PDA

View Full Version : cleanimg out garage and house



Broncocustom
08-22-2002, 11:34 AM
All this stuff is for sale. I do not have any prices yet, so just make me an offer if you want anything.

'78-'79 Bronco hood and front inner and outer fenders. All in good condition. Will also work for '70's era ford trucks. They are brown and white.

4 speed transmission (not sure if it is a T18 or T19) mounted to a NP205 transfer case.

Ford 9” housing, Gusseted with no spring perches, 31 spline axle shafts and third member without gears (might have some 3.50 gears lying around if needed)

Dana 44 front axle out of ’78 Bronco, I have 4.54 and 3.50 gears for this axle.

Front Dana 44 warn chromemoly axle shafts new still in the box. Will fit 78-79 bronco and 70’s ˝ ton fords.

2 sets of radius arms that came of the bronco.

A couch and matching wooden chair.
Table and four chairs
Entertainment center that will hold 27” TV
TV stand that will hold 32” TV and DVD and VCR (This is the one that was in the Dexter house that had the two 32” TV’s on it, well built)
L-shaped computer desk.
2 end tables

Finally my BAR that was in the Dexter house. A one of a kind with over 1100 beer bottle caps covering the top of the bar.

Cajun
08-22-2002, 12:31 PM
How much do you want for the bar?

JB
08-22-2002, 12:32 PM
I am interested in the front D44. How about $150 for it with the gears.

I don't know what the Warn shafts are worth, so let me know.

Thanks

BigRedFord04
08-22-2002, 01:11 PM
also interested in axleshafts...not b.c. i have the $$ or anything, just curious what you're askin'

Broncocustom
08-25-2002, 06:49 PM
As soon as I posted this stuff Troy sent me an email saying that he wants the bar, so if he does not end up wanting it I will post a price. I want $400 for the Warn shafts. They are worth around $550. I sold a second set just like these for $420 earlier this year to a guy in Nashville who drove down to pick them up. The 4.56 gear for the D44 are worth more then $150. Several people have said to sell it for $400.

Jackasic
08-25-2002, 07:23 PM
Originally posted by Broncocustom
The 4.56 gear for the D44 are worth more then $150. Several people have said to sell it for $400.

Are they Berillium? :rolleyes: I am pretty sure one could pick up new 44 gears for 150 to 175. Austin, how much were you 4.88 from Randys?

Cajun
08-25-2002, 08:28 PM
Originally posted by Jackasic


Are they Berillium? :

Nah, probably sphincterloy.:D

Broncocustom
08-25-2002, 09:26 PM
Sorry I was wrong about the price. They are $136 at 4 wheel parts. The only trips they have on them is the Moab trip in 2000, and a day trip to San Antonio. $150 for the whole axle is just alittle low. $400 for the front axle was just a suggestion from a couple of family members this weekend. It is a high pinion front 44. I am open to other offers. I will keep it for future projects if I can not get a decent price for it.

BigRedFord04
08-29-2002, 05:28 PM
i did some business w/ a junkyard this summer and was told that he would sell me a complete 44 for $100. A couple other places told me $250-300 for a full one.

bigFAWKINranger
08-29-2002, 05:53 PM
Originally posted by BigRedFord04
i did some business w/ a junkyard this summer and was told that he would sell me a complete 44 for $100. A couple other places told me $250-300 for a full one.

i think $200 would be a good price james. i was kinda wondering what to ask for the axles i am tryin to sell. i am just gonna ask the junkyard if they'll trade me a complete 9" in exchange for an exploder 8.8.... i also have a d44 for a narrow track and am gonna ask $200.... you could always ebay that crap and make a killin too.

redcagepatrol
08-29-2002, 09:49 PM
Originally posted by BigRedFord04
i did some business w/ a junkyard this summer and was told that he would sell me a complete 44 for $100. A couple other places told me $250-300 for a full one.

If you could get a front D44 for $100, buy it, you WILL make money.

