What do you have to do before clayton?

[Doug Krebs]

We have a little over a week till most of us head out.

I have alot to do, but most of the time consuming crap is unnecessary.

Must do:

Bumpstops and limiting straps.

Try and help the steering (replace pump and box)

Spring plates.

Unnecessary:

Hydro assist

Can't do much until monday after my last final, but I can take off work tues-thurs to finish it. Right now I'm just trying to get all the parts ordered that I need so I don't have to wait on parts or waste time trying to get parts.

[Fredo]

-Charge battery and make sure it still runs
-Replace whatever is messed up in front axle (lockright? hub? whole thing?)
-Check Fluids
-pack tools and spares

[DRAGOONRANCH]

Jeep is full of gas, just need to bolt the tranny cover back on and maybe throw some more paint on it.

The cheby needs front breaks, 44"s put on hummer rims, driveshafts, tranny and atlas bolted up and modify crossmember, crossover and highsteer (waiting on parts still)

[agjohn02]

-buy 750 of soco for jerry
-drive to oklahoma

[BMFScout]

hand holds for the passenger
mount hydro assist cylinder
rear seat?
I think this is about the time we started building last year!

[jerryg79]

Take 48 beers i have leftover from party, put in cooler, add ice, put in truck.

[Doug Krebs]

Take 48 beers i have leftover from party, put in cooler, add ice, put in truck.

and pray to god, the pope, etc... that when you get here I'm drinking a beer instead having the deer in the headlights look.

If I pay you back would you pick up a rim and tire from a trailer place on 45?

[robertf03]

hand holds for the passenger


working on it :gigem:

[jerryg79]

and pray to god, the pope, etc... that when you get here I'm drinking a beer instead having the deer in the headlights look.

If I pay you back would you pick up a rim and tire from a trailer place on 45?

yeah how much is it gonna be?

[Doug Krebs]

yeah how much is it gonna be?

Not sure, I'll call tommorow. I'm assuming around a $100. I just don't want a flat ruining our trip.

It's this place, they are on the east side of 45, about 5 minutes past fry's going south if I remember correctly. I have to go get the trailer first to get the bolt pattern.

http://www.trailerwheel.com/sub_accessories/accessories_tireswheels.html

[jerryg79]

yeah i know where it is, just let me know.

[JeepPhisherman]

-buy 750 of soco for jerry
-drive to oklahoma

Want me to get it from work tomorrow night?


All I've got left is to pack liquor and a few spare pairs of boxers and I'll be set.

[AggieTJ2007]

ive got to install driveshaft
connect cable shifters
add fluids
build new front CA bracket
Build extra tranny mount

I hope that is it

[agjohn02]

Want me to get it from work tomorrow night?


All I've got left is to pack liquor and a few spare pairs of boxers and I'll be set.


sure thing. you bringing to clayton and we pay you there?



sweet, now all i have to do is take a diff eq final and the GRE.

[JeepPhisherman]

sure thing. you bringing to clayton and we pay you there?



sweet, now all i have to do is take a diff eq final and the GRE.

sure. 100 or 70 proof?

[agjohn02]

it's up to jerry, but im sure he should stick to the 70 proof. :flipoff2:

[jerryg79]

it's up to jerry, but im sure he should stick to the 70 proof. :flipoff2:

I'll stick with 70 proof, 100 proof gives me bad hangovers.

[BMFScout]

working on it :gigem:


whatever you fab, I'll weld to the cage. Make us proud! :gigem:

[robertf03]

how far from the cage to the pass. seat should the bar be?

it'll be bolt on tube clamp style, don't want to burn the shiney stainless :D

[BMFScout]

I'm not sure, let's look at it tomorrow night.

[Fredo]

I figured out what that popping in my front axle was. Upon looking at the lockright, it looks kind of odd. If you look at the pins circled in red, those are the pins that look like they have been sheared for awhile. If you look at the oblong pin holes circled in green, that's where the pins were still in tact....fighting for life. It's amazing they held on as long as they did. Apparently one of the two finally let go and that's why I could hear all the popping in the front end. I should send the lone surviving pin into Richmond for further research. :D

[CheapJeep]

Damn!!! Glad you found out what the problem was, still made it through Gilmer though. :gigem:

[stx4wheeler]

have to be done,
finish setting gears
install ram cylinder and reconnect lines
finish some welding on radius arms
connect front driveshaft
check all bolts for tightness
install shafts

