View Full Version : Scout Diet
BMFScout
07-13-2006, 10:19 PM
Another Parts Scout:
This is mostly complete minus the right front fender, grill, and core support, and no transfercase.
Here is the parts list on this one:
345- unknown condition
The 4wd 727 is still in it, and I think the dana 20 is as well, but I need to check.
2wd 727
front and rear complete 44's, unknown gear ratio (I'd bet 3.07's)
Decent pair of doors
extra driver door
good rear glass hatch
Fair condition quarter panels
good condition steel top, a few dings
(2) Radiators of unknown condition/core count
one rock chip on the windshield
good stock springs
skid plate/ gas tank
I'd like to get $400, but will entertain offers. If no one wants the whole thing, I will part it out, but would rather not.
I also have a couple of front dana 30's if anyones interested.
BMFScout
07-13-2006, 10:19 PM
more pics
Cajun
07-14-2006, 12:20 AM
I'm interested in the body if anyone wants the axles or other stuff.
AggieTJ2007
07-14-2006, 12:22 AM
how much for thte dana 44? and why is there an ingin in the poassenger seet
CheapJeep
07-14-2006, 12:38 AM
It even comes with a 5gal. gas can and empty case! :gigem:
colman
07-14-2006, 08:20 AM
as for those 30's i will take one for spare shafts and hubs, what do you want for one, if one happens to have a lsd then that would be amazing too
jerryg79
07-14-2006, 08:25 AM
how much for thte dana 44? and why is there an ingin in the poassenger seet
to go with the transmission....duh!
TMatheaus
07-14-2006, 10:17 AM
what are them 30's out of
BMFScout
07-14-2006, 10:22 AM
a Scout, disc brake
BMFScout
07-14-2006, 10:23 AM
how much for thte dana 44? and why is there an ingin in the poassenger seet
There was another engine in there originally. Fred said it came with two motors, and I foolishly thought one of them would be in the engine compartment...I was wrong.
Fredo
07-14-2006, 10:49 AM
as for those 30's i will take one for spare shafts and hubs, what do you want for one, if one happens to have a lsd then that would be amazing too
Yeah, not so much. Something tells me a narrowtrac cj 30 and a scout 30 aren't going to have the same shafts.
tigweld
07-14-2006, 11:21 AM
that last pic is of mine, diamond plate bling in da floorboard gangsta-skid-steer-scout
colman
07-14-2006, 11:23 AM
i guess i should have realised they wern't cj but would the hubs work for me as spares?
agjohn02
07-14-2006, 02:28 PM
i guess i should have realised they wern't cj but would the hubs work for me as spares?
nope, jeep = 5 bolts, scout = 6 bolts
BMFScout
07-14-2006, 02:35 PM
that last pic is of mine, diamond plate bling in da floorboard gangsta-skid-steer-scout
whoops
agjohn02
07-14-2006, 02:43 PM
i was wondering where the engine went in that last pic
robertf03
07-14-2006, 05:36 PM
nope, jeep = 5 bolts, scout = 6 bolts
depends on the year, they didn't make scouts long enough to get into the 5 bolt era.
colman
07-15-2006, 02:36 PM
my cj is 5 bolt, so i'm sol, i'm just trying to start looking around for spares since i just put a 4:1 the tcase in and am about to put on 36's so i will probably start to break stuff
colman
07-17-2006, 03:56 AM
what gears are in the d30's i need a 3.30 for another jeep at the shop
colman
07-17-2006, 04:22 PM
i just recounted the teeth and need 3.54, happen to have that, i'll take the carier also if its easier
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.