I will let you know on the prices tomarrow.
Let me give them a call tomarrow when they are still open
Printable View
I will let you know on the prices tomarrow.
Let me give them a call tomarrow when they are still open
Let me know what the 1.5 x .25 is too, might need a little too. Mark me down for 20' of the 1.25 DOM also
ok
**** 1.75 is almost $2 a foot cheaper than 2". If I ultimately buy 150' of tube that much savings would pay off a new die for my bender...cause I have a 2" die but no 1.75". Hmmmmm...
When are you making this order?
whenever people make up their minds on what they want. If I get definetive answers and some money I will place the order
how much would I need for a tie rod and a drag link on a d60? 8 foot? Like I said before, I'll take 100 ft of the 1.75x.120 dom and whatever I need for steering
ok we can split the steering stuff that way I can get a length
i want in on steering stuff too, but a different size. ill let you know when sharpe gets back to me.
i would get 8 in case you screw something up, or the spare piece makes a nice people beater or ghetto hammer, but 6 would prolly be enough unless you mess something up. im thinking me and clarke used around five or five and a half, i can measure when i get back home today.Quote:
Originally Posted by CRaSHnBuRN
for both the drag link and tie rod? Granted I haven't measured it, but 5.5 seems really short. Either way, I can always find uses for the extra stuff. Myabe if the length is long enough I'll have enough for an spare tie rod. That sounds good to me creighton. When will you want the money?
sorry thought you only meant for tie rod, tie-rod was in that 5 foot range, and my draglink(with crossover) was prolly close to 4ft i can measure when i get home.
clarke went with chevy tre's, and so his draglink is considerably smaller(2 or at the most 3ft), plus his power steering gear box is mounted inside the frame where as mine is outboard of the frame.
okay, that sounds right then. Had me really confused for a minute cause even my little narrow toy axles needed nearly 8 ft of stuff
I actually need some tubing for steering as well, but I think that 1.5" might be a little large.
I'm thinking I need some 1.25 x .250, they carry that Creighton?
steering is not something you want to go small on, plus most people go with 1.5 that cause it is the norm so the inserts are cheaper for it. With 1.25 you would prolly not have enough room for an insert, and also may not have enough room to just tap the tube and it be strong enough.
yeah, get the 1.5 and some inserts. Perhaps we can get a group order on them together as well. The nice thing with the 1.5 is you can sleeve it with some of the other DOM we're getting if you need the thickness and have the room for it
fj80 ends fit perfectly in 1.25x.250 tubing with a tap, but you're right, it might be wise to have other options, even if i do end up with the fj80 tres.Quote:
Originally Posted by stx4wheeler
have you priced the cost of that tap. I'm betting after the cost of the tap and tubin, you would be better off buying it from a vendor ready made. And since you running a d44 anyway, why not run 1 ton TREs or hiems?
FJ-80 tre's are "1 ton". I'm not going heim, since I've bought my arms, I've decided to go tre, so I need to find a new set of arms and unload the ones I have.Quote:
Originally Posted by CRaSHnBuRN
i don't see why a tierod would need heims. it doesn't misalign
Ok, here is my list.
200' - 1.75x.120 DOM
20' - 1.25x.120 DOM
20' - 1.50x.250 DOM
I would be willing to split the 1.5 with someone if they need a half stick.
creighton, see if they have 1.5"x.375" wall and let me know a price. thanks.
Quote:
Originally Posted by DRAGOONRANCH
I'll split it with you unless feller wants to split a piece with me.
it doesn't really matter who splits with who, as long as we have an even number of people needing it
that's what I was getting at. seemed like just you, me, and ed wanted it, so if he doesnt mind having 20, then we can split another stick
yeah, I didn't get a chance to call today, but I will get everything together pretty soon. I already got an account set up with the steel mill and a "company" that is buying the tube. Should be a great time
They think I build off-road rigs for a living. Boy do I wish
don't forget creighton, so we have 4 people to split 2 sticks right nowQuote:
Originally Posted by JeepPhisherman
i lost my keyboard
edit: OI fouind it
I will fiture thes out when I am sober
so, did you sober up?
bueller
bueller.....
whatchore paypal be?
Yeah I will get you my paypal, I have been really busy lately but I am getting things together
i could use 10' of the 1.25 x .120(if i have to to make the order work i will take 20') and 40' of the 1.75 x .120. send me a pm to tell me what your paypal is and i will hit you up, this is assuming you haven't made the order yet
yeah I haven't made an order yet,
great, just let me know how much i owe you.
Ok Prices are as follows
1.75x.120 DOM $3.00
1.25x.120 DOM $4.00
1.75x.120 4130 $5.05
1.75x.095 4130 $5.05
1.25x.120 Hrew $2.05
1.50x.250 DOM $6.00
1.50x.375 DOM $7.30
2.00x.095 DOM $4.50
2.00x.120 DOM $5.00
I am going to place order on friday send money by Friday via paypal or you won't be a part of the order
anybody have a 1.25" die i can borrow in the future?
any of you steering guys wanna split a stick of the 1.5"x.375" with me instead of getting the thin stuff with weld ins?
ill split it with you john
So do you just have that tapped for the ends/heims?Quote:
Originally Posted by agjohn02
what size ends are you going with john? 1.25 would be a huge hiem for steering, or do they make that size of TRE, and if so where do you get them and what are thier cost? I might be interested in this approach, and maybe tossing in on a tap if the ends if the price isn't to high overall