A High Pinion D44 with new gears, cleaned up, seals, bearings, hubs all inspected and cleaned should not go for less than $350

JB
09-03-2002, 11:30 PM
All I want is a fullwidth D44 drivers drop w/ 5 on 5.5. I can do the seals and shafts and brakes etc later. Is this D44 all cleaned up and ready to go? What gears are currently in it? I have seen for a few d44 for sale out of 78-79 Fords in junkyards for $150-$175 in Texas. These of course are straight out of the trucks and have not been "rebuilt" and do not have 4.56 gears. What would you sell the axle for w/o the gears?

Sorry for the insulting low bid, I am just not clear on what I would be getting.

Thanks

Broncocustom
09-08-2002, 10:22 AM
here is the story of the Dana 44. In Septemper of 1999 I replaced all the seals and bearings in the axle plus new rotors and brake pads. In Jan. 2000 I installed a new carrier with a ez-locker and 4.56 gears with all new bearings on the gears. In April I broke the drivers side axle shafts and decided to change to a dana 60. The axle went on a trip to S.A. in September, Moab trip in March of 2000, S.A. trip in April, and Clayton in May. The bearings and seals Has at most 4000 miles on them and most of that is from flat towing the bronco to Moab. The gears have only a few miles on them since they only turn we you are in four wheel drive. I would guess the gears have at most 100 miles on them. I sold the ezlocker but still have the spider gears that I can reinstall.

bigFAWKINranger
04-17-2003, 03:10 PM
still got the 44? if so... would you take $300... when this insurance check comes in, i wanna buy new axles after i pay off my bills and fix my damage.

bburris
04-17-2003, 08:43 PM
Originally posted by Broncocustom
4 speed transmission (not sure if it is a T18 or T19) mounted to a NP205 transfer case.


How much are you looking to get for this. I assume it's a Ford tranny and driver's drop t-case...

I'm very interested if I can get it all for a good price. :D

bburris
04-20-2003, 09:41 PM
paging James...:D

Broncocustom
04-21-2003, 07:40 PM
The t-18 and np205 are froma '79 ford bronco, drivers side drop. The tranny needs a new bearing retain sleeve which I found several places on the web that sell them for less then $30. Make me an offer on the pair.

As far as the d44 I need to put it back together. I do not know if I have the spider gears anymore. I had a locker in it but I sold that before I left C.S.

2 people have expressed interest in the d44. How soon would anyone need it and actually be able to pay for it in full. I have tried the payment plan and that does not always work. (Troy where is my $50 for the third member??) The axle has 4.56 gears init with few miles on them. I will most likely take $300 for the axle but I will let you know later this week my final price.

bigFAWKINranger
04-22-2003, 05:04 PM
Originally posted by Broncocustom
The t-18 and np205 are froma '79 ford bronco, drivers side drop. The tranny needs a new bearing retain sleeve which I found several places on the web that sell them for less then $30. Make me an offer on the pair.

As far as the d44 I need to put it back together. I do not know if I have the spider gears anymore. I had a locker in it but I sold that before I left C.S.

2 people have expressed interest in the d44. How soon would anyone need it and actually be able to pay for it in full. I have tried the payment plan and that does not always work. (Troy where is my $50 for the third member??) The axle has 4.56 gears init with few miles on them. I will most likely take $300 for the axle but I will let you know later this week my final price.
well i know seth wants it too, and i told him to get it if he could, BC i am mailing the check to ford tonight to be signed and returned to me... which means i'll have the $$ inside a week... better hurry seth... BWAHahahahahahahahahahahahahha:flipoff2: :flipoff2:

Broncocustom
04-22-2003, 07:14 PM
Steve wants it also. $300 sounds good. I have to get all the parts together when I get back in town. I will also include a pair of radius arms with the frame mounts. I do not think I have any coil springs laying around but I might be wrong.

BigRedFord04
04-22-2003, 08:44 PM
nix if you need 'em foley has my old coils...you should prolly try to find some taller ones though

bigFAWKINranger
04-22-2003, 08:46 PM
well hawt damn! didn't know i was gettin radius arms n all... screw steve... :flipoff2: he ain't never done nuthin fer nobody no how.... :D

bigFAWKINranger
04-22-2003, 08:49 PM
Originally posted by BigRedFord04
nix if you need 'em foley has my old coils...you should prolly try to find some taller ones though
i was thinkin wild horses 5.5"???

bburris
04-23-2003, 07:33 PM
Originally posted by Broncocustom
The t-18 and np205 are froma '79 ford bronco, drivers side drop. The tranny needs a new bearing retain sleeve which I found several places on the web that sell them for less then $30. Make me an offer on the pair.


