PDA

View Full Version : Finally......



aggiemudman
08-09-2004, 10:05 PM
Well its finally here. The Heavy Chevy is finally FUEL INJECTED! Started gathering parts for a tpi swap a couple of weeks ago. Friday afternoon i started takin the old off and cleaning. Saturday i started on with the new. Sunday was mainly wiring and today i finally finished it up and it RUNS!!!! Still gotta few bugs, idles not quite right but its gonna be a easy fix hopefully. Any one any good at tuning these things?

robertf03
08-09-2004, 10:23 PM
congrats. '730 ecm?

Fredo
08-10-2004, 01:12 AM
Looks good....non-maf system though.....that thing isn't going to like mods at all. Check all your vacuum lines, check to make sure the throttle position sensor is within range, and you have no exhaust leaks near the 02 sensor.....that should help the idle....unless the system doesn't like the cam you have, or your motor has a lot of knock due to roller rockers or high mileage......then it's chip burning time.

BigRedFord04
08-10-2004, 07:40 AM
how much did everything run you?

uglyota
08-10-2004, 10:35 AM
what is with you new guys and getting stuff done?
you must not be :cheers: enough
:D
just kidding, that's sweet!

aggiemudman
08-10-2004, 06:27 PM
nah its the maf system. just cant see it. its on the driver side. from an 88 gta. computer is a 165 from an 86 camaro with a hypertech chip. ya its pretty sweet. drove it on the highway today and ran great. its runnin really hot. its gotta 192 thermostat but its runnin at like 205. gotta figure out what the deal is. still finishin up loomin all the wires and tyin them back. cleanin up the install a little bit. all together ran me about 800. gotta extra harness nad computer if anyone needs one.

BigRedFord04
08-10-2004, 06:32 PM
guess you can change your sig now. its not like i have any $$ right now, but how much you wantin' for the comp and harness?

davido
08-10-2004, 11:24 PM
What would you use that for Austin?

robertf03
08-10-2004, 11:31 PM
hope you didn't pay for the hypertech chip, I know a guy who has the .bin for an 88 hypertech chip :)

Fredo
08-11-2004, 12:52 AM
i've got a 92 hypertech chip for a camaro sitting in a drawer somewhere so there... :p