Went with a Taylor tower on our boat, really nice product with an easy/straight forward install. They're located in New Mexico and really knowledgeable, check em' out.
Before
http://img.photobucket.com/albums/v4...Buildup019.jpg
After
http://img.photobucket.com/albums/v4...ildup036-1.jpg
http://img.photobucket.com/albums/v4...ildup038-1.jpg
Dead Bald Male Hooker head???
I fixed the engine cover while I was at it. :blackwink:
http://i47.photobucket.com/albums/f1...malehooker.jpg
Propane....riiiiiiight. Where are you getting this bald idea? That's me laying sideways trying to tighten the clamps on the water intake hose.
BWAHAHAHAHAH,
I finally realized how you were layin in the picture. I thought it was two different people for some strange reason...
Kick ass.
Got the rest of the engine buttoned up, fuel system hooked up and 5 gallons of gas in the tank. All the relays click, engine cranks, has spark, but the low pressure pump, that supplies the High pressure pump in the Fuel Control Cell, is no bueno por caca. Damn thing wanted to run but it wasn't to be tonight.
boooo....that sounds like $$$
Anybody recognize this pump as a factory part for any car? It says carter on it, but they wisely made the image small enough not to be able to get a part number off of it.
how much is it?
That guy advertises his tower business on craigslist all the time. I had checked out the Taylor towers, looks pretty good.
It's a $119 pump on marine sites. Skidim.com has one in their clearance section that they had on a motor for a couple hours that they are selling for $80 that still is under warranty. By the way, what the hell are you doing up still? Isn't it 2am where you're at?
I was watching the big 12 take the championship at the bar. Time for bed.
Figured it out. The high side pump flows 55gph at approximately 45psi, and the low pressure supply pump is approximately 5psi and 72gph. Turns out it's a universal marine Carter pump p/n P4070 avaliable at the Napa less than a block from the office for $90. Picked one up at lunch. Thanks for the help guys!
I do what i can!Quote:
Originally Posted by Fredo
Thanks Jerry...don't know what I'd do without ya! :flipoff2: