PDA

View Full Version : 302 valve adjustment?



JB
11-02-2002, 04:45 PM
I removed one of the heads from my 302 and am now putting everything back together. I installed the pushrods and am now tightening down the rockers to about 20 ft/lbs. Is there any way to adjust the valves? Some people tell me it is a non-adjustable valve train, others say I have to set them. What do I need to do?

I am unable to twist the pushrods once I tighten them to 20ft/lbs, but am able to turn them on the head that I did not remove. Is that OK?

Thanks

StevenAg03
11-03-2002, 12:50 AM
since they use bolts instead of studs, there is no need for adjustment. all you have to do is torque them down to 18-25 ft/lbs.

BigRedFord04
11-04-2002, 01:43 AM
i have a feeling i'll be referring back to this thread soon...see "Need Help"...:( :(

bigFAWKINranger
11-07-2002, 12:03 AM
Originally posted by BigRedFord04
i have a feeling i'll be referring back to this thread soon...see "Need Help"...:( :(
i'm calling wells racing for you tomorrow, and as i recall you wanted me to price having them do some minor porting and a 3* valve job.

BigRedFord04
11-07-2002, 12:21 AM
make sure you get the basic head rework price too...check for cracks, consistency, etc...and maybe need a couple of valves...