Yankee Whiskey AKA: USS Get Drunk and Wakeboard AKA: King Ding A Ling of Lake Bryan

[Fredo]

Here's a pic of us using the patented BMF Skyhook o' Death getting ready to put the engine and trans in. The other one was the stopping point for the night. Other than waiting on some parts to come in, things seem to be going relatively smooth. Still lots to do after it's running like the interior and the stereo.

[JeepPhisherman]

Sweet!

[tigweld]

Did you guys test the hatch to see if it clears the intake?

[BMFScout]

Did you guys test the hatch to see if it clears the intake?

Negative ghostrider. Going to have to make a lip for the cover to sit on. I think it should clear with a 2" boost.

[agjohn02]

they look cooler with the engine sticking out

[uglyota]

Nice, I think you should make a new cover out of lexan and paint "lamborghini" on the valve covers

[DRAGOONRANCH]

they look cooler with the engine sticking out

I bet that would even get my fat ass outa the water. ;)

[agjohn02]

I bet that would even get my fat ass outa the water. ;)

...

[tigweld]

they look cooler with the engine sticking out

I like this one better
http://www.theturboforums.com/smf/index.php?topic=104158.0

[Fredo]

I think you have to be logged in for the photo st.john is talking about to show up, so I'll post it here. I thought for sure it was a photochop at first, but apparently it isn't. Nuts!

[agjohn02]

wow! how many cubes?

[Graystroke]

that's sweet. those are some serious water fowl catchers!

(and yes you have to be logged on...I looked through that thread for 20 minutes trying to find a pic of something resembling a boat w/ big turbos...that pic is better than I imagined)

[mudtoy67]

That boat is pretty awesome. Saw it a couple years ago at the marble falls boat races. Definitely sweet turbo action.

It had a bi run that day, so didn't get to see it go hth with one of the blown nitro boats...it did haul ass though.

[DRAGOONRANCH]

That boat is pretty awesome. Saw it a couple years ago at the marble falls boat races. Definitely sweet turbo action.

It had a bi run that day, so didn't get to see it go hth with one of the blown nitro boats...it did haul ass though.

If I transplanted an engine like that into the beast, what kind of axles would it take to hold up to it??? Sharpe, screw your puny little 8.1...:flipoff2:

[tigweld]

wow! how many cubes?

I bet either pretty big or that thing spins sky high because those are big chief symmetrical port pro stock style heads

[Graystroke]

don't know if this is a good deal or not so I posted it here.
will this work jimmy?
http://dallas.craigslist.org/boa/631809743.html

[RCcola55]

jimmy, did flem deliver the goods?

[uglyota]

2 6 1/2s? That can't possibly be enough!

[DRAGOONRANCH]

Does it look to anyone else that he used promotional pictures for that stuff???

[Fredo]

I don't know. Looks like they might just be ****ty resized and cropped pics that he took. Seems like an decent deal but I don't know. Jimmy is the one pricing the tower, not me. I did however get some work done after coming home from ADC. Brett came over and helped and we've got everything hooked up except for the exhaust, the return fuel line, gas tank, I have to replace a breaker that is bad, fill the transmission, and hook up the battery and it should be ready for a test fire. Hopefully that happens tomorrow night. Oh, and before anyone says anything, yes, one of the plug wires is blue. There was a damaged one and Jimmy didn't want to buy an entire set, so we just took one out of the miscellaneous auto parts box we have and put it on. Oh, and Brett slapped the engine cover on to take a pic. I guess he wanted to see how it looked.

http://i186.photobucket.com/albums/x283/fredo_92/proboss1.jpg

[CheapJeep]

Went with a Taylor tower on our boat, really nice product with an easy/straight forward install. They're located in New Mexico and really knowledgeable, check em' out.

Before
http://img.photobucket.com/albums/v404/blink05/JeepBuildup019.jpg

After
http://img.photobucket.com/albums/v404/blink05/JeepBuildup036-1.jpg
http://img.photobucket.com/albums/v404/blink05/JeepBuildup038-1.jpg

[DRAGOONRANCH]

Dead Bald Male Hooker head???


I fixed the engine cover while I was at it. :blackwink:

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Stupid/proboss1-deadmalehooker.jpg

[Fredo]

Propane....riiiiiiight. Where are you getting this bald idea? That's me laying sideways trying to tighten the clamps on the water intake hose.

