yard? My room mate may want some pieces off of it since he has that exact truck, but he wont be back in town until after the 5th.


Yeah Mike might want the tranny and transfer case to make his a 4x4. I heard him talk about it at one point in time.

[william_ace]

i know what a turbo is, im not stupid, well maybe a little, but the hood is smashed shut, i have to cut it off to see whats in there. i tried looking through the truck to see if there was a ford manuel anything, but there was not. so untill i take the hood off, it will be a mystery. oh yeah and it looks like its got a new starter in there too.

[BigRedFord04]

fyi...those starters go for about $400 at the parts stores. if its new and works ebay it up.

[william_ace]

heres some pictures of the truck.

[usmcagg02]

what condition are those wheels in?

[william_ace]

3 of the wheels are good, and the 2 rear wheels could use new center caps. not totally necessary but they are rusted pretty good.

[CRaSHnBuRN]

are the front shock towers any good?

[william_ace]

one is bent, i think, let me check tomorrow for sure.

[Mack84]

i want the transmission and the transfer case. How much do you want for them? And if it has a turbo i want it.

[william_ace]

well i dont know if it has a turbo yet because the paperwork hasnt gotten back to us yet, which means we cant cut the hood off yet. but, if it has one, you got it. as far as the trans im sure we can figure somthin out. but the t-case i think im gonna keep, but that may change too.

[BigRedFord04]

damn you jewish steve....thought we had a deal on the tranny? what the hell does she need it for...i dont think it'll bolt to the V6 in her camaro. :flipoff2:


PS. I'm pretty sure that was mike typing

[william_ace]

we'll see

[BigRedFord04]

*****

[william_ace]

basically man, aint nothin set in stone. meaning i still could get your trans. just gotta see.

[jerryg79]

basically man, aint nothin set in stone. meaning i still could get your trans. just gotta see.

Meaning, its all going on ebay fawkers, so y'all bid it up! :rolleyes: :flipoff2:

[BigRedFord04]

i want the turbo...and since i called it last i think i should get it. i'll drive anywhere right now to pick it up. :rolleyes: :rolleyes:

[jerryg79]

i want the turbo...and since i called it last i think i should get it. i'll drive anywhere right now to pick it up. :rolleyes: :rolleyes:

I think Oliver tried to call you house a minute ago to tell you he was gonna buy it out from under you!

PS Austin, I reserved parts for Mike with my post, and if you'll notice I'm the first one.....EAT IT! :flipoff2:

[BigRedFord04]

ahhh...but i did IM him minutes before you posted that and arranged a deal.

[Doug Krebs]

Maybe he could just cut it up with a torch and recycle it like tate did?

[fbronco86]

Maybe he could just cut it up with a torch and recycle it like tate did?

yeah or so you could get a **** load of money for it.

ok i dont want the tranny and t-case just cause i dont need more crap. but if it has a turbo i would like that.

thanks and gig'em

[william_ace]

i told tate about that truck too. i wish this one was a 350 though :rolleyes: oh well

[Seth]

what color is the interior?

[william_ace]

gray

[Seth]

I might want the seat out of it - good shape? buckets? bench? etc? i thought about carpet - but im thinkin its not gonna be one of those things i can buy used - want something i can slip over the rubber and pull it in and out. anywho

[william_ace]

yah the seat is a bench, and its in good shape. im gonna tkae the carpet out and pressure wash it and see how that turns out. lemmie know.