well it would be about $50-60 for the pump and the shaft. However, I am not sure about dodge axles. It has the funny arm on the driverside and the link, but no studs on the passengerside. Is this the right axle?
Printable View
well it would be about $50-60 for the pump and the shaft. However, I am not sure about dodge axles. It has the funny arm on the driverside and the link, but no studs on the passengerside. Is this the right axle?
It should be flat top both sides with the knuckles tapped. Is it an 81 or around that year? I didn't think it mattered as long as it was a dodge d44 passenger side drop?
Do you have a pulley puller? I have a cheby pump that was left at Bill's that I could go back and get. All I would need would be the pulley.
go to oreilys or advanced and do it there on the tableQuote:
Originally Posted by CheapJeep
when we changed cooks p/s pump, we used the pully puller at advanced, most parts stores usually will have one that they will let you use while you are there at the store
If he had a puller he could just get me the pulley instead of the whole pump which would save some money. If not I'll just see if I can find the reciept for the pump I left at Bill's and return it, though it was over 2 months ago when it was bought.
BTW- Sent the guy a pm regarding the shaft, we'll see what he says.
so why is the pump at bills if you paid for it, didnt plan on using it, why didnt you jsut take it back, or with you, think man it will save you lots of driving to h-town to take back or get a 30 dollar pump. jsut trying to help you out man
heres, somehting that, could help?Quote:
Originally Posted by stx4wheeler
***
Bwahahaha. :laughing: I had planned on using it. I just forgot to take it back whenever I picked up the Jeep. I have to go home to Conroe to get the Jeep sometime this week so going down to Houston isn't a big deal, not to mention my dad's office is only a couple blocks over from Bill's shop, so I can get a free lunch and see him. :gigem:
BTW- I don't know what day this week or weekend, probably friday afternoon, but if anyone wants to ride down with me to get my pile they're welcome to. I can insure free food. :haha:
thanks jimmy that girl that is turning around is smmmmoooking hot!!! i ain't got nun of them classs thingies i can maybe goo.
i get out of class at 12:20. i could lend a hand
Well Coop and I went and got my pile last night, so it's now here. The 218 crew has been extremely generous and allowed me to work on my junk there as well as lend a hand. Still need to get a couple fittings for the steel braided lines, but we did get new hardlines bent and in.
I just talked to Mark about the shaft and he explained that he bought the axle used and didn't know about it, he did tell me that he had replaced the long side many times due to running 40"s on it, but the short side never broke. But he IS getting me a new shortside for free since it was his deal. So all is well. He'll be at Katemcy the same weekend so I'll finally get to wheel with him.
sweetness about the shaft man, now you can use the broken one as a spare to get off the trail if it breaks.