[DRAGOONRANCH]

BWAHAHAHAHAH,

I finally realized how you were layin in the picture. I thought it was two different people for some strange reason...

[Seth]

Kick ass.

[Fredo]

Got the rest of the engine buttoned up, fuel system hooked up and 5 gallons of gas in the tank. All the relays click, engine cranks, has spark, but the low pressure pump, that supplies the High pressure pump in the Fuel Control Cell, is no bueno por caca. Damn thing wanted to run but it wasn't to be tonight.

[BMFScout]

boooo....that sounds like $$$

[Fredo]

Anybody recognize this pump as a factory part for any car? It says carter on it, but they wisely made the image small enough not to be able to get a part number off of it.

[BMFScout]

how much is it?

[BMFScout]

That guy advertises his tower business on craigslist all the time. I had checked out the Taylor towers, looks pretty good.

[Fredo]

It's a $119 pump on marine sites. Skidim.com has one in their clearance section that they had on a motor for a couple hours that they are selling for $80 that still is under warranty. By the way, what the hell are you doing up still? Isn't it 2am where you're at?

[BMFScout]

I was watching the big 12 take the championship at the bar. Time for bed.

[Fredo]

Figured it out. The high side pump flows 55gph at approximately 45psi, and the low pressure supply pump is approximately 5psi and 72gph. Turns out it's a universal marine Carter pump p/n P4070 avaliable at the Napa less than a block from the office for $90. Picked one up at lunch. Thanks for the help guys!

[jerryg79]

Picked one up at lunch. Thanks for the help guys!

I do what i can!

[Fredo]

Thanks Jerry...don't know what I'd do without ya! :flipoff2:

[BMFScout]

I think we have the wrong Idle air controller, but the damn thing runs.

Fred, logged in as Jimmy.
http://i186.photobucket.com/albums/x283/fredo_92/th_itsalive.jpg (http://s186.photobucket.com/albums/x283/fredo_92/?action=view&current=itsalive.flv)

[Reckless]

bad ass

[jerryg79]

I think we have the wrong Idle air controller, but the damn thing runs.

Fred, logged in as Jimmy.
http://i186.photobucket.com/albums/x283/fredo_92/th_itsalive.jpg (http://s186.photobucket.com/albums/x283/fredo_92/?action=view&current=itsalive.flv)

NICE!!!!!!!!!!

[DRAGOONRANCH]

Now just rig a remote start switch for when someone is tailgating you. :D

[agjohn02]

sounds pretty cool. too bad it'll be underwater. needs some zoomies!

[BMFScout]

sounds pretty cool. too bad it'll be underwater. needs some zoomies!

Only at idle, it'll be nice and loud cruising out across the lake. Now onto the interior and other things that cost money! :gigem:

[agjohn02]

ah, yeah. didnt think about that. cool.

[Seth]

hell yeah! I think what I like most about it is the brunes owning a fomoco.

[Fredo]

It's the only decent small block v8 architecture ford has ever had. Also, this one is put together with all the factory parts that ford guys beat it to, and it's fuel injected, so I can live with it. I would not have the same outlook on the low output carbed pile of poo that was in the boat when jimmy got it.

[Seth]

it is a 351, which series? cleveland?

[BMFScout]

Windsor.

Also, I forgot to thank Clarke for the MAP sensor. It's sensing some manifold pressure like a mofo! I declined the other stuff, so make sure you get it back from Flem. Thanks, I owe you a beer/pull behind the boat!

[Fredo]

Actually, I'm pretty sure Karl snagged the coil and intake spacer. So talk to him if you want those back.

[BMFScout]

Had to order some new fiberglass mufflers for Irene. The ones in it were all broken up inside and leaking into the boat. I had thought about throwing a couple stainless pipes in there and calling it good, but thought I shouldn't halfass anything at this point. Fred probably would have got it on the water this weekend if not for the mufflers. The prop is back from the prop shop, looks brand new.

[Fredo]

http://dallas.craigslist.org/boa/650412099.html

Seems like a decent deal. Think it would fit Jimmy? If we wanted to repowdercoat it a different color, turns out we work about 2 minutes from a powdercoating shop.

[JB]

Im bored and in waxahachie if youwant me to look at it.