Need to be done but can get by without it
swap cam to get all my brakes back
build anti wrap bar-have all the pieces and material just need the time
finish radius arm crossmember-same with this one on pieces already ready to weld-just need to drill some holes.
replace front hard brake line with a smaller one.
take out tiny stock rear degreed block

i wish i didnt have three finals fawking school shizz

[jerryg79]

I figured out what that popping in my front axle was. Upon looking at the lockright, it looks kind of odd. If you look at the pins circled in red, those are the pins that look like they have been sheared for awhile. If you look at the oblong pin holes circled in green, that's where the pins were still in tact....fighting for life. It's amazing they held on as long as they did. Apparently one of the two finally let go and that's why I could hear all the popping in the front end. I should send the lone surviving pin into Richmond for further research. :D

I think you should add that to the bag of metal pieces you find in the oil pan. Its strong and battle-proven, there has to be a place in that motor for it somewhere! :gigem:

[DRAGOONRANCH]

oops, forgot to mention pick up pete. I am headed down to crosby sunday night so we can be at the county clerks office at 8 a.m. monday. Anybody on the NE side of town got a couch for me and my cuz to crash on, if not, crosby inn here we come. :gigem:

[Graystroke]

Beer, coozie, skoal (special occasion), and meet jimmy on side of road?

[DRAGOONRANCH]

ok, found the right parts for the front brakes, and mounted the fowtyfo's on the H1's. Either the H1's are harder than I thought or I am out of shape. :eek: Now off to the shop with the calipers and pads.

[jerryg79]

sure thing. you bringing to clayton and we pay you there?



sweet, now all i have to do is take a diff eq final and the GRE.

john i forgot you need to get a sim card, they didnt send a new one with my new phone, they're about $5 shipped on ebay. I'll give you a wall and car charger so dont worry about that. I put it in my truck today so's i wont forget it.

[J Cooper]

just have to tighten up a bolt on new power steering pump, get a shorter belt, clean out the interior (storage unit), and add some power steering fluid and hope torque converter isnt ****ed up.

... oh but i guess that would mean being in texas to do this ****... as of now im stuck mississippi till sunday and i dont even know if i have next friday off... what a cluster ****!!!

[agjohn02]

john i forgot you need to get a sim card, they didnt send a new one with my new phone, they're about $5 shipped on ebay. I'll give you a wall and car charger so dont worry about that. I put it in my truck today so's i wont forget it.


i thought i could just use the one i have in my phone?

[jerryg79]

i thought i could just use the one i have in my phone?

oh you made it sound like you had a crappy old phone so i ASSumed no sim card.

[agjohn02]

its probably the first they ever put a sim card in. it is old and crappy.

[RCcola55]

Done!!!

[redcagepatrol]

all done - will load on trailer today!

[Fredo]

9:15am on the saturday before?? You go getter you! :)

[Lynda]

Weather is going to be beautiful (as long as it doesn't change). It will be 70 during the day, partly cloudy, and 45ish at night. :cheers:

[Sharpe]

I'm just about ready.

[JeepPhisherman]

I'm ready to go. Drug my cold weather **** out of the attic and liquor is boxed and ready to go. We going to try and cook out one night or what? What's been done about food in the past?

[TMatheaus]

need to pack clothes, got liquor, here is a link for the weather http://www.weather.com/outlook/events/sports/tenday/USOK0114?from=36hr_topnav_sports

[RCcola55]

damnit i broke a shock, gotta fix that now

[jerryg79]

I'm ready to go. Drug my cold weather **** out of the attic and liquor is boxed and ready to go. We going to try and cook out one night or what? What's been done about food in the past?

yeah what is the plan this year?

Last year we had fajitas on Sat. night provided by the club.

Clayton Country in is always good.

Anyone bringing a grill? Krebs you got that one me and mike rebuilt?

[J Cooper]

We going to try and cook out one night or what? What's been done about food in the past?


i have a huge brisket that i can bring if we wanna cook sat night.

last year the club threw in a $100 or 2 and paid for a meal sat night.

[sasquatch]

just need to replace my brake master cylinder. its bleeding down bad, i noticed today. i've got a new one already.

[AggieTJ2007]

im done

[Fredo]

I've been working on the tow rig, but so far looks like i'm just about ready to go. :)

[BMFScout]

I don't think I'm ever really done before a run, but I think I'm about done with what will get done before this trip. Need to bolt up and plumb the ram. I need to look over everything, fluids etc.

