15" wheels with 8x6.5 lug

[RCcola55]

i just need two wheels that are either 15x8 or 10 with a 8x6.5 lug pattern, i dont care what color or design they are as long as the are in good shape and cheap

[Shaggy]

these are gonna be hard to find... austin had to get them custom made ... he actually has a set that he isnt using anymore you ought to give him a call 5124681604

[RCcola55]

thanks ill try that

[fbronco86]

thanks ill try that

i got mine for 35 bucks at discount tire

[RCcola55]

i looked on thier website to see if they have any but it came up with 0 results but i could just be an idiot

[Shaggy]

he got his through discount...they had to order them from the custom guy though... it always seems to be cheaper when they make em custom... my 17s on my bronco were custom and then they started making them a month later and were a lot higher

[RCcola55]

ok sounds good ill do that this weekend

[stx4wheeler]

ryan go look at my thread on fullsize bronco in the sas section, its a sticky on coils spring dana 60 sas it has the guys number, and name, and extension with summit that can get custom made 15 inch wheels, in any back spacing you need, if you just want a regular 4 in backspacing you can order it from sumit for like 90 bucks for both wheels. and you gonna come get this motor and give me some $'s or what? im getting tired of it setting here.

[redneck_aggie09]

I'm not big on wheels/rims sizes and what not, but the rims i've got at 16s from my dodge but the lug pattern doesnt fit on an 04 jeep wrangler. anyone know of any cheap 16s that will fit on a wrangler? preferably black, but if not, they'll be spray painted prolly! haha my wrangler friend hates the chrome look

[RCcola55]

i got the wheels from discount and ill come get that motor this week kevin

[william_ace]

im gonna repo the sterling

[RCcola55]

never

[stx4wheeler]

i got the wheels from discount and ill come get that motor this week kevin

aight cool man jsut make sure and get it this by saturday cause i need it off the trailer for next weekend.

[RCcola55]

will do, when would be a good time and if anyone is paying attention i need a hoist to get this motor from 218

[stx4wheeler]

monday, wednesday and friday i am off at about 2 pm, thursday and tuesday about 3 0r 5 depending how studious i am being, i think tate might have a eninge lift talk to him, also i can haul it to you house orwhatever and we can take the tranny and trans off at my place and unload them, then jsut pull the pin on the dump on the trailer and get the motor off that way, then you just need to get it picked up and on a stand or something of the sort.

[Shaggy]

no lift... i have a stand you can borrow but no lift

[RCcola55]

sounds good frick but i dont know about the rolling the motor off part, me and the roommates may just have to heman it on to the stand and tate i have a stand thanks though, but i may need to borrow ur torch or maybe u could assist me in my tubing notching that would be swell

[Shaggy]

no prob

[RCcola55]

sweet, just let me know when a good time would be

[stx4wheeler]

well not rolling it exactly but sliding it off is what i meant it isnt gonna move very fast at all take the heads off on the trailer maybe as well to take some weight of, then maybe man handle it> or slide it off the trailer and dismantle on the ground ie heads, intake, drain oil then and take off acessories,set it on its end or have a spare tire to rol it onto once the heads and intake are off then take out the crank and parts from the bottom.

[RCcola55]

ok that sounds better, i just imagined a 351W block rolling down the driveway into the caddy

[BMFScout]

I've loaded a 454 long block off of a little red wagon and into the truck with just help from 4 other guys. Was it safe? Would I do it again? Did I want to do it in the first place? No.

[Shaggy]

try getting a 7.3 block into the bed of your truck by yourself with just a floor jack and some cender blocks

[BMFScout]

try getting a 7.3 block into the bed of your truck by yourself with just a floor jack and some cender blocks

Next time try cinder blocks, might work better ;)

[Shaggy]

ass... u know i cant spell... just ignore it

[RCcola55]

dont worry i understood and thats all that counts

[stx4wheeler]

so whats the deal?when you want to get this thing?