James - would you take $125 for the tranny and tcase? And, if so, can you also tell me where to get that part for $30...?

bburris
04-30-2003, 06:10 PM
:confused:

Broncocustom
05-01-2003, 07:43 AM
I would like to get more for the tranny/t-case combo. I was think something like $125 for each. Or something around that. I will hang on to them for now if all I can get is $125.

bburris
05-07-2003, 10:13 PM
ok, well I was just going off what some guy was asking on POR - he wanted $150 for an NP435/NP205 combo a few weeks ago

would you take $200?

StevenAg03
05-07-2003, 10:28 PM
brakkkkkk....dont be a jue.....give the man what he wants....:flipoff2: :flipoff2:

bburris
05-08-2003, 04:23 AM
hey, I'm poor and I think that's a fair price...

and it's spelled J-O-O fool

Broncocustom
05-14-2003, 04:57 PM
I will take $200. Where are you living right know? When would you be able to pay for it?

Seth
05-14-2003, 06:26 PM
Originally posted by Broncocustom
When would you be able to pay for it?

that's classic, he knows that its not now ***

on a side note, i still will buy your axle, my first pay check is on the 23rd. I would prob be able to pay in full on the 30th (2nd check) If you want I can send you a deposit, and pay for it in full, as i cant actually be in houston or CS for a while. storage?/

Shaggy
05-14-2003, 06:33 PM
Originally posted by Seth
storage?/

i thought he was cleaning out his garage... not just changing ownership of given idems:flipoff2:

redcagepatrol
05-15-2003, 07:55 AM
He NEEDS to clean out that gargage - you can hardly walk thru the place he's got so much crap:flipoff2: :flipoff2:

Cajun
05-15-2003, 08:52 AM
I also still want the axles from the fullsize Bronco...:flipoff2:

Broncocustom
05-16-2003, 12:34 PM
The axle will be togeather tonight. Steve said he had the money so he gets first dips onit.

Here is what I have found while starting to rebuild the axle. I found the 4 gears and cross pin for the spider gears but I am missing one spacer. The axle will be rebuilt without the axle shafts. Since there are no spider gears the shafts would be resting againt the inner seals and mess them up. When I deliver the axle I will bring the spider gears, carrier and axle shafts not installed. I found the stock steering and radius arms, but did not find the track bar or the spring cups. I also found the new brake pads along with the pads that look brand new that are installed currently. If the buyer wants they can have the 3.50 gears I have for this axle.

Steve, if you still want it I will be going to College Station on Saturday to bring some stuff to Matt and Margo.

Brett do you still want the tranny and t-case?

bburris
05-16-2003, 04:00 PM
yes I want them, but I have to scrape up some money...

Broncocustom
05-16-2003, 04:45 PM
No problem. They are not going anywhere. What kind of time table are you looking at? Just wondering so I can plan on when I can spend your money.

bburris
05-16-2003, 05:15 PM
June-ish...gimme about a month

Broncocustom
05-18-2003, 07:45 PM
Seth the axle is yours if you want it. The axle is in the back of my truck and I need to get it out by next weekend so I can haul some dirt. Seth you can have the axle this week and pay me when you get paid. I really do not want to unload it back in the garage and then have to put it back in the truck latter.

Seth
05-18-2003, 08:55 PM
Gimme a cell number and i will get in touch to arrange a drop off spot - i am in dallas, but still have my garage in CS.

Broncocustom
05-19-2003, 07:49 AM
my cell is 713-254-5279

Broncocustom
06-04-2003, 08:57 PM
Does anyone want to buy the front dana 44? Last month everyone wanted it and now nobody seems to want it.

Seth
06-04-2003, 09:17 PM
I still want your 44 - let me rephrase - i will buy it, not just want it. I will PM you.
Seth

JB
06-17-2003, 05:37 PM
Seth, did you buy the D44? Is it still for sale?