[fbronco86]

Anyone bringing a grill? Krebs you got that one me and mike rebuilt?

Yeah we at least should be able to use that damn grill whenever we want :flipoff2:

[Doug Krebs]

Yeah we at least should be able to use that damn grill whenever we want :flipoff2:

You can have it, I have a better one now! :flipoff2:

[jerryg79]

Do you have one that we can bring?

[Doug Krebs]

Do you have one that we can bring?

Yeah, not sure how much (don't need no gas got propane!) is left. I'll weigh it if I remember

[fbronco86]

You can have it, I have a better one now! :flipoff2:

I prefer charcoal thanks :gigem:

[J Cooper]

ill be ready as soon as robbie puts a new belt on my power steering :flipoff2:

[JeepPhisherman]

I can get a brisket from sams club, cook it partially here overnight and then we can wrap it in some foil and throw it in someone's engine bay for the trip to OK.

We cooked a brisket in my bro's buddies honda on the way from NY to NC a couple years back.

[CheapJeep]

ill be ready as soon as robbie puts a new belt on my power steering :flipoff2:
yeah, yeah, I'll get on it tomorrow morning after my last final. I had to finish up the other CJ7 this afternoon so we wouldn't get fined...

[Shaggy]

So completely different year but still a good question. 3 Weeks

On Tate Jeep
I have to:
finish Skid/Crossmember
Retube Driveshafts Need new U-Joints too
Finish Installing new Roll cage
Weld grab handles on new cage
Touch up rattle can paint cage
Install seats and center console
Mount Low range cable shifter
Add hood latch.
Seat Belts
Install new Top
Need to add some speakers
Relocate CB

Jason's Jeep:
Install inner fenders for new front fenders
Relocate everything that came off factory fenders
install a new cone style air filter
Cut hood for fender clearance
Install Rock Sliders
Paint and install Sport cage
Install new top
Figure out Drive line parking brake lever in cab

Busa Jeep:
Change Oil
Tighten up Limit Strap in rear

Car Hauler (if I use it and only take one jeep)
Drive over fenders

Car Hauler #2 (Jason using)
Rewire some lights
add brakes to one axle

[KrazyKarl02]

Option 1
* Load Cooler
* Hop in neighbors jeep or Kevin's Ride

Option 2
* Pull chevy 350
* Gut wiring
* Pull trans and t-case
* Install new 350
* Install Trans
* Install Atlas
* Fab cross members
* Fab Skid Plate
* Wire Engine
* Remove Dana 44, springs, and hangers
* Remove 14 bolt
* Install Sterling
* Install hangers, springs, and Dana 60
* Adapte full hydro to Dana 60
* Driveshafts
* Install "Footprint" style gas pedal

Hmmm, which one is looking more likely....

[robertf03]

remove old sushi from fridge
install new sushi in fridge

[DRAGOONRANCH]

Reinstall ripped off fender.
Fiddle with carb if I feel frisky.

[DRAGOONRANCH]

Option 1
* Load Cooler
* Hop in neighbors jeep or Kevin's Ride

Option 2
* ......

Hmmm, which one is looking more likely....

Option 1 allows for way more alcohol consumption. ;-)

[85cj7]

Replace front bent leaf springs with new RE-1.5 springs.
Replace header flange gaskets to fix annoying exhaust leak.
Replace valve cover gaskets to fix annoying oil leak.

None is really necessary. We'll see how motivated I feel.

[TdmayfieldIV]

-build pimp ass doubler crossmember
-build pimp ass transmission crossmember.
- Shorten rear and lengthen front driveshaft
-bolt shifters on
-put marvel mystery oil in the motor
-build new tie rod.
-Tell my trailer to suck a dick, borrow chet's gooseneck.
All of this will happen the day before almost guaranteed.

[JB]

Load cooler
Load trailer
Boom

[bcolman]

I need to lay eyes on my new rig, then decide what I have to do, according to my brother is is just rear axle swap, fab track bar mount, and not sure what else, either that or take one of the other rigs, we will see what happens

[sam_hodnett]

Need to see if my front locker is broken. If so replace it, if not diagnose the strange clicking noise

[AggieTJ2007]

Get Beer, drink beer
Pick up Jimmy
Haul ass

[Fredo]

Fix Alto damage (bent LR spring, busted rear axle, broken LF ujoint, whatever else I find along the way)
Give Lurch his yearly Lucas/Oil change
possibly touch up paint (woodgrain and yellow is showing through pretty good again)
load up.

