XJ coils and spacers

[texasxj]

I have 2 2" and 2 3" rancho coils for most cherokees. I also have control arms for both sets and 4 3" rancho 5000's. Also 2 2" teraflex coilspacers that will fit a cherokee and maybe some grand cherokees. Make offer-I just need some cash!!!!

[BigRedFord04]

http://tamor.org/forums/showthread.php?t=4505

[junior88mj]

what kind of control arms? stock , tube type ,

[savvyaggie]

What type of ends do ths shocks have and how long are they extended and compressed??

[stx4wheeler]

jordan run f-350 stock 4x4 shocks on your rear thats what i got and i think they are gonna be just right.

[texasxj]

control arms 2" and 3" straight rectangle shape

shocks-rancho 5000 3" 2 bolt bottom single stud through fender area to engine compartment(front) single horizontal stud top and bottom w/ custom top bracket

all of this stuff is barely used-not kidding!!!!!

ATTN:all 3" stuff is currently on my xj-but will be off by jan at the latest?????

[junior88mj]

how much for the control arms? do you have pics of them?

[texasxj]

how much for the control arms? do you have pics of them?

20 bucks for 2" or 3" or both 30-i dont need them just want to get rid of them!! no pics but they are ranchos, copper plated or gold paint-kind of scratched but no dents or dings and red bushings. 2" you can have but if you want the 3" i could take em off jeep-its just sitting anyway.

[texasxj]

hey mj ill try to get some pics up this wknd if you are still interested

[sasquatch]

If the coils will fit on my ZJ, i'll take them. Basically I'll buy anything that fits the ZJ off you. I need a few inches under that thing.

[texasxj]

well rcook i dont know if they will or not but i do have some 2" coilspacers that were used on a zj. i may be using 2 of 4 here in a month or two so 2 wouldnt help much-your zj is coils all around right?
measure you coil plates and let me know what the diameter is and i will measure the coils and give a buddy of mine a shout

[stx4wheeler]

if i remember correctly all zj, xj, and tj have the same size and type of coils not 110% sure some body that knows jeep stuff correct me.

[JeepPhisherman]

they all have the same coil sizes, just different rates. 4.5" zj coils lift an xj a little more than 5"

BTW I've also got 4.5" springs, leafs, and lower control arms, and I think ive still got an adjustable trak bar laying around somewhere

[bburris]

The front coils all have the same diameter, but are different heights. I have XJ 6" lift springs on my TJ and they're supposed to be ~8" for me. TJ and ZJ/WJ rear coils are different as well, but I can't remember what the diff. is.

RCook - If you want a cheap lift for your Grand then get a set of four spacers.

[texasxj]

well rcook i do have 2" and 3" which maybe would keep you level but not sure. ditto on the spacers-ill sell ya 2 because the other are going on my xj for sure-to complete my 11"-hehehehe

[stx4wheeler]

11 inches are you nut clayton, i had a friend in highschool that had 8 or eight and a half with 35's and he didnt even have to trim fenders at all no rub even when flexed and the thing was freakin massive.

[texasxj]

yes sir im nuts may cut down to nine-35's or 37's are as big as i want to go anyway-already have lots of fender trimming and plan to do a lot more-i want lots of flex

[JeepPhisherman]

Man evan 9" is pretty crazy high. With 37s you're going to need some ford 9's or something, so you might as well just keep it low, go fullsize and keep them tires outside of the body.
Either that or skip pass all the week stuff and step on up to some coilovers.
I'm sure you've seen it, but check out fullsizexjgear.com or fullsizexj, something like that.

[texasxj]

phisherman-that blue xj is wicked-40s are to big for me-on a xj.
what do you mean by ford 9's-axles? as for coilovers this jeep isnt worth it so far or maybe at all

[BigRedFord04]

Ford 9" rearend w/ chromo shafts and D44 front w/ chromo shafts and CTMs will hold up well to 37"s. "DoIt!"

[JeepPhisherman]

Ford 9" rearend w/ chromo shafts and D44 front w/ chromo shafts and CTMs will hold up well to 37"s. "DoIt!"

ditto
what running gear you have planned for these 35/37's?

[Shaggy]

he cut the chit out of his fenders

[junior88mj]

20 bucks for 2" or 3" or both 30-i dont need them just want to get rid of them!! no pics but they are ranchos, copper plated or gold paint-kind of scratched but no dents or dings and red bushings. 2" you can have but if you want the 3" i could take em off jeep-its just sitting anyway.


hey texasxj i'll take both sets of control arms and may be a set of spacers you can call me after 10am at 820-2252 sunday or i'm off work monday 25th after 10am would be good too

[sasquatch]

I'll buy both sets of coils and the spacers. How much?

[texasxj]

allright bidders start your calculators-ill finish all this up this wknd so keep checkin the forums
hey bigred i beat you to it-**** ford already have 14 bolt rear and am going to get a 60 from cody-thanks for suggestions though

[texasxj]

hey mj ok both sets control arms-yours-$30 2" spacers-$50
ill throw in a set of add a leafs-about 1.5" $20
$100 for all-sound like a plan??? ill give you a shout sun and maybe meet up mon aft?-thanks alot

[texasxj]

hey robert i also have 3" shocks-definitely need w/ coils-$100

[sasquatch]

uh, if they fit. I haven't replaced the shocks ever. Prob need new ones. But I need the coils over anything else.

[texasxj]

robert and mj- i will have all of this stuff with me next week so yall can have a hayday-like little kids in the candy shop
mj-ill give you a shout on sun
robert-call you sat

[sasquatch]

Yea. Call me whenever. My zj is screaming for a lift.

[texasxj]

hey robert got the coils off-there in my truck-you wanna meet up tommorow after 2

[texasxj]

mj got all your arms and spacers-you wanna meet me around 2 tommorow-maybe robert and you can meet me at same place????

[sasquatch]

Yea, That'll work.

[texasxj]

Yea, That'll work.

allright call you around 145