[RCcola55]

as well are my rents

[Fredo]

I thought they were in the Chill?

[Graystroke]

here is another source if you need a custom one. they are in Denison, TX.
http://www.nauticalstuff.com/

[BMFScout]

http://dallas.craigslist.org/boa/650412099.html

Seems like a decent deal. Think it would fit Jimmy? If we wanted to repowdercoat it a different color, turns out we work about 2 minutes from a powdercoating shop.

sold, shouldn't be too far from work go pick it up!!

[Fredo]

you sure it will fit?

[KrazyKarl02]

you sure it will fit?

I won't have you ruin this thread with logic and good judgement....

[RCcola55]

I thought they were in the Chill?

im form the chill, they reside on the border of midlo and waxasnachie now

[tigweld]

you sure it will fit?

you can make it fit you guys are pro's now at all this boat riggin' shiat

[Fredo]

true. I guess I'll call him and see if I need to make a trip to waxasnachie.

[agjohn02]

any links to good places to get marine bazooka tubes?

[JeepPhisherman]

crutchfield or overtons

[agjohn02]

whoa, not cheap

[BMFScout]

Dropped some bux on interior material. (It's cheap!) St.John laid down some super sick seams last night. Planning on working on it again tonight. Interior is going to be mostly white with some maroon and blue. Running blue stitching on the white boat vinyl, looks pretty cool. Bought a Pylon extension made specifically for a Centurion on Craigslist, Grayson's got it at his house. Still haven't taken it on a test run, maybe this weekend.

[BMFScout]

Homemade Wedge...thoughts? Looks easy enough to me!

http://forums.wakeboarder.com/viewtopic.php?t=423&highlight=&sid=14c56b4c561da8b59219bd4fe1fad6aa

[eight]

Do it. Seems their thoughts on it are the same as mine. Its not that much force. Maybe I take a look at how the one on the malibu is mounted. You could also brace from the backing plates to the engine mounting area if you wanted a little extra.

[eight]

Put a pair of 1500 gph bilges in it just in case you manage to rip it off. Some malibus have sunk because their little bilge couldn't keep up.

[DRAGOONRANCH]

Homemade Wedge...thoughts? Looks easy enough to me!

http://forums.wakeboarder.com/viewtopic.php?t=423&highlight=&sid=14c56b4c561da8b59219bd4fe1fad6aa

Could you make it adjustable for field trials and then weld it up once you got it where you wanted it?

[Graystroke]

do it and add power trim to it so you can control it. There is a boat wrecking yard in fort worth w/ tons of I/O's you could scavenge from

[BMFScout]

test run was successful. the four man crew of fred, ryan, flem and me braved lavon today. mom and dad ran the shore crew. ran like a striped ass ape and sits LOW in the water. had a prop shaft seal leak, but I think they all do. pics later when I get back to the house. Great success!!

[BMFScout]

Here's some pics

[BMFScout]

Here's the video, nothing exciting.




http://i67.photobucket.com/albums/h311/bmfscout/th_boat008.jpg (http://s67.photobucket.com/albums/h311/bmfscout/?action=view&current=boat008.flv)

[bburris]

OK, now I see how the motor can sit level in the water...

[Seth]

Badass! Work those kinks out, I will be in town next weekend! I like how St john is the only one wearing a life jacket, smart guy.

[Graystroke]

isn't the stuffing box something like a rope saturated in grease and then wrapped around the prop shaft?
looks like a mean *****...I think flem looked skeered.
when you mean low are you a little scared about adding more balast?

[KrazyKarl02]

Bad Arse, bring it down to Don Johnson's now!

[BMFScout]

isn't the stuffing box something like a rope saturated in grease and then wrapped around the prop shaft?
looks like a mean *****...I think flem looked skeered.
when you mean low are you a little scared about adding more balast?

Not sure about the seal, doesn't leak that bad and I have a bilge pump. I'll get to it eventually.

Not worried about the ballast, just feels like you are close to the water when you're in it. Not a very good rough water boat.

[J Cooper]

that boat looks much smaller in the water with people on it.
still a bad dood, sounds good

[DRAGOONRANCH]

Badass! Work those kinks out, I will be in town next weekend! I like how St john is the only one wearing a life jacket, smart guy.