[Fredo]

Need to see if my front locker is broken. If so replace it, if not diagnose the strange clicking noise

Sam, refer to post #21 in this thread. I'm pretty sure you are having a similar issue.

[colman]

Move 3 other jeeps around blocking red jeep, make front driveshaft, new starter and solenoid.

[Shaggy]

Made lots of progress. Jason's jeep just needs some cleaning up under the hood where things got relocated, hood latch added and the whole top thing was a mess.
We tried to put new top on his jeep and it was too tight to get all the way on. When trying to put window in we broke the zipper. So I pulled it off and stuck it on mine. I got it on all the way and went to put opposite window in and broke that. Zipper. So I guess it is just an expensive POS I'm sending back. Never even opened the box for the second one. Hopefully they can get me some different tops soon.
Tate jeep lacks driveshafts. Need antifreeze overflow that I trashed last trip. Some tweaking of shifter linkage after dive shafts are in and of course a new top. There are other things but mostly not needed before the trip.
Busa jeep got air in front tires today because it decided to not have any in them. I don't think I am going to bother taking it to Clayton.

[colman]

Jeep tops can't be cold. Esp when new. It needs to be warmed up the material shrank. Put it inside the house or in a car with the heater on or something. The material shrinks when cold.

[redcagepatrol]

Need to check out Lynda's Jeep and make sure everything is still OK from our trip to CO. It was still working when I backed it into the garage so it should be good. We still have the problem with blowing out the power steering pump - did it once in CO. Might see about making another big change there.

[Shaggy]

I heated the top. The main part went on ok. But do to poor location and crappy quality zippers I broke another one. I'm shipping these poorly made crap back and getting something else.

[TdmayfieldIV]

what brand are they?

[Shaggy]

Rugged Ridge XHD Bowless. They are sending me two more of the same tops. He said I would have to pay return postage if I get another brand. Also said to heat the crap out of them and then use a hair dryer to get them on the first time. If the new ones don't work then I'll pick out a different one.

[Shaggy]

Well the only thing left on the Tate Jeep is putting the rear driveshaft back in when I get it back from being shortened.
Jason's TJ only lacks hood latch instillation and new top when it comes in (if it does that is)
Car Hauler #1 has new fenders coming in tomorrow some time. Old ones need cut off and new ones installed. Also have to fix a badly bent taillight housing
Car Hauler #2 is just going without brakes. I don't feel like working on it.

[Shaggy]

Oh and the first top went on the Tate Jeep no problem. It helps when it isn't in the 30s outside

[85cj7]

Replace front bent leaf springs with new RE-1.5 springs.
Replace header flange gaskets to fix annoying exhaust leak.
Replace valve cover gaskets to fix annoying oil leak.

None is really necessary. We'll see how motivated I feel.

The jeep could still use the exhaust and valve cover gaskets replaced. . . .


I also need to replace my 'quick fix' grade 8 bolts with ARP studs for the driver side high steer arm.

Load it up with beer and gas and I'm good to go.

[KrazyKarl02]

Check all the oils, check the u-joints, and load the cooler. Taking the scout, jeep still needs work.

[Sparling]

Traction bars, rear drivershaft, lots of lights, and cupholders

[Fredo]

Lurch:
-Rewire Control switches for fans, lights, OBA
-Replace headlight switch
-Replace entire cooling system (done)
-Remove "rebuilt" radiator that is apparently bad and install new radiator
-Wait for new radiator
-replace power steering pressure hose and return
-get shorter belts for new alternator pulley
-Disassemble front axle and repack wheel bearings
-change gear oil in front axle
-grease all ujoints
-change engine oil and filter
-install new stereo head unit
-install different windshield frame and windshield

Trailer:
- Weld deck plate that has broken loose
- Get tire with nail in it patched
- Repack bearings and inspect suspension
- Replace clearance lights on rear

Tahoe
- Reinstall transmission, exhaust, etc associated with pulling out the trans.
-waiting on trans to be finished being built
-waiting on torque converter to be built and shipped in
- change engine oil
- rotate tires

I'm sure there is some stuff I'm forgetting...

