Does anyone want to buy the front dana 44? Last month everyone wanted it and now nobody seems to want it.
Printable View
Does anyone want to buy the front dana 44? Last month everyone wanted it and now nobody seems to want it.
I still want your 44 - let me rephrase - i will buy it, not just want it. I will PM you.
Seth
Seth, did you buy the D44? Is it still for sale?
Yeah - its mine.
I still want your 60/70...It's not doing anyone any good sitting out in that field and they'd look sweet under the Scout :D
Make me a good enough offer and the 60 an 70 are yours. Anything is for sale for the right price.
The axle is now gone, Thanks Seth for buying it.
Does anyone want to buy the np205 and t18. I know Brett wanted at one time but since I have not heard from him in along time I guess he found something else to use. I also have some reverse rotation D60 4.10 gears on an open carrier if anyone wants to buy them.
How much for the gears and carrier?
Make me an offer. The carrier is for 35 spline axle shafts. These are the gears that came out of my front D60.
What are the specs on them again? Gears, lockers, rebuit, hubs, etc...? Are the tires for sale as well...42x16.5x15, right? Any chance of a package deal?Quote:
Originally posted by Broncocustom
Make me a good enough offer and the 60 an 70 are yours. Anything is for sale for the right price.
Also, I've got a '79 RC HP Ford 60 and a 14 bolt rear if you'd be interested in a partial trade...4.10s in both.
The tires are gone, Cody is running them on his truck.
The rear axle is a D70 from a '85 F-250. Full floating 35 spline axle shafts, Drum Brakes, new 5.13 gears, Powrlok (this is a posi that is real tight and was in the axle when I bought it). New brake shoes, seals, brake lines, and all bearings.
The front axle is a RR D60 from a '88 F-350. The axle shafts are 35 spline inners and 30 spline outers. New u-joints, all bearings, all seals, rotors, one brake caliber, brake lines and brake pads. The steering is made using 1" sch 160 pipe with 3/4" heim joints. 5.13 gears and a full Detroit locker.
All the work was done to both axles the summer of 2000. The truck was driven around town a little and trailered to Lano river, San Antonio and Mason. So the parts have very little wear. The gears and locker were not cheap.
If I do part out that truck I will also have another np205 for sale that is connected to a c6 that was rebuilt in 1999 with a b&m shift kit. The tranny does not have that many miles on it either.
Is the 60 a kingpin axle?
yes it is a king pin axle. The axle tubes are also some of the thickest tubes made for the front d60. Also I forgot that the rear brake cylinders were also new along with the brake hardware.
$2000 for the pair. If that's cool, are you interested in my 60 or 14 bolt?
Hey James - I forgot to tell you - I might buy those whiz bang axle shafts......eventually. How much are you asking for them and how much are they new? Thanks again.
seth, you lazyass...it was on the 1st page. :flipoff2:Quote:
Originally posted by Broncocustom
I want $400 for the Warn shafts. They are worth around $550. I sold a second set just like these for $420 earlier this year to a guy in Nashville who drove down to pick them up.
i just want to know why they werent included in the original package deal :D
now eight - dont go ****in up my package deal im gonna buy - it must be soemthing rigged anyway right
Sorry I have not got back sooner but the dial-up at the hotel sucks this week.
Seth I sold the Warn shafts last year but forgot to note it on here.
Andy, I need to think about it. I really do not want to sell them just in case I want to build something down the road but your offer is good and might make me change my mind. I also need to discuss it with Amie.
ANDY, James couldn't get to a computer so he asked me to tell you that he'll take your deal on the Axles. Amie is in the Hospital and he needs the money.
hey james if you get this i want the t18 205 combo we talked about this. thanks mike
Andy the axles are yours. Call me to figure out when and how to get them. Cody told me this last weekend that he does not plan on using the 42" tires anymore and was thinking about selling them, so if you are interested let me know.
Mike the tranny and tcase are yours. Call me to talk about it.
Here is other stuff I need to sell:
-5 - 16.5"x9.75" white wagon wheels that are 8 lug
-C6 rebuilt a couple a years ago but has at most 3000 miles on it.
-np-205 that is currently mated to the c6
-2 -5 point simpson race harness'
-Holley electric fuel pump but I do not remember what it is exactly
-4.10 RR d60 gears used
-Stock d60 35 spline carrier
Make offers on stuff. If you have anyquestion call my cell 713-254-5279
Is the output for the tcase on the drivers side?
is there a carrier split in the D60? if so, which ratios is yours good for? i might be needing one soon for a rear 60.
how much you want for the wagon wheels and the harnesses?
T-case has drivers side output.
I had not thought about prices since I wwas not planning on selling this stuff. I think the wheels were $50 each new.
I think this carrier only goes up to 4.10 gears. I think for 4.56 gears you need a different carrier but I do not know for sure.
The harness's were $100 each. Make an offer.
alright then it should work for me. I will give you a call.
Here are a couple things I have placed on ebay. I will be adding more in the next few days.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425945106
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425944071
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425945720
do you still have any elec. fans on the bronco?
Here is the stuff I want to sell:
2- ford power steering boxes
2- Tom woods cv drive shafts (I will find out the length this weekend) each driveshaft cost $400 new
2- stock bronco cv driveshafts
-c6/np205
-t18/np205 (might already been sold)
- 5 white spoke 16.5"x9.75" 8 lug wagon wheels from 4wp
2- simpson 5 point harness's
-Holly red top electric fuel pump
-canister style performance fuel filter
-york a/c compressor
-pressure regultator/ pressure relief/ filter from on board air system
-400 ford engine - whole or any needed parts
- brand new set of auto meter classics gauges, still in box. bought for bronco but never used, cost $300 new
- the lugnut set on ebay
- d60 4.10 gears on ebay
-d60 carrier on ebay
2 - ford 9" open carriers for 31 spline axles also have most the parts to build 2 ford 9" axles
3- electric fans from the bronco
Make me offers on this stuff. I plan on taking apart the bronco this weekend and start taking pictures of parts so that I can post them on ebay.
what size cv is on the driveshaft? i could be very interested in those and the fans and maybe the york. i will take a look at it after work and see what i could use.
The cv's are only 1330's. I did not want to change the yokes on the t-case when I was building the truck. when you go look at the fans there are 2 on the radiator and 1 on the fuel cell housing in the back.
how much ya lookin to get for them 9", and what is the wms-wms?
i am interested in the driveshafts and one fan. but i'm not totally for sure i can use them yet but i would like to try.
The 5 point harness' are now sold.
I have placed a few more items on ebay.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426077045
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426093614
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426095279
Mike do you still want that t18/np205? I can bring it to anderson this weekend if you want.
yes i still want it. i have been a little busy with school and crap. But anyway i am in houston this weekend. you can call me at 281-352-4653