Diesel Hypertech Programmer

[KrazyKarl02]

So I found a guy selling a hypertech programmer for my truck, pretty cheap. For those that don't know I have 99 F250, 7.3L Diesel. The hypertech claims, 3 different program modes, with one adding like 100hp with gains in fuel economy.

Anyone ever used one? Good experience or bad? Any programmer better?

[eight]

You will not get better mileage. That's just majic smoke they blow up your ass so you can justify the cost. All the programmers do the same thing. Make truck go faster and blow some smoke. Cheapest new is superchip off ebay. If it's a good price get it, it'll be fun.

[AgDieseler]

Hypertech blows - actually decreases power on level I in some configurations. Edge is the best hp/dollar value.

[BMFScout]

My friend had one on his lifted f-250, I drove it down to College Station and back, it had balls.

[jerryg79]

Having driven your truck all weekend i think this money could be better spent on steering components and some new rotors :flipoff2:

PS i'm probably the last person that should ever call someone out on lack of maintenance to their vehicle :D

[Doug Krebs]

Having driven your truck all weekend i think this money could be better spent on steering components and some new rotors :flipoff2:

PS i'm probably the last person that should ever call someone out on lack of maintenance to their vehicle :D

Idiot! He's trying to go faster, not stop nor steer. :laughing:

[stx4wheeler]

exaclty you dont need brakes if you can passs everyone else on the road :flipoff2:

[KrazyKarl02]

exaclty you dont need brakes if you can passs everyone else on the road :flipoff2:
Frick, just when I think you are the dumbest man alive, you say something like that, and completely redeem yourself. I have done the brakes once on my truck (25k ago), there is a small vibration in the front rotor now, but it is no where near the earthquake that was Jerry's front end.

Anywho, a hypertech programmer for about $50 I think would be good, and I think I have one for $50.

[KrazyKarl02]

Hypertech blows - actually decreases power on level I in some configurations. Edge is the best hp/dollar value.

I appreciate your thoughts, but checking Ebay, I do not see how Edge has the better HP/$. On ebay they are twice as much and only give a claimed 60HP. Hypertech gives 100HP claim.

[AgDieseler]

I appreciate your thoughts, but checking Ebay, I do not see how Edge has the better HP/$. On ebay they are twice as much and only give a claimed 60HP. Hypertech gives 100HP claim.
I should have been more thorough in my post. Since some hypertech programs generate unwanted power losses - actual hp decrease, and wierd torque curves where they once were flat - I'm not a big fan of them.

Edge is the safest programmer other than the expensive ass Banks. It adjusts pulse timing and pulse width, and in my opinion strikes the best balance among power, egts and smoke, and economy. There should be a multiple stage Edge that does 30, 60, 90, and 125 hp. They each have very flat torque curves.

That doesn't mean other programmers aren't good, but they just aren't my favorite. I'm sure you'll enjoy an extra 100 hp.

[jerryg79]

I have done the brakes once on my truck (25k ago), there is a small vibration in the front rotor now, but it is no where near the earthquake that was Jerry's front end.



Don't speak ill of the dead! :flipoff2:

[KrazyKarl02]

Don't speak ill of the dead! :flipoff2:

I am quite certain your truck is still running. You might even see it at one of your job sites. I suspect the person who bought it hangs out around construction sites a lot.....

And in the Red Rockets defense, it would always do a wicked smoky nasty burn out!

[KrazyKarl02]

I should have been more thorough in my post. Since some hypertech programs generate unwanted power losses - actual hp decrease, and wierd torque curves where they once were flat - I'm not a big fan of them.

Edge is the safest programmer other than the expensive ass Banks. It adjusts pulse timing and pulse width, and in my opinion strikes the best balance among power, egts and smoke, and economy. There should be a multiple stage Edge that does 30, 60, 90, and 125 hp. They each have very flat torque curves.

That doesn't mean other programmers aren't good, but they just aren't my favorite. I'm sure you'll enjoy an extra 100 hp.

You sir are wise beyond years

[agjohn02]

You sir are wise beyond years


he talks like that in real life too :flipoff2:

[Sharpe]

Whats the best programer for my 6.2?

[agjohn02]

Whats the best programer for my 6.2?



http://cgi.ebay.com/BRAND-NEW-GALVANISED-ANCHOR-CHAIN-12MM-DIA-NO-RSV_W0QQitemZ4588869473QQcategoryZ15263QQrdZ1QQcmd ZViewItem

[sasquatch]

***

didn't you get a turbo off of a parts truck and were going to put it on there?

[william_ace]

the motor was a 6.5 with that banks kit. would it fit robert? or is it a totally redesigned motor

[fbronco86]

Whats the best programer for my 6.2?


Yes my ole 7.3 needs a chip too :flipoff2:

[jerryg79]

Whats the best programer for my 6.2?

del *.* :flipoff2: