View Full Version : Dont need this stuff.
1 Drop YJ pitmen arm $25.00
1 Set of Chevy Dana 60 brake brackets $25.00 (pending)
1 Set of Chevy Dana 60 brake dust covers $10.00
2 YJ Front Drive shafts 1310UJ $50.00 ea
1 YJ rear Drive shaft with yoke for 231 1310UJ $50.00
TST Power Max Chip for a 05Dodge (needs one of the harnesses, can get it
From TST for about 80buck) $300.00
Gage pillar and gages for a 05dodge (Exhaust Temp, Fuel Pressure, and Boost Pressure) The gages are Pricol white face $100.00 (Pending)
1 Set of Chevy Dana 60 inner and outer shafts $100.00 (pending)
1 KP Dana 60 Steering arm stock $15.00
Picks are Here http://offroadrepublic.com/gallery2/main.php?g2_itemId=151918
Best way to get me is to call. 972-281-7106
colman
02-24-2008, 04:50 PM
i'll take the thick 4.10 set if you can get it to me here in bryan, i'm in no hurry
please tell me they are for low pinion
i think they are high pinions. it should not matter.
I may be coming down next weekend i will bring them.
colman
02-24-2008, 08:56 PM
low pinion and high pinion do matter. if it is low pinion then i can use it. what did the gears come out of?
Eckert
02-24-2008, 11:20 PM
pics of the gauges?
what about the banjo bolt, wiring, etc?
CheapJeep
02-24-2008, 11:37 PM
pics of the gauges?
what about the banjo bolt, wiring, etc?
That's a pretty good deal even if wiring/plumbing isn't included.
An idea of what they look like and pricing. http://www.dieselperformanceparts.com/products.cfm/startrow/21/mfg_id/2/es_id/5/y_id/0/pt_id/7/spt_id/41
BTW- Busa, you're pic link isn't working.
http://offroadrepublic.com/gallery2/main.php?g2_itemId=151918 no i dont have any wiring for the gages.
85cj7
02-24-2008, 11:59 PM
will the rear drive shaft yoke fit the rear output of a dana 300, i'm thinkin it will, if so wil you seperate from the d-shaft?
*now that i say this i know that the front yoke from an xj np231 will fit but i don't know about the yj, can anyone attest?
robertf03
02-25-2008, 12:15 AM
no, yj rear yoke is not what you need. its some odd spline and they are a slip shaft. YJ front isn't CV so that won't work either, but I don't see one listed
85cj7
02-25-2008, 12:28 AM
i'm always glad when flem posts up.thanks:gigem:
The rear yoke is from and advaced adapters slip yoke eleminator kit. I think it is like 30 spline. I did not have any problems getting a flang for a 1350 cv
4-Banger
02-25-2008, 02:18 AM
I could use the KC lights. Will you be at the 47 thing this weekend?
DRAGOONRANCH
02-25-2008, 02:43 AM
The chevy 60 shafts 35 spline?
Why is the sky blue? How ddep is the ocean? Are we there yet? :flipoff2:
The dana 60 shafts are 35s inners and 30s outers. Stock chevy shafts. I am planning on going to 47 sat. so if anyone needs anything now is the time.
DRAGOONRANCH
02-25-2008, 09:45 AM
wise guy huh???
DRAGOONRANCH
02-25-2008, 09:46 AM
The dana 60 shafts are 35s inners and 30s outers. Stock chevy shafts. I am planning on going to 47 sat. so if anyone needs anything now is the time.
Ok, nevermind then.
AggieTJ2007
02-26-2008, 07:32 PM
is the psc a TC style pump
I dont know. It is just a stock replacment pump.
robertf03
02-26-2008, 08:16 PM
Busa I need that pump!
AggieTJ2007
02-26-2008, 11:07 PM
take it flem don't need it
4-Banger
02-27-2008, 02:26 AM
*ignore this post*
DRAGOONRANCH
02-27-2008, 04:01 AM
I'll take it, flem don't need it
or
take it flem, I don't need it
:flipoff2:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.