[RCcola55]

-Distill 30gal of mash
-pack

[JB]

Jeep:
Figure out what is wrong if anything with transmission
exhaust leak
put top on
Durango alternator
install PS pump skid thing
Clean insides of all Shiloh mud
Inspection sticker is out.

Trailer:
Think its good

[AggieTJ2007]

Jeep

-finish welding stuff
-put front axle back together
-top off fluids
-change oil
-build skid plate for the motor/trans/transfer cases

-doors and a windshield would be nice but I don't know if I will get there.

Trailer
-figure out why the brakes aren't working/ replace coils

Truck
-Change oil
-Rotate tires

[Sharpe]

Jeep:
Figure out what is wrong if anything with transmission
exhaust leak
put top on
Durango alternator
install PS pump skid thing
Clean insides of all Shiloh mud
Inspection sticker is out.

Trailer:
Think its good
Put Lucas in the transmission to stretch it out for one more trip if it's seriously ****ed.

[Fredo]

Lurch:
-Rewire Control switches for fans, lights, OBA
-Replace headlight switch
-Replace entire cooling system
-Remove "rebuilt" radiator that is apparently bad and install new radiator
-Wait for new radiator
-replace power steering pressure hose and return
-get shorter belts for new alternator pulley
-Disassemble front axle and repack wheel bearings
-change gear oil in front axle
-grease all ujoints
-change engine oil and filter
-modify oil pan for hydraulic ram clearance
-replace hydraulic assist ram
-install new stereo head unit
-install different windshield frame and windshield

Trailer:
- Weld deck plate that has broken loose
- Get tire with nail in it patched
- Repack bearings and inspect suspension
- Replace clearance lights on rear

Tahoe
- Reinstall transmission, exhaust, etc associated with pulling out the trans.
-waiting on trans to be finished being built
-waiting on torque converter to be built and shipped in
- change engine oil
- rotate tires

I'm sure there is some stuff I'm forgetting...

Finished some stuff, found some other stuff, still waiting on parts. The stuff in red still needs to be done. Starting to wonder if going this year is worth it.

[redcagepatrol]

- finish wiring buggy from scratch
- test wiring, fix anything that doesn't work
- install steering column
- install dash
- final align axles to chassis, make sure it's all square
- cut down extra length of bolts at link connections
- put in heat shield on backside of interior panels
- install driveshafts
- install panels, seats, center console, seatbelts, etc... Finish assembly
- put in brake fluid, bleed brakes
- put in gear oil
- N2 in shocks
- test drive, pray that everything works
- put water in front tires
- load on trailer

- pray that Dodge and trailer and Lynda's Jeep are good to go...

[85cj7]

- finish wiring buggy from scratch
- test wiring, fix anything that doesn't work
- install steering column
- install dash
- final align axles to chassis, make sure it's all square
- cut down extra length of bolts at link connections
- put in heat shield on backside of interior panels
- install driveshafts
- install panels, seats, center console, seatbelts, etc... Finish assembly
- put in brake fluid, bleed brakes
- put in gear oil
- N2 in shocks
- test drive, pray that everything works
- put water in front tires
- load on trailer

- pray that Dodge and trailer and Lynda's Jeep are good to go...

water in front tires?

[Sparling]

Starting to wonder if going this year is worth it.

sounds like someone else

[redcagepatrol]

water in front tires?

that's how you get up big ledges

[mudtoy67]

Finished some stuff, found some other stuff, still waiting on parts. The stuff in red still needs to be done. Starting to wonder if going this year is worth it.

Let me help:


Lurch:
-Rewire Control switches for fans, lights, OBA
-Replace headlight switch
-Replace entire cooling system (done)
-Remove "rebuilt" radiator that is apparently bad and install new radiator*skip-add raw egg and ground pepper. It worked for McGuyver!
-Wait for new radiator*skip-see above!
-replace power steering pressure hose and return
-get shorter belts for new alternator pulley
-Disassemble front axle and repack wheel bearings *skip-they'll be fine
-change gear oil in front axle *skip-unnecessary
-grease all ujoints *skip-overrated
-change engine oil and filter
-modify oil pan for hydraulic ram clearance *skip-it will self-clearance
-replace hydraulic assist ram
-install new stereo head unit *skip-boom box
-install different windshield frame and windshield *skip-wear safety glasses

Trailer:
- Weld deck plate that has broken loose *skip-lurch will hold it down
- Get tire with nail in it patched *skip-nail is holding in the air!
- Repack bearings and inspect suspension *skip-ok don't skip...this club has a history
- Replace clearance lights on rear*skip-tape 12v xmas lights to rear

Tahoe
- Reinstall transmission, exhaust, etc associated with pulling out the trans.
-waiting on trans to be finished being built
-waiting on torque converter to be built and shipped in
- change engine oil
- rotate tires
*Dad still has the burban, right? :D

I'm sure there is some stuff I'm forgetting...