Seth
06-17-2003, 05:39 PM
Yeah - its mine.

Cajun
06-17-2003, 10:11 PM
I still want your 60/70...It's not doing anyone any good sitting out in that field and they'd look sweet under the Scout :D

Broncocustom
06-20-2003, 07:10 PM
Make me a good enough offer and the 60 an 70 are yours. Anything is for sale for the right price.

Broncocustom
07-14-2003, 07:22 AM
The axle is now gone, Thanks Seth for buying it.

Does anyone want to buy the np205 and t18. I know Brett wanted at one time but since I have not heard from him in along time I guess he found something else to use. I also have some reverse rotation D60 4.10 gears on an open carrier if anyone wants to buy them.

spool
07-14-2003, 08:01 AM
How much for the gears and carrier?

Broncocustom
07-14-2003, 10:06 AM
Make me an offer. The carrier is for 35 spline axle shafts. These are the gears that came out of my front D60.

Cajun
07-14-2003, 11:34 AM
Originally posted by Broncocustom
Make me a good enough offer and the 60 an 70 are yours. Anything is for sale for the right price.

What are the specs on them again? Gears, lockers, rebuit, hubs, etc...? Are the tires for sale as well...42x16.5x15, right? Any chance of a package deal?

Also, I've got a '79 RC HP Ford 60 and a 14 bolt rear if you'd be interested in a partial trade...4.10s in both.

Broncocustom
07-14-2003, 12:07 PM
The tires are gone, Cody is running them on his truck.

The rear axle is a D70 from a '85 F-250. Full floating 35 spline axle shafts, Drum Brakes, new 5.13 gears, Powrlok (this is a posi that is real tight and was in the axle when I bought it). New brake shoes, seals, brake lines, and all bearings.

The front axle is a RR D60 from a '88 F-350. The axle shafts are 35 spline inners and 30 spline outers. New u-joints, all bearings, all seals, rotors, one brake caliber, brake lines and brake pads. The steering is made using 1" sch 160 pipe with 3/4" heim joints. 5.13 gears and a full Detroit locker.

All the work was done to both axles the summer of 2000. The truck was driven around town a little and trailered to Lano river, San Antonio and Mason. So the parts have very little wear. The gears and locker were not cheap.

If I do part out that truck I will also have another np205 for sale that is connected to a c6 that was rebuilt in 1999 with a b&m shift kit. The tranny does not have that many miles on it either.

Cajun
07-14-2003, 01:01 PM
Is the 60 a kingpin axle?

Broncocustom
07-14-2003, 01:06 PM
yes it is a king pin axle. The axle tubes are also some of the thickest tubes made for the front d60. Also I forgot that the rear brake cylinders were also new along with the brake hardware.

Cajun
07-14-2003, 09:05 PM
$2000 for the pair. If that's cool, are you interested in my 60 or 14 bolt?

Seth
07-15-2003, 01:06 PM
Hey James - I forgot to tell you - I might buy those whiz bang axle shafts......eventually. How much are you asking for them and how much are they new? Thanks again.

BigRedFord04
07-15-2003, 09:08 PM
Originally posted by Broncocustom
I want $400 for the Warn shafts. They are worth around $550. I sold a second set just like these for $420 earlier this year to a guy in Nashville who drove down to pick them up.
seth, you lazyass...it was on the 1st page. :flipoff2:

Seth
07-16-2003, 08:27 AM
i just want to know why they werent included in the original package deal :D

Seth
07-17-2003, 02:28 PM
now eight - dont go ****in up my package deal im gonna buy - it must be soemthing rigged anyway right

Broncocustom
07-17-2003, 07:42 PM
Sorry I have not got back sooner but the dial-up at the hotel sucks this week.

Seth I sold the Warn shafts last year but forgot to note it on here.

Andy, I need to think about it. I really do not want to sell them just in case I want to build something down the road but your offer is good and might make me change my mind. I also need to discuss it with Amie.

