View Full Version : D60 axle parts and some random toy stuff
CRaSHnBuRN
07-10-2007, 03:25 PM
Stock toyota power steering reservoir- $20
http://tamor.us/members-rigs/albums/album167/100_0338.thumb.jpg
Roger Brown 2 inch body lift pucks for 4runner or truck (2-2" OD and 8 - 2.5" OD) http://www.4crawler.com/4x4/ForSale/...BodyLift.shtml - $40
http://tamor.us/members-rigs/albums/album167/100_0318.thumb.jpg
Large Isuzu power steering reservoir - $20
http://tamor.us/members-rigs/albums/album167/100_0342.thumb.jpg
Toyota side marker lights - $15
http://tamor.us/members-rigs/albums/album167/100_0314.thumb.jpg
Rear tail lights for a 4runner or truck (84-89)- $20
http://tamor.us/members-rigs/albums/album167/100_0316.thumb.jpg
Tow bar - $40
http://tamor.us/members-rigs/albums/album167/100_0333.thumb.jpg
more pics can be seen here http://tamor.us/members-rigs/album167
Eckert
07-10-2007, 06:27 PM
pic of the rear bumper and condition of the IFS parts?
CRaSHnBuRN
07-10-2007, 06:54 PM
IFS stuff was basically what I torched off. Most of it was in pretty good shape, and pretty much rust free. The 4runner was my daily driver before I started building it at christmas
here are all the pics I have at the moment
http://tamor.us/members-rigs/album167
CRaSHnBuRN
07-10-2007, 07:06 PM
added a few things
Eckert
07-10-2007, 09:31 PM
never mind on the rear. not quite what i had in mind. if you got the bumper ends, i will take the front bumper. do you still have the harness and bulbs for the front blinkers?
how do i give you the cash and put the bumper in my hands?
CRaSHnBuRN
07-11-2007, 07:24 AM
the little plastic pieces on the bumper? Yeah, those are still there. Where are you at? I should be going home (lexington) on the 20th to work on my stuff. I can either meet you in college station on sunday afternoon, or give the bumper to my girlfriend and you can get it from her sometime later in the week
as for the harness, I just unplugged the blinkers from the harness, since I didn't want to cut into my stock harness
CRaSHnBuRN
07-17-2007, 08:05 AM
come on people, buy something :flipoff2: I need the money for my 35 spline axleshaft fund
jerryg79
07-17-2007, 10:25 AM
come on people, by something :flipoff2:
be a little more specific as to what they are "by", and we'll know who you're talking about
CRaSHnBuRN
07-17-2007, 10:31 AM
be a little more specific as to what they are "by", and we'll know who you're talking about
:flipoff2:
eight
07-17-2007, 12:13 PM
I might become interested in the stubs if the price becomes low enough.
CRaSHnBuRN
07-17-2007, 12:25 PM
$50 for the pair is as low as I can go
redcagepatrol
07-17-2007, 02:01 PM
man - and I gave Kolpecky some of those 30 spline lock-out flanges...
agjohn02
07-17-2007, 02:06 PM
is the dodge tie rod similar length to a chevy? i may need to borrow it to move the jeep. is that doable?
CRaSHnBuRN
07-17-2007, 02:19 PM
is the dodge tie rod similar length to a chevy? i may need to borrow it to move the jeep. is that doable?
dodge D60s are around 2 inches narrower than chevy D60s, right? My guess is its shorter than what you need, but if you think it can work, yeah you can borrow it
agjohn02
07-17-2007, 02:29 PM
i just remembered i might have the stock one stashed under my table. ill check and let you know. thanks.
Sharpe
07-17-2007, 07:32 PM
Cox I think I have my stocker you can borrow.
CRaSHnBuRN
07-24-2007, 11:29 AM
I updated prices, added pics, and added a few things to the list
agjohn02
07-24-2007, 11:50 AM
ah, this reminds me. i found my tie rod under my table. thanks for the offers though guys.
someone buy chris' junk!
CheapJeep
07-24-2007, 12:19 PM
$50 for the drive flanges? I'll also take the u-bolt 60 yoke and 4.10 gears for spares.
sasquatch
07-24-2007, 12:24 PM
damnit i was going to get the gears, yoke, and carrier.
wanker :flipoff2:
CheapJeep
07-24-2007, 12:42 PM
You'd probably try to torch them like those springs I sold ya :flipoff2: :D
CRaSHnBuRN
07-24-2007, 01:18 PM
$50 for the drive flanges? I'll also take the u-bolt 60 yoke and 4.10 gears for spares.
How about $90 for all of it? That would be $60 for the flanges, $10 for the yoke, and $20 for the gears
CRaSHnBuRN
07-24-2007, 01:18 PM
damnit i was going to get the gears, yoke, and carrier.
wanker :flipoff2:
would you still want the carrier?
CRaSHnBuRN
08-06-2007, 03:14 PM
The hubs are sold, and a sale is pending on the flanges and locking hubs
stx4wheeler
08-06-2007, 05:30 PM
if you still got the diff covers ill still take them at some point, you should come to one of the tamor gatherings, and we can do the deed
CRaSHnBuRN
08-06-2007, 05:46 PM
if you still got the diff covers ill still take them at some point, you should come to one of the tamor gatherings, and we can do the deed
if we could do a tamor gathering a little closer to me, I'd be all over it, but it sucks to drive across houston. I'll bring the covers up with me next time I go home, and we can try to figure something out from there
stx4wheeler
08-06-2007, 08:37 PM
where in houston do you live
Eckert
08-06-2007, 08:48 PM
i *might* be going back up to CS in the next week and could pick up parts.
you should come to one of the tamor gatherings, and we can do the deed
atta boy!
CRaSHnBuRN
08-07-2007, 06:26 AM
where in houston do you live
Pearland
bcolman
08-07-2007, 12:40 PM
ill give you $5 for the dana 60 spring plates
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.