Junk axles

[BroncoJo]

I'm looking for a couple of junk axles that roll. While i'm doing the drive train swap from a big bronco to a little bronco i need something so i can roll my big bronco around. doesnt have to be full size axles and maily i'm looking for a front and in the free to cheap range.

Thanks

[RockHillCJ-6]

i have a front 30 and rear 44 out of my cj, make an offer if you want them

[colman]

i want that 44 if he doesn't i need some spare shafts. i assume it is an early nt d44. mine is from a 74. i will wait to make sure he doesn't want them

[RockHillCJ-6]

mine are out of a '61

[colman]

do you know what the wms is on that rear axle. it should be 50.5 i believe, where are the axles located?

[BroncoJo]

really all i need is the front. just need so i can set the truck on it and roll it around and turn. is the bolt patern for a cj is the same as a 1/2 ton ford, 5 x 5.5 i think? Tell me whats its worth to you I don't want to spend much money since my goal is to go with big axles on it.

Thanks

[colman]

yes the axles he has are 5x5.5, so it sounds like you want the front and i want the rear, perfect
Is 20 bucks ok? i am cheap

[BroncoJo]

i'll give 20 for the front, if its ok with you. I'm cheap too.

[colman]

i'm happy if he's happy assuming the shafts are the same which i am working on finding out

[RockHillCJ-6]

sorry i dont know what wms is? $20 is fine for each, i have them at home, which im going there this weekend so i could bring them to the next meeting if thats good for yall. also if you want i have some 29" super swampers that i had on the jeep, if you want them to use to build your bronco on. $175 for all 4 mounted with 95% left

[DRAGOONRANCH]

wheel mounting surface, this is how you figure how wide it is. You measure from wms to the other.

[RockHillCJ-6]

oh, ok, thanks. so colman do you want me to measure it and get back to you?

[BroncoJo]

Next meeting sounds fine. Can you measure the front for me too? Not really interested with the tires right, now but i'm kinda in the process of making a killer go cart so depending on how that goes i might have a use for them later.

Thanks

[RockHillCJ-6]

sure, ill go ahead and measrure both for yall on friday or sat when i go home.

[colman]

i have been researching and have been told that your axle is a 2 peice 19 spline so if it is stock then i can's use it. if it is a later model then i can. so take a picture and measure and get the serial number if you can. thanks
Andrew

[BroncoJo]

If the back axle doesnt work out for colman I can probly buy it.

[colman]

i'm 99% sure so go ahead and get it adn i will keep looking

[Eckert]

sorry i dont know what wms is? $20 is fine for each, i have them at home, which im going there this weekend so i could bring them to the next meeting if thats good for yall. also if you want i have some 29" super swampers that i had on the jeep, if you want them to use to build your bronco on. $175 for all 4 mounted with 95% left

whats the size/bolt pattern on the wheels?

[RockHillCJ-6]

wheels are 5 on 5.5

[Eckert]

i guess 15"? how wide are the tires?

[RockHillCJ-6]

yes 15", i think theyre 29x8s. you want me to bring them to the next meeting so you can look at them?

[BroncoJo]

Did you get the axles? If you want I cant pick them up before the next meeting.

[RockHillCJ-6]

sorry i didnt get them, ill have to give them to you at the meeting on wed.

[BroncoJo]

Are you bringing them this meeting (2-7) or next meeting?

[Eckert]

yes 15", i think theyre 29x8s. you want me to bring them to the next meeting so you can look at them?

no man. thanks though. im still shooting for the massive 31's.

[RockHillCJ-6]

im bringing them tonight

[BroncoJo]

im bringing them tonight

Then I will be there.