Relax, you're gonna make it!:D

[mudtoy67]

water in front tires?

You're a nature guy...water helps them grow!

[Fredo]

Let me help:



Relax, you're gonna make it!:D

You know me better than that BDR. Oh, and the Suburban is on the injured list. Needs a trans rebuild, tcase chain, and rear axle rebuild. The Brune fleet is in bad shape right now. You should see the planning board in the shop...there isn't even room for Mario or Chip to make a funny comment!

[Fredo]

sounds like someone else

I guess I don't catch that one. Are you slamming me, or someone else?

[Sparling]

Mostly tommy, probably a 80/20 split.

[JB]

Starting to wonder if going this year is worth it.

WTF?

Of course its worth it. It's ****ing Clayton!

[kyle]

^^^^^ Agreed

Fix tranny leak-o ring in fill tube seems to be stopping it up
install yoke and front driveshaft from last weekends break

load and go!

[Fredo]

WTF?

Of course its worth it. It's ****ing Clayton!

You speak the truth JB...

I wasn't having a very good morning and after a frustrating weekend of not getting much done after dental surgery on Friday, I spent most of the weekend on pain killers and taking naps. So I was a bit down about the whole situation this morning.

Today I got news that the Tahoe's converter will be here Wednesday, I should have Lurch's new radiator tomorrow, along with the new assist ram. So now that I know when parts are going to be here, I can start getting some stuff knocked out.

Now to get all of that done so I can build my WTWE gift!

[Fredo]

Had a pretty productive week so far. As of tonight, here's the revised list:

Lurch:

-grease all ujoints
-install new stereo head unit
-install different windshield frame and windshield

Trailer:
- Weld deck plate that has broken loose
- Get tire with nail in it patched
- Repack bearings and inspect suspension
- Replace clearance lights on rear

Tahoe
-front end alignment
-wash

Other:
-WTWE gift
-load up

[AggieTJ2007]

Jeep

-finish welding stuff
-put front axle back together - Done
-top off fluids
-change oil - It can wait
-build skid plate for the motor/trans/transfer cases -Finished it came out great

-doors and a windshield would be nice but I don't know if I will get there. Maybe afterwards, still need to run by CB and see what they have laying around

Trailer
-figure out why the brakes aren't working/ replace coils

Truck
-Change oil


Not too bad for this week. The jeep is almost ready to go, I was going to build a floor but it will act as my heater for now.

Now on to the trailer and truck.

[colman]

I have a good tj windshield frame. Glass is bad. 75$

[AggieTJ2007]

I think I am done. Still have to load the trailer, but I think the Jeep, Trailer and truck are squared away finally.

[Fredo]

Sweet. Here's my revised, revised list.

Lurch:

-grease all ujoints, check fluids

Trailer:
- Weld deck plate that has broken loose
- Repack bearings and inspect suspension

Tahoe
-front end alignment
-wash

Other:
-WTWE gift
-load up

[mudtoy67]

Nice work!

[FJAggie07]

Sweet. Here's my revised, revised list.

Lurch:

-grease all ujoints, check fluids

Trailer:
- Weld deck plate that has broken loose
- Repack bearings and inspect suspension

Tahoe
-front end alignment
-wash

Other:
-WTWE gift
-load up

Happy birthday sir.

[Fredo]

Thanks man!

[robertf03]

drain the $70 of joe gibbs break in oil, put in $60 of joe gibbs regular oil
top off all gear oil
1 quart lucas transmission goo
purchase sushi

[AggieTJ2007]

That NASCAR oil is some good stuff.

[robertf03]

Hell yeah.

I switched because I thought the rings werent seating because of the occasional smoke and was desperate for anything to fix it rather than tear it apart. found out this week it was the injector harness corrosion causing intermittent connections and ltft to go high, but the miles I put on it don't make expensive oil that big of a deal

[Shaggy]

I have the GN hooked to the truck and the Busa jeep sitting out ready to load. Only if I could convince the ol lady to let me go I could be on the road within an hour of getting off work.