View Full Version : bronco front axle spindle
Ford Bronco God
11-07-2004, 10:31 AM
I need a ……… front axle spindle ……drivers side…I have a 1989 ford bronco full size 5.0... If anybody has one laying around….. :gigem:
BigRedFord04
11-07-2004, 11:36 AM
i hear they're only like $300 at the Ford house. :D
tate might have one, and he'll probably only charge you $150. they're really hard to find in the junkyards b.c. TTB used like 4 different spindles in its lifetime (i.e. ABS, no ABS, 5 bolt spindle, 6 bolt spindle, etc).
Ford Bronco God
11-08-2004, 12:31 AM
ouch
stx4wheeler
11-08-2004, 01:51 AM
when i had to rebuild my front axle in my 78 bronco,i had to get a hub with lugs from a late eighties model, and i checked and all models from like 78-88 all had the same bearing part number so i assume they are all the same spindle, after 89 or so i could see maybe some changes. maldonados junkyard on hwy six, before navasota has one or two late eighty model broncos i think as of last time i drove by, you might check those out, might be a little less cash. check ebay also when you find out what exactly you will need.
BigRedFord04
11-08-2004, 11:13 AM
when i rebuilt my 44 for the SAS i used the hubs and rotors off my TTB...it was the same...the spindles are different b.c. of the # of bolt holes in 'em that hold 'em to the knuckle, not b.c. of the bearings...those should all be the same too, BCA p/n's A35 and A37...on half ton stuff anyway.
stx4wheeler
11-08-2004, 08:39 PM
yeah i know what you meant, i was just giving him more info, and other avenues to search on.
Shaggy
11-29-2004, 10:46 AM
i would have to see which ones you need but i believe that i have 2 different ones
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.