Probably because he is the only one that remembers his 'driving' (http://youtube.com/watch?v=m5YqiLR69JA) skills. :flipoff2:

I hope that is the right video, it not don't bust my balls, utube=no-no at work....

[Fredo]

Jimmy actually drove on the test run. I slipped into the driver's seat for putting it back on the trailer and that's when the pics were taken.

[jerryg79]

that boat looks much smaller in the water with people on it.
still a bad dood, sounds good

i was thinking the same thing. Looks like it hauls ass though!

[BMFScout]

The spaciousness of a 19' boat goes away real quick when you put a bigass motor and transmission right in the middle of it. It's going to be a pain in the ass to take more than 4 out, but I knew that. I'd still rather have this than an inboard/outboard in the same price range. Inboards are way cooler.

[Doug Krebs]

The spaciousness of a 19' boat goes away real quick when you put a bigass motor and transmission right in the middle of it. It's going to be a pain in the ass to take more than 4 out, but I knew that. I'd still rather have this than an inboard/outboard in the same price range. Inboards are way cooler.

now to get someone to go all the way around the boat on waterski's, wakeboard, whatever:gigem:

Sounds bad ass even with these little speakers.

[Fredo]

yeah, we need to get a full throttle video, but the half or whatever amount of throttle that was used, it was all I could do to hold on with one arm to keep from sliding back on the bare floor into the engine while filming.. It'll be a lot more fun to try a WOT launch with an engine cover and seats.

[Doug Krebs]

yeah, we need to get a full throttle video, but the half or whatever amount of throttle that was used, it was all I could do to hold on with one arm to keep from sliding back on the bare floor into the engine while filming.. It'll be a lot more fun to try a WOT launch with an engine cover and seats.

who needs seats? Now you need 15 scantily clad women doing the ski pyramid thing from the 80's!

[eight]

test run was successful. the four man crew of fred, ryan, flem and me braved lavon today. mom and dad ran the shore crew. ran like a striped ass ape and sits LOW in the water. had a prop shaft seal leak, but I think they all do. pics later when I get back to the house. Great success!!

Another advantage of the wedge vs. ballast. Doesn't weigh the boat down.

I know the malibu has a slight prop shaft leak. I think the tige had one too.

The closed bow will make the boat safer than it seems in rough water. You foam fill much?

[mark]

The spaciousness of a 19' boat goes away real quick when you put a bigass motor and transmission right in the middle of it. It's going to be a pain in the ass to take more than 4 out, but I knew that. I'd still rather have this than an inboard/outboard in the same price range. Inboards are way cooler.

You only want three people anyway. One driver, one observer and someone at the business end of the rope. Even with a tower, you really don't want people in the back blocking the view of the observer.

To solve the people carrying capacity, get an old pontoon boat and convert it into a party barge. Even a little 20hp motor would be good enough to put put out to the ski area with the entire Swedish Bikini team. Use the ski boat for boarding and beer runs.

-Mark

[mudtoy67]

You only want three people anyway. One driver, one observer and someone at the business end of the rope. Even with a tower, you really don't want people in the back blocking the view of the observer.

To solve the people carrying capacity, get an old pontoon boat and convert it into a party barge. Even a little 20hp motor would be good enough to put put out to the ski area with the entire Swedish Bikini team. Use the ski boat for boarding and beer runs.

-Mark


That, kids, is why they pay him the big bucks.:gigem:

[CheapJeep]

That's awesome Jimmy, I'm liking the boat. If you ever bring it down to CS or Conroe I'll have to come out and ride behind it.

Looks like it would throw a pretty good wake without ballast since it sits lower in the water plus the weight of the engine. The A&M Wakeboard Team/Club boat is an 81 Ski Nautique with a 351w and a few hundred pounds of ballast. It's a small boat but once you put a bunch of people in it you really don't need ballast or else the wake is ridiculously huge.

[BMFScout]

I's going to have ~300#'s integrated into the back seat of water/tank. I also have a couple fat sacks I can fill if there aren't as many people. I think it will do fine. I'm ready to rip it up behind it though.

[BMFScout]

We're headed to Mizzou for a week and the interior isn't quite done. In fact the only thing done is the driver's seat. (It's hella sick though) We whipped up an interior tonight so we have something to wakeboard behind and it is choice. house carpet, half of the old interior, etc. The pinnacle is going to be the engine cover covered in tarp material. Oh well, thanks to Grayson and then Flem the pylon extension made it in from Ft. Worth. I'll post pics later mostly of the work St. John did on the seat, it's badass. When the rest of it gets done it will def. be the nicest part of the boat.