Lynda
07-23-2003, 10:02 AM
ANDY, James couldn't get to a computer so he asked me to tell you that he'll take your deal on the Axles. Amie is in the Hospital and he needs the money.

fbronco86
07-23-2003, 08:04 PM
hey james if you get this i want the t18 205 combo we talked about this. thanks mike

Broncocustom
07-23-2003, 11:45 PM
Andy the axles are yours. Call me to figure out when and how to get them. Cody told me this last weekend that he does not plan on using the 42" tires anymore and was thinking about selling them, so if you are interested let me know.

Mike the tranny and tcase are yours. Call me to talk about it.

Here is other stuff I need to sell:
-5 - 16.5"x9.75" white wagon wheels that are 8 lug
-C6 rebuilt a couple a years ago but has at most 3000 miles on it.
-np-205 that is currently mated to the c6
-2 -5 point simpson race harness'
-Holley electric fuel pump but I do not remember what it is exactly
-4.10 RR d60 gears used
-Stock d60 35 spline carrier

Make offers on stuff. If you have anyquestion call my cell 713-254-5279

fbronco86
07-23-2003, 11:49 PM
Is the output for the tcase on the drivers side?

BigRedFord04
07-24-2003, 03:08 AM
is there a carrier split in the D60? if so, which ratios is yours good for? i might be needing one soon for a rear 60.

Doug Krebs
07-24-2003, 08:36 AM
how much you want for the wagon wheels and the harnesses?

Broncocustom
07-24-2003, 11:28 AM
T-case has drivers side output.
I had not thought about prices since I wwas not planning on selling this stuff. I think the wheels were $50 each new.
I think this carrier only goes up to 4.10 gears. I think for 4.56 gears you need a different carrier but I do not know for sure.
The harness's were $100 each. Make an offer.

fbronco86
07-25-2003, 11:33 AM
alright then it should work for me. I will give you a call.

Broncocustom
07-30-2003, 12:10 PM
Here are a couple things I have placed on ebay. I will be adding more in the next few days.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33728&item=2425945106

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33749&item=2425944071

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33728&item=2425945720

chevsu
07-30-2003, 03:09 PM
do you still have any elec. fans on the bronco?

Broncocustom
07-30-2003, 03:23 PM
Here is the stuff I want to sell:
2- ford power steering boxes
2- Tom woods cv drive shafts (I will find out the length this weekend) each driveshaft cost $400 new
2- stock bronco cv driveshafts
-c6/np205
-t18/np205 (might already been sold)
- 5 white spoke 16.5"x9.75" 8 lug wagon wheels from 4wp
2- simpson 5 point harness's
-Holly red top electric fuel pump
-canister style performance fuel filter
-york a/c compressor
-pressure regultator/ pressure relief/ filter from on board air system
-400 ford engine - whole or any needed parts
- brand new set of auto meter classics gauges, still in box. bought for bronco but never used, cost $300 new
- the lugnut set on ebay
- d60 4.10 gears on ebay
-d60 carrier on ebay
2 - ford 9" open carriers for 31 spline axles also have most the parts to build 2 ford 9" axles
3- electric fans from the bronco

Make me offers on this stuff. I plan on taking apart the bronco this weekend and start taking pictures of parts so that I can post them on ebay.

chevsu
07-30-2003, 03:37 PM
what size cv is on the driveshaft? i could be very interested in those and the fans and maybe the york. i will take a look at it after work and see what i could use.

Broncocustom
07-30-2003, 03:44 PM
The cv's are only 1330's. I did not want to change the yokes on the t-case when I was building the truck. when you go look at the fans there are 2 on the radiator and 1 on the fuel cell housing in the back.

aggielr
07-30-2003, 03:54 PM
how much ya lookin to get for them 9", and what is the wms-wms?

chevsu
07-30-2003, 06:01 PM
i am interested in the driveshafts and one fan. but i'm not totally for sure i can use them yet but i would like to try.

Broncocustom
07-31-2003, 10:23 AM
The 5 point harness' are now sold.

I have placed a few more items on ebay.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33732&item=2426077045
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33691&item=2426093614
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33593&item=2426095279

Broncocustom
08-01-2003, 08:39 AM
Mike do you still want that t18/np205? I can bring it to anderson this weekend if you want.

fbronco86
08-01-2003, 07:15 PM
yes i still want it. i have been a little busy with school and crap. But anyway i am in houston this weekend. you can call me at 281-352-4653