Ball joint dana 60 parts

[Busa]

I need some knuckles for a ford hp dana 60 balljoint style. Could use some othere parts if you dont need them.

[JB]

I have...

1 stock slider caliper style passenger side $50
1 semi-stock slider caliper drivers side (TRE hole filled with brass b/c of a Vilas **** up) $25
1 bolt down caliper style drivers side with the TRE hole drilled/reamed out to something that I forgot $25

[JB]

I also have a full set of shafts, but I like them for spares, so unless you want to pay more than they are worth, let me know

I think I have stock diff cover around here somewhere. Possibly a stock halfturn locking hub too.

[stx4wheeler]

john ill take the hub, and possibly the cover as well. if busa dont want them

[Busa]

I am picking up a ford superduty dana 60 this week. It has all the shafts. I will need everything from the knuckles out. I think to run 35spline outer shafts i will need chev spendals and hubs? I realy dont need shafts. I plan on upgrading when i put the ARB and grears in. I also will be needing some rear disk brake parts for a dana 60 aswell. that will also be upgreated to 35splines ARB and gears. Sorta a long project for my jeep.

I will be selling a front dana 30 with 4.56 gears and ARB everthing else is stock. A rear dana 44 from driver train direct with superior shafts ARB and 4.56 gears. The rear is drill for 5 on 4.5 and 5 on 5.5. Will also have some 35 procomp tires and rims for sale with 5in sping unders spring.

[JB]

Superduty like 99+ Ford? All my stuff is from a 92ish-97 F350

I do not thnk you need chevy outers to run 35spline outers on a Ford 60.

[Busa]

I think you can use the knuckles from any year. I dont wont to use ubaering stuff.

[JB]

ALright, well I am a little confused as to what you have, but if you need the knuckles, PM me.

[stx4wheeler]

http://cgi.ebay.com/ebaymotors/Front-Dana-60-Inner-C-Knuckles_W0QQcmdZViewItemQQcategoryZ33731QQhashZit em260050177406QQihZ016QQitemZ260050177406QQrdZ1

[JB]

late notice, but ill bring them to tonights meeting