Sharpe
07-26-2005, 11:46 PM
I cant remember how many of the posts I've made so here's the newest one.
2 rusty ass 6.2L diesels, same as before $50 each
3 Chevy CUCV grill gaurds. Will fit any 80's Chevy or GMC. $20 each
Chingaso hugeass bumper off of parts truck. This thing is a monster. $30 for my trip to doctor after removing it from the truck.
2 14 bolt FF Cab and chassis dually axles. One is a later model with the fins all over the diff, the other is an earlier model. Both are disassembled and have been in the weather for awhile. The later model has a royally FUBAR'd spindle so the housing is useless but all parts are available off either axle. Prices on request.
Kickass flatbed with jigantic fuel tank(s). This came on a parts truck and is a prety cool bed. It has the 4" diameter gooseneck hitch with the hole through it mounted permanently on the bed. The real neet part is the fuel tank and storage lockers. The tank looks huge, its about 2 1/2x 4 feet wide and I dont know how deep, probably about 2'. There might be two seperate tanks, because there are filler necks on both side of bed, but they could also be for the truck's saddle tanks. In any case, $100 for the bed (just for the trouble of taking it off).
Inner and outer fenders for a C/k series (90's body style) Chevy or GMC. The fender pictured is slightly damaged at the front but easily repairable. The other is in perfect shape, both are white. $20 per side (inner and outer).
Power steering box for C/K series Chevy or GMC. I'm prety sure the boxes are the same between 2 and 4 wheel drive, but just in case, this one came off a 2wd with only 96k on it. $30
454 exhaust manifolds. Off 91 TBI motor. No cracks. $75
12 bolt rear axle. Unknown gears or condition but it spins easily. $50
52" rear springs. Out of 70's GMC 1/2 ton. Kinda rusty but not bad. $20
350 Core. Out of 70's GMC 1/2 ton. Unknown condition, but probably ****ty. Its probably a 4 bolt main but I'm not sure. Missing distributor cap and rotor and misc. accesories. $40
2.8L V6 out of 85 S10 blazer. All there except throttle body. Take whatever you want for the engine. $20
85 S10 rear axle. Diff has 10 bolts, unknown condition or gears. $10, one for each cover bolt.
85 S10 rear springs. No eric, I havent measured the length or width yet, but I'll get around to it. $10
292 Straight six. Jimmy, buy this damn motor. Out of 80 Chevy crewcab 1 ton 2wd. Missing a bunch of ****, inside is probably good. $20
2 rusty ass 6.2L diesels, same as before $50 each
3 Chevy CUCV grill gaurds. Will fit any 80's Chevy or GMC. $20 each
Chingaso hugeass bumper off of parts truck. This thing is a monster. $30 for my trip to doctor after removing it from the truck.
2 14 bolt FF Cab and chassis dually axles. One is a later model with the fins all over the diff, the other is an earlier model. Both are disassembled and have been in the weather for awhile. The later model has a royally FUBAR'd spindle so the housing is useless but all parts are available off either axle. Prices on request.
Kickass flatbed with jigantic fuel tank(s). This came on a parts truck and is a prety cool bed. It has the 4" diameter gooseneck hitch with the hole through it mounted permanently on the bed. The real neet part is the fuel tank and storage lockers. The tank looks huge, its about 2 1/2x 4 feet wide and I dont know how deep, probably about 2'. There might be two seperate tanks, because there are filler necks on both side of bed, but they could also be for the truck's saddle tanks. In any case, $100 for the bed (just for the trouble of taking it off).
Inner and outer fenders for a C/k series (90's body style) Chevy or GMC. The fender pictured is slightly damaged at the front but easily repairable. The other is in perfect shape, both are white. $20 per side (inner and outer).
Power steering box for C/K series Chevy or GMC. I'm prety sure the boxes are the same between 2 and 4 wheel drive, but just in case, this one came off a 2wd with only 96k on it. $30
454 exhaust manifolds. Off 91 TBI motor. No cracks. $75
12 bolt rear axle. Unknown gears or condition but it spins easily. $50
52" rear springs. Out of 70's GMC 1/2 ton. Kinda rusty but not bad. $20
350 Core. Out of 70's GMC 1/2 ton. Unknown condition, but probably ****ty. Its probably a 4 bolt main but I'm not sure. Missing distributor cap and rotor and misc. accesories. $40
2.8L V6 out of 85 S10 blazer. All there except throttle body. Take whatever you want for the engine. $20
85 S10 rear axle. Diff has 10 bolts, unknown condition or gears. $10, one for each cover bolt.
85 S10 rear springs. No eric, I havent measured the length or width yet, but I'll get around to it. $10
292 Straight six. Jimmy, buy this damn motor. Out of 80 Chevy crewcab 1 ton 2wd. Missing a bunch of ****, inside is probably good. $20