PDA

View Full Version : 3 to 1 NP205 Gears



Doug Krebs
08-08-2002, 01:31 AM
3 to 1 NP205 Gears (http://coloradok5.com/forums/showflat.php?Cat=&Board=ord&Number=482394&page=0&view=collapsed&sb=5&o=&fpart=1)

StevenAg03
08-08-2002, 01:43 AM
whats the point in that....guess you should have baught a jeep....my dana 300 has a 2.72:1 low gear....http://offroadrepublic.com/fj40/pics-funnies/forum-thefinger.gifhttp://offroadrepublic.com/fj40/pics-funnies/forum-thefinger.gifhttp://offroadrepublic.com/fj40/pics-funnies/forum-thefinger.gifhttp://offroadrepublic.com/fj40/pics-funnies/forum-thefinger.gif

Rex
08-08-2002, 11:11 AM
Ok, lets do the math here:

Jeep CJ-5

T-150 2.99:1 first gear x dana 300 2.72:1 = 8.13:1

Chevy Blazer

SM 465 6.5:1 first gear x np205 1.99:1 = 12.9:1!!

There were no Jeeps that came with a granny gear transmission and a dana 300. The t-18's always had a dana 20 behind them which has a 2:1 low range!!! :D

mark
08-08-2002, 12:37 PM
Actually, both of those combinations suck in terms of low gearing.

Just pointing out the obvious.

BTW: My jeep was the king of poor stock gearing:

3.82 (1st) * 2.61 (D300 low) * 2.72 (gears) = suck

But its nothing a Klune won't fix.

-Mark

Krawler68
08-08-2002, 01:34 PM
Stock Early bronco gearing:

3.03 (1st gear) x 2.67 (low range) x 3.50 (axle gears) = 28.035:1

:eek: :eek: ouch

Modified EB crawl ratio:

6.69 (1st gear) x 2.67 (Low range) x 5.39 (axle gears) = 96.28... not that's a better start... nothing a Klune V can't fix :flipoff2:


As far as Krebs ratio goes... he has a 700r4 and it's a bad mofo in gearing... my E4OD isn't too shabby either...as autos go...

robertf03
08-09-2002, 05:04 PM
I got ya beat mark, 3:1 (t150) 2:1 (dana 20) 3.55 stock gears

21:1 crawl ratio.

davido
08-19-2002, 04:41 PM
What would that cost? $1400 with the doubler?

davido
08-19-2002, 04:43 PM
New post a' la Nix style....

SM 465 6.5:1
NP205 1.99:1
Axle Gears 4.10:1

53 and some change:1 x KLUNE = A LOT:1

:D ~dso

Rex
08-19-2002, 05:34 PM
How bout my stock mog.

14.9 first
No t-case
7.56 axle

112.6:1 final

Now add a crawler box that was a factory option with a 45.9 reduction.

347:1!! :D