back to bronco stuff. Hopefully during dead week i am gonna make a high steer arm.
also i am looking for some weld in nuts for my steering parts. anyone know where to get them at at good price at?
Printable View
back to bronco stuff. Hopefully during dead week i am gonna make a high steer arm.
also i am looking for some weld in nuts for my steering parts. anyone know where to get them at at good price at?
Never bought from any of these places but it might give you and idea. I think most people are using QA1's:
http://www.stockcarproducts.com/rodend.htm
Never mind i think you're looking for threaded ends
http://www.aa-mfg.com/pdshop/shop/category.asp go to nuts and spacers and to the 4 and 5th page on that site
http://www.polyperformance.com/shop/...&cat=86&page=1
hey you can find it on ebay!!
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
Hew doug i found some 1 in plate in mikes shop enough to make two arms u want one?
What size threaded inserts do you need?
Coleman Racing has them cheap:
http://www.colemanracing.com/section/index.htp?id=642
I have the inserts that brett posted above, PN 15589 and 15590, a pair of each. I ended up using TRE, so I dont need them. Never used, new in box.
i paid $24, put i am not in a hurry to get rid of them
I am not sure what size tubing i am gonna use yet. Most likely the biggest stuff i can use.
i found this on ebay to fix my rear brake problems seems like a pretty good deal to me cost 50 bucks shipped but still seems like a good deal.
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Not a bad price, but you won't have lifetime warranty, but i'm not sure o'reillys gives you lifetime anymore.
I thought you were getting rid of that axle and getting a 14 bolt? Didn't you spin a race in the bearing hub?
the race is kosher and i am gonna get jimmy to get me a deal to fix the seal surface so it will be good again. plus if i get a 14 bolt all i have to change is the brackets. and u have lifetime parts so that is good for me :gigem:Quote:
Originally Posted by Doug Krebs
well i got the rear brakes working i think i need to bleed them. Has anyone had any luck with those do it ur self bleeders? Also i am going to kinda quit working on this cause i am thinking of selling it and starting something new.
i have one of those do it yourself bleeders and i couldnt get it to work right... was a waist of 8$ if you ask me
I have one and it works great.
i have had two different kinds and the cheapest one worked the best
Quote:
Originally Posted by fbronco86
Karl's got one, I used it, worked fine as long as it comes with the right size attachment
Man I thought I needed to find a sucker to buy my old POS :flipoff2:Quote:
Originally Posted by fbronco86
If so, I want your tires.Quote:
Originally Posted by fbronco86
this project sucked so i am dumping it
I started to work on the little bronco today. I have been sand blasting the floor since the linear that was sprayed on the floor is peeling off. I think I might go back with my herculinear again it worked pretty well in my big bronco and was only 75 bucks to coat the floor. I also put a battery in it and fired it up. That thing runs like a champ. I made a few carb adjustments and she runs pretty good. I transmission even goes into gear.
Jerry I did not air up the tire yet.
EB running good? Take it to Gilmer and fix that real quick.
Quote:
Originally Posted by afroman006
Glimer is a great place to learn about your rig. I hit a few trees and came home and put fuel injection on my rig.
The truck runs pretty good for sitting in a field for 2 years or so. Its also running on 2 year old gas. :gigem:
Thats funny, after we went to Gilmer last Feb. Garret ended up putting fuel injection on his bronco too...wierd.
I am glad to hear it still runs good. I never did anything to the engine except change the fluids.
All the fluids looked pretty good. I am gonna changed them since they have been in there so long.Quote:
Originally Posted by Broncocustom
James do you know what the gears are in that truck? I can not find a tag on the diffs
robert i think you should get an EB
Why dont YOU get one since I already own 2 4x4's?Quote:
Originally Posted by william_ace
Why stop at 2? :confused2Quote:
Originally Posted by afroman006
4x4s are like potatoe chips, you can never have just one
. . . . and they both go crunch!
bc im gay and i like lifted 2wd's and a collection of parts to make it a 4x4
hmmm....deja vu :gigem:Quote:
Originally Posted by william_ace
I would like to add my own personal feelings about Broncos:
The 2 proudest moments of owning a Ford Bronco:
Number 2: when you buy the vehicle, and think this is going to be cool, V8, 4WD, I can lift it, get window tinting, tires, blah blah blah
Number 1: When you sell the giant steaming piece of pooh, laughing cause the new owner will see how you messed up the lift, window tinting, tires on someones mail box, broke a drive shaft in a Casino parking lot and some dudes lawn, etc......
1982 F150 BEST TRUCK EVER MADE!!!!!
that really is a great story karl,Quote:
Originally Posted by KrazyKarl02
I was watchin tv last night and I saw two EB's
One was on the OC ( I am gey and still watch that show )
The other was on OLN channel. The guy came out and said this is a 1966 ford bronco bad mofo.
Back to my little bronco
I think there is a cat in the power steering pump :gigem:
Well here are the before pics for this project
This should be a good indication to the gayness of EB's ;) You did self proclaim yourself gay however, so gay it up you flaming pole pumper! ;)Quote:
Originally Posted by fbronco86
So whats the deal with that chevy behind it in the first couple of pics? Is that a charlie truck wannabe back there too?
Quote:
Originally Posted by BMFScout
Please you scout guys are just as bad as the EB crowd. You and Fred are just as gey about scouts :flipoff2:
Quote:
Originally Posted by afroman006
Those are not my rides.
I edited some of the pics
Name the last time I saw a scout on TV, Whataburger commercial. In a movie, Desperado when Antonio Banderas and Selma whoever that hotass chick is ride off into the sunset.Quote:
Originally Posted by fbronco86
Name the last time I saw an EB on TV, OC or a commercial for VD. The last time I saw one in a movie, that gawdawful movie zoolander with that no-talent ass clown Ben Stiller as a MALE MODEL, dancing around it at the gas pump with a bunch of other MALE MODELS.
I'm just saying EB's have a gay following, as in man on man love gay, not the way the kingwood krew uses it as a verb/adjective replacement.
Quote:
Originally Posted by BMFScout
The VD commericial is sweet. I have not seen it on TV in awhile.
Behind the shop is were all projects that get delayed are stored or are going to be cashed in for money at the metal yard. Jason has 2 toyota's out there that he basically got for free that are parts donors. The olf five window chevy truck is my father-in-laws project. The 80's chevy next to the bronco is the engine donor for the old chevy.
does anyone know if busa's truck still has the rear axle and if he is still planning on selling it. I think I sent him a pm about it a month or so ago, but never got a reply