Printable View
hotpocket
shut up. You're delivering pizzas, right? Hardly lucrative in the first place, and you don't deliver pizzas in a new car (well at least if you have any sense and are paying for it yourself). I bet your income from that job is negative if you take mileage/wear and tear/depreciation of the car into account.
uglyotaQuote:
Originally Posted by uglyota
shut up. Don't you have credit card bills to be racking up???
I see his pizza delivery career, being like that movie Loverboy from the 80's, except there are alot more deliveries of "Large Sausage and Mushroom with a side of Frat House Gang Bangs" delivered.Quote:
Originally Posted by uglyota
:confused2 I'm in the black, baby!Quote:
Originally Posted by DRAGOONRANCH
This would be way too easy...Quote:
Originally Posted by uglyota
Must resisst, no "your mom" jokes... :flipoff3:Quote:
Originally Posted by FJAggie07
Now, back on topic.
http://i47.photobucket.com/albums/f1.../worthless.gif
what do you want pics of? I haven't changed anything.
well then maybe you should, or at least show us a pic of the fubared stub
i'll get out there tomorrow.
oh, you were right by the way, those tires make it sound like there is a cessna taking off next to me at 40mph
15-20 bucks an hour is a pretty good deal actually. and **** you! I'm just doing what I gotta do to get through college, so lay offQuote:
Originally Posted by uglyota
Please tell me this was drinking induced...Quote:
Originally Posted by Hot Pocket
New radiator put in and i just bought new axleshafts................should be here on thursday or friday. I'll be going to bvor this sunday
Checklist for things to do before gilmer
1. axleshaft
2. remove sheared bolt on driveshaft
3. Change axle fluids
4. pull apart both hubs and regrease them. They got cleaned out with brake cleaner at sb
5.Tighten tracbar
6.cut front fenders as they got fubared last weekend
7.change tranny fluid
8. add oil
9. change t-case fluid, god knows the last time it was changed
10. Lube every zurk fitting on the truck
11. Clean out interior
12. fix heater
13. weld up holes in fender (need a little help for this one)
14. put rear interior panels and speakers back in
15. Put a temporary deck in it so i will have tunes
16. buy some rubber boots
17. fix headlight and aux lights
19. shackles and reciever hitch
20. get a cooler
21. fill up with gas
I would fill the cooler also, preferably with adult beverages.
that can be done on the way
Your welcome to my shaft
*waits for corny joke
Is it the right one for my truck
oh and wow i will not dignify that response with a "corny joke"
Im pretty sure it is but you would need to check. I think the total length was right at 45 inches IIRC
well make sure
hey ****er is that in the ball park?Quote:
Originally Posted by TdmayfieldIV
thats not what she saidQuote:
Originally Posted by BroncoJo
You know what's sad? We all know Colman is sitting there with a **** eating grin on his face for coming up with that original and witty remark. :flipoff2:
........maybe......
no luck with eckert's shaft, it was too long.............
i got my headlight working, turns out the plug just came undone
This weekend i'll be greasing everything i can and i found a complete d44 by houston for $225 i might go pick that up. it has everything in it so i'll have spares for everything in the front end
Steven and Garrett will be working with me at my house over the weekend so hopefully we can get alot done on all of our trucks
newb wrenchfest!!!!
Good lord son!!!Quote:
Originally Posted by TdmayfieldIV
FTMFW!!!Quote:
Originally Posted by TdmayfieldIV
what the hell does that mean?Quote:
Originally Posted by Sparling
for the mother fawkin win, I think.Quote:
Originally Posted by bcolman
**** the mother ****ing world.Quote:
Originally Posted by FJAggie07
why so angry all the time?!?!:flipoff2:Quote:
Originally Posted by BroncoJo
Tyler stopped putting out!:flipoff2:Quote:
Originally Posted by FJAggie07
hey maybe ****ing the world makes me happy :flipoff2:
I got the new deck, rear interior panels, 6x9s and subs put back in today. i got some shafts from fullsizebronco, both sides for $50. They will be here on sunday, the guy's wife is driving them from lufkin for me.
Be very careful. She's going to give you the shaft!
got my shafts today. I am just going to replace the joint and put it in on tuesday. I have all the tools i need except for the spindle socket. I need to borrow that from someone:gigem:
its like $15 from horiellys, you are gonna need it often it seems like so go ahead and get one
i also agree on buying one. you can borrow mine if you need it.
so the shaft that i got sent is overall about 7/8"s too long. The splines are about 2" long. I was thinking about cutting about 1/2" off the inner and 3/8" off the stub so that it would sit correctly in the knuckle. What do you guys think? Should i do that or take 7/8ths off the inner?
did you order a new shaft and it is still to long? Where did you order it from and what part number?Quote:
Originally Posted by TdmayfieldIV
7/8's off the inner, if you chop off the stub your hubs won't go back together or find the right shaft.