[DRAGOONRANCH]

that's just great, and you are going to be sitting your fat ass on it so no one else will be able to enjoy it. :rolleyes:






kinda nice to be able to call someone else fatass and not have to worry as much about the 'look who's talking' line come zinging back. :blackbigsmile:

[BMFScout]

boat is running great (knock on wood) the water is colder than a witch's tit though. I've boarded a couple of times behind it, need to work on the wake some more though. we hung a 3X5 Texas flag from the extended pylon to let the missouri *****es know we mean business!

[robertf03]

kick ass

[tigweld]

best of both worlds?

http://cgi.ebay.com/ebaymotors/1999-Malibu-Corvette-Ski-Boat-Mint_W0QQcmdZViewItemQQcategoryZ63686QQihZ019QQite mZ290232941809QQrdZ1QQsspagenameZWDVW

[Doug Krebs]

best of both worlds?

http://cgi.ebay.com/ebaymotors/1999-Malibu-Corvette-Ski-Boat-Mint_W0QQcmdZViewItemQQcategoryZ63686QQihZ019QQite mZ290232941809QQrdZ1QQsspagenameZWDVW

wtf? They put a bazooka sub in a $63000 boat?

[jerryg79]

i remember when those came out, i read the article in some magazine and thought it was redneck awesome.

[BMFScout]

my 60 year old dad got up on a wakeboard today AFTER showing us he still knows his way around a slalom ski. then we got stopped by the boat patrol. both instances were a lot of fun. pics to follow. I called grayson earlier to tell him all about our adventures and he said to call him back after lost was over. time to go slay crappie!

[robertf03]

Its over now

[BMFScout]

fags

[8Runner]

Wow, just getting time to get caught up on some threads that I had to skip the last few months (years?). This thing looks awesome and has come a long way. Can't wait to see it in person.

[agjohn02]

fags

seems a bit hypocrytical coming from the man who changed his cellular provider so it wouldnt cost him so much to talk to grayson everyday.:flipoff2:

[BMFScout]

actually it was free before when I had sprint. I have at&t now so it uses my minutes when I talk to him now. so there!

[Graystroke]

is it free for At&T to At&t? If so, I will start using my work phone.

[mudtoy67]

yes

[BMFScout]

yes use the work phone to call and tell me how cheap hose clamps were at Northern. ;)

[BMFScout]

http://bierbower.net/diytower/pumpless/

Click here and then download the word file that says "pumpless ballast sys"

there is discussion by pothead wakeboarders on it here:

http://www.wakeworld.com/MB/Discus/messages/65921/199086.html?1105114843

I think this will work tip top, and plan on trying it on my rear tank, and if that works adding a tank in the nose. St.John isn't so sure about it. Discuss.

[agjohn02]

i would put a NACA duct on the bottom of the boat

[AggieTJ2007]

It seems like it should work, their server must be slow the file is taking a while to download.

[eight]

It's always gonna fill some when you're driving because the air will compress.

You can't just hook yourself up with some sample/obsolete solenoid valves from work? I'm thinking a Butech K108 with electric actuator would do the job. One per tank and just put it in the line from the scoop to each tank. It would work better this way.

[uglyota]

It's always gonna fill some when you're driving because the air will compress.

Isn't that what the ball valve is for?

[agjohn02]

Isn't that what the ball valve is for?

no, thats just for a leak. kopecki is talking about controlling the system with something similar. although i dont think your going to see much fluctuation in the system from dynamic pressure alone.

[AggieTJ2007]

seems like it would be hard to get the tank in the nose to fill well

[BMFScout]

if it fluctuates no biggie, If I'm not wakeboarding I'll close the valve underneath. No reason to bring electricity into it if I don't have to. KISS

[BMFScout]

forgot to brag that I stuck a toeside 360 sat night behind st.john's boat. never done one with a handle pass before, not that anyone really cares, but I was stoked.

[AggieTJ2007]

sweet

[eight]

So you really are decent at this thing. If you can do that, you're better than 80% of the kids with $60K boats. We need to get you and brother runt together. If you're getting decent at some things he can help you out with others. You got a cable lake around?

[BMFScout]

that would be badass. I need someone that knows what the hell they are doing to give me some pointers. that and to lose about 20 lbs so that I can go longer, and for my left knee to hold together.

[BMFScout]

The boat bumps like a hikeschool hatchback in the back of the parking lot. You know the one, your mom doesn't want you to hang out with the guy that drives it. Sublime sounded pretty good. Working on getting all the stuff for the ballast system together and for the interior guys to finish up. I bought a 16 gallon tank to stick in the nose, hopefully ~150 lbs. will help bring the nose down a little at wakeboard speed, wasn't room for much more. So that, plus the rear tank under the backseat makes ~ 450lbs of extra weight. E-searching says that isn't that much for those boats, but I'll start with that. It's getting close, maybe by the time summer is over! :)

[Reckless]

New name?

[DRAGOONRANCH]

:gigem:

[BMFScout]

Priorities. Guess which one I'm still making payments on. If you guessed the foreign one, you'd be right. The interior panels are finally finished and it's time for Ry to get to work on covering the rest. I'm betting he's super stoked since he's been getting so much done on Cheeromanche!

[BMFScout]

Ryan put carpet in the hooker this weekend. I can start installing some things permanently like the driver's seat, stereo, ballast tanks, etc. Althought the side panels and a few interior panels aren't done because I need to buy some more material, it'll pretty much be ready to wakeboard behind. Fred's got pics, post them up sucker!

[Fredo]

I'm a little slow at getting these loaded up.

Here's the pictures of the carpet:

http://i186.photobucket.com/albums/x283/fredo_92/irene/carpet1.jpg

http://i186.photobucket.com/albums/x283/fredo_92/irene/carpet2.jpg

http://i186.photobucket.com/albums/x283/fredo_92/irene/carpet3.jpg

[Fredo]

So after that, we got the boat back to Murphy and started the permanent install of the ballast system, stereo, driver's seat, etc. and decided to repaint the rubrail since the paint was flaking off of it. Makes the outside look much better.

http://i186.photobucket.com/albums/x283/fredo_92/irene/rubrail.jpg

http://i186.photobucket.com/albums/x283/fredo_92/irene/rubrail2.jpg

[Fredo]

Here's a shot of the engine cover bolted in for good, and the driver's seat. Also, the twin batteries and switch, sub box, and you can see the back of the front ballast tank as well in one of the shots.

http://i186.photobucket.com/albums/x283/fredo_92/irene/interior1.jpg

http://i186.photobucket.com/albums/x283/fredo_92/irene/interior2.jpg

http://i186.photobucket.com/albums/x283/fredo_92/irene/interior3.jpg

[Fredo]

and finally, a shot when we got off the lake tonight. Apparently everyone else called it a weekend and went home. We had great water and only one other wakeboarding boat anywhere near us. It was nice.

http://i186.photobucket.com/albums/x283/fredo_92/irene/lake1.jpg

[uglyota]

sweet. What'd you paint the rubrail with?

[Reckless]

sweet. What'd you paint the rubrail with?

hopes and dreams:flipoff2:

[Seth]

Hopes and dreams? wtf are you talking about rowdy?

looks good guys, glad to see it out on the water. Even matches the hoe!

How'd it come out good deal wise after it was all said and done?

The 1100 sticker makes me chuckle.

Also, what is the red switch for? Batteries?

[Eckert]

Also, what is the red switch for? Batteries?


Also, the twin batteries and switch,

;)

[BMFScout]

I wouldn't say at this point it is a "good deal" by any means, and it still needs some interior work. I would say it would be difficult to find a comp boat like this that is fuel injected, new interior, etc. for what I have in it. I mostly like the fact that everything is a "known" in the boat now, and it's been paid for since day one. I don't finance toys.

[BMFScout]

sweet. What'd you paint the rubrail with?

trim paint so it will match Fred's Scout.

[FJAggie07]

it's been paid for since day one. I don't finance toys.

Good plan, very good plan. Something I am glad I figured out about a year ago.

[DRAGOONRANCH]

http://www.texas4x4.org/showthread.php?t=29038

So you can pull my fat arse up on a set of skis. :D

[AggieTJ2007]

he is in corpus just let me know and i will go pick it up for you