PDA

View Full Version : Nice Stroke Dyno Numbers



Chadnutz
11-09-2004, 10:55 AM
http://www.tamor.org/members-rigs/albums/Movies/Johnboy.sized.jpg

This guy hasn't upgraded to a Soopty Doopty high pressure oil pump so he can't even go past half throttle before throwing a CEL for loss of oil pressure. Basically, the 94-97 HPOPs can't push enough fuel through larger injectors.

What are some high Cummins numbers?

His mods:
Bottom end is balanced
Cut pistons bringing compression down to about 13.9
DPS Extreme Puling cam
Ported and Polished heads
DPS pushrods
Comp cam valve springs
DPS Head studs
Stock head gaskets
Swamp 350cc injectors with .12 nozzles
Compound turbos (h2e and ht4b)
Two stock superduty electric fuel pumps with aeromotive regulator
Brian's Truck Shop Transmission

eight
11-09-2004, 12:10 PM
What are some high Cummins numbers?


Well over 1000. With much less mods. Just a big ass or twin turbos, big injectors, custom program, and o-ringed heads.

Lets see what I can find.

eight
11-09-2004, 12:26 PM
Here's one that maxed the graph. 710/1421 Its a 98 12 valve, don't know the mods.

http://www.dieselperformancemotorsports.com/Rickgraph.jpg

eight
11-09-2004, 12:50 PM
Here's one with just DD2 75 hp injectors, one DD max boost turbo, and DD ultimate fueling module. Shows the graphs for all settings of the module.

Baseline truck - Stage 2 w/Max Boost Turbo - (Dark Green graph) 306hp/604tq
Setting 1 - (Pink graph) 357hp/736tq
Setting 2 - (Purple graph) 416hp/847tq
Setting 3 - (Bright Green graph) 440hp/901tq
Setting 4 - (Blue graph) 456hp/926tq
Setting 5 - (Red graph) 460hp/932tq

http://www.dieseldynamics.com/popup/images/ultlevels-tq.jpg

BigRedFord04
11-09-2004, 03:23 PM
Bedwetter's truck dynoed over 1100ft/lbs. he's got an intake, 4" exhaust, bigger fueling box, injectors (maybe?), gauges and a TST box.

chevsu
11-09-2004, 05:16 PM
all that modifing for those little numbers. i'm sure glad i drive a real truck.

Chadnutz
11-09-2004, 06:53 PM
Is my drive shaft done you some***** pile of monkey nuts? :D Cody holds up progress on the Mazda. :flipoff2:

stx4wheeler
11-09-2004, 08:20 PM
lets keep the mazda gayness in its own 40 page thread please!!! thanks and gig'em.

Chadnutz
11-09-2004, 09:02 PM
Where is your pile, *****? :flipoff2:

redcagepatrol
11-10-2004, 08:23 AM
Bedwetter's truck dynoed over 1100ft/lbs. he's got an intake, 4" exhaust, bigger fueling box, injectors (maybe?), gauges and a TST box.
no injectors, just the fueling box and a FASS system. That thing is QUICK!

bburris
11-10-2004, 12:17 PM
Has he figured out how to drive a stick yet?

StevenAg03
11-10-2004, 01:13 PM
all signs point to no....have you ever ridden in it with him?

BigRedFord04
11-10-2004, 01:42 PM
he's gonna need a new clutch soon i guarantee it. the stock clutches are only rated to ~900ft/lbs....and as mentioned....he doesnt drive a stick very well. i told him that needs to be the next thing on his list before his plan to stack turbos.

bburris
11-10-2004, 01:47 PM
I've ridden with him a few times, but that's been a while back. I thought that maybe in the last 4-5 months he may have figured it out.