good idea. i hadn't though of that. i need to measure the radius of the jd2 to see how a 180 bend would look.Quote:
Originally Posted by agjohn02
Printable View
good idea. i hadn't though of that. i need to measure the radius of the jd2 to see how a 180 bend would look.Quote:
Originally Posted by agjohn02
also cook you could take a pice of like 3 or 4 inch diameter pipe, and cut it in half and weld that to the frame, and or tube,from the frame to the top or halfway up and it probably wouldnt look to bad since it is round
I could not get my JD2 to make a perfect 180 degree bend when I was making my tranny crossmember. It would only go to like 175 degrees and then there were no more notches on the bar. I know it doesnt make a difference in this case but just for future reference...
I would think that a smaller degree bend (100-150???) bend would be just fine also, but I dont know what the radius of the die is so I don't know what it would look likeQuote:
Originally Posted by afroman006
the bed is pretty much finished
Looks peemp Cook, awesome work on the tailgate.
That thing gets the Fergalicious Seal of Approval. :gigem:Quote:
Originally Posted by RCook527
I would have gone with a vintage ford oval but looks pretty cool.
Looks good, now just tube out the cab...
i drove by last sat. the bed looks sweet
i like it
where are you going to put the spare? I think a spare, a hi lift, and some rock lights would finished it off.
show the driver side you pu-nana-jad, looks good man
Hmm, pu-nana-jad, me likes this word, you mind if I use it.
x2 on the other side, we wanna see what you did to the fuel neck.
name? somebody suggested the dirty sanchez. others?
papa smurf
Quote:
Originally Posted by RCook527
yeah, i saw it the other day at dexter. looks better than i pictured. me likes papa smurf... or the blue turd.
papa smurf
brue barrs
think of Mr. Miagi trying to say "Blue Balls" looks good.
a 427 with three dueces would be bad ass
Just put a diesel in and be done with it.
then i wouldn't have **** for hp :flipoff2:
i snapped an axle shaft last night leaving the meeting. 9s suck
oh snap!
Oh damn we were just talking about that last night too about how you wanted to do your axles before your motor...Quote:
Originally Posted by RCook527
Wait let me pull out the gay for you Cook, "And isn't it ironic... don't you think"
:flipoff2:
Well that sucks... Roadtrip to Louisiana for that truck?
it's like rain on your wedding day, it's the free ride, when you've already paid...Quote:
Originally Posted by FJAggie07
Ever notice that the stuff in that song really isn't that ironic, it's just stuff that sucks. Maybe it's ironic that the song sucks and so does she? That could be the real message there.
To keep it on topic an analogy:
Willie Nelson : Smoking Pot
Robert Cook : Breaking 9" axles
maybe you shouldn't hotrod on the street, i heard it snap
time for a 35 spline D70
oh oh i have one
better yet, give the sterling to cook, and the D70 to the guy I mentioned to you
heres pics of the **** that broke
Nice! Getting to be an expert changing out the 9" are we?
Oh, and I looked back and saw your post about building your current motor instead of going with a 427. I like that idea, makes alot more sense like you said. Let me know if you need contact info for stroker/motor kits, boring and honing, etc.
can do it blindfolded. probably going to get one tons first, since my 360 is able to constantly break the axles i have.
we need to make a trip to traders village in GP to get your sticker made.
i'm not so sure we'll make it out of there once we ask for the sticker
its TRADERS VILLAGE.... you can get anything you can imagine there
yea i know. bump, tint, electric scooters, cell phone covers, body kits for your f-150, small mexican children, anything you want
chiklets?