almost 4x4 (my green)

Printable View

Show 40 post(s) from this thread on one page

02-10-2008, 04:49 AM
william_ace

moved the rear axle back 3" today. it was about .5" or an inch to far but oh well. i like it. also installed my light bar

http://www.supermotors.net/getfile/6...e/dsc01480.jpg

http://www.supermotors.net/getfile/6...e/dsc01481.jpg

before
http://www.supermotors.net/getfile/6...e/dsc01471.jpg

after
http://www.supermotors.net/getfile/6...e/dsc01482.jpg
02-10-2008, 06:14 AM
DRAGOONRANCH

looks good.
08-20-2008, 07:34 PM
william_ace

if anyone is bored im workin on the truck. installing new arms and coils and buckets and shock mounts and shocks. call me at 2103865708 if you wanna come by
08-21-2008, 12:59 PM
william_ace

workin on it again for anyone who wants to come lend a hand or just watch or drink some beer
08-23-2008, 04:07 PM
william_ace

pics soon but i got my new extended radius arms in, new coils, buckets, shock mounts shocks, front axle, steering, trac bar and track bar mount in its way to tall. the body lift needs to come off soon
08-25-2008, 08:43 PM
william_ace

ok progress. still not driving but very close. this last week i bought a new front axle and installed it. at the same time i took out the stock coil buckets used the 78/9 style with f250 shock mounts, james duff arms and superflex 6" coils. ok enough talk.....

right before the start
http://www.supermotors.net/getfile/6...e/dsc01557.jpg

http://www.supermotors.net/getfile/6...e/dsc01558.jpg

tearing it down
http://www.supermotors.net/getfile/6...e/dsc01562.jpg

http://www.supermotors.net/getfile/6...e/dsc01566.jpg

making the coil buckets work
http://www.supermotors.net/getfile/6...e/dsc01568.jpg

http://www.supermotors.net/getfile/6...e/dsc01571.jpg

buckets installed
http://www.supermotors.net/getfile/6...e/dsc01574.jpg

drivers side bucket where hopper made an awesome tool to get back there and hld the nut in place. the tool will stay there forever
http://www.supermotors.net/getfile/6...e/dsc01575.jpg

home made coil straps
http://www.supermotors.net/getfile/6...e/dsc01576.jpg
08-25-2008, 08:43 PM
william_ace

big ass snake we found in the shop
http://www.supermotors.net/getfile/6...e/dsc01588.jpg

http://www.supermotors.net/getfile/6...e/dsc01591.jpg

arms being bolted on
http://www.supermotors.net/getfile/6...e/dsc01596.jpg

coils
http://www.supermotors.net/getfile/6...e/dsc01599.jpg

sitting on its own weight
http://www.supermotors.net/getfile/6...e/dsc01600.jpg

new shocks bilstein 5150s
http://www.supermotors.net/getfile/6...e/dsc01603.jpg

http://www.supermotors.net/getfile/6...e/dsc01616.jpg

still have alot more to do but this gets me a shload closer
08-25-2008, 08:49 PM
85cj7

Its a texas rat snake or prairie kingsnake. hard to tell from the pics. Most likely a rat. Oh sorry, good work too.
08-25-2008, 09:02 PM
william_ace

yeah it was a rat snake, we didnt kill it because we have a ton of rats in the shop
08-25-2008, 09:45 PM
BroncoJo

nice work and all but what the **** could you not get the rest of me in that snake pic. that **** will probably never happen again.
08-25-2008, 10:18 PM
william_ace

1 Attachment(s)

here you go fag
08-26-2008, 07:11 AM
JeepPhisherman

I have some 5150's I could have sold you, punk.
08-28-2008, 01:39 PM
davido

I dig those wheels on the F-series. Fun.
09-03-2008, 05:12 PM
william_ace

got the sky flip installed, track bar mount welded and aligned
thanks for welding it for me travis

http://www.supermotors.net/getfile/6...e/dsc01661.jpg

http://www.supermotors.net/getfile/6...e/dsc01663.jpg

http://www.supermotors.net/getfile/6...e/dsc01662.jpg

http://www.supermotors.net/getfile/6...e/dsc01660.jpg
09-03-2008, 05:34 PM
StevenAg03

you planning on lowering it at all?
09-03-2008, 05:39 PM
Seth

nice, what front spings are those? Judging by the clearance between diff and crossmember, that sucker is substantially taller than mine. You should bring it tonight, i will be there in mine. We can see which one everyone likes better, and then i will start mine up :flipoff2:
09-03-2008, 05:57 PM
william_ace

Quote:

Originally Posted by StevenAg03

you planning on lowering it at all?

i will probably take off the body lift sooner than later

and seth, mine does run thank you very much. it just does not drive...... yet
09-03-2008, 07:07 PM
Seth

I know it runs, I was referring to the straght 6 vs 351, seriously, looking good.
09-03-2008, 07:28 PM
william_ace

ahh i see now, and i hate you for it
09-03-2008, 08:06 PM
RCcola55

why not just raise the coil buckets an inch or two
09-03-2008, 08:09 PM
JB

needs 42s
09-03-2008, 11:14 PM
DRAGOONRANCH

with that much lift, you could clear fowtyfoes with very little trimmin'. ;)
09-03-2008, 11:21 PM
william_ace

Quote:

Originally Posted by DRAGOONRANCH

with that much lift, you could clear fowtyfoes with very little trimmin'. ;)

i really could, but i dont think my 300 would like it very much or the 44

the truck really needs to be a short bed
09-03-2008, 11:22 PM
BroncoJo

Quote:

Originally Posted by william_ace

the truck really needs to be a short bed

How fawking long have i been saying this?
09-03-2008, 11:35 PM
Eckert

Quote:

Originally Posted by BroncoJo

How fawking long have i been saying this?

its a mute point considering what the truck is.
09-03-2008, 11:37 PM
william_ace

Quote:

Originally Posted by Eckert

its a mute point considering what the truck is.

thanks
09-03-2008, 11:40 PM
DRAGOONRANCH

Quote:

Originally Posted by BroncoJo

How fawking long have i been saying this?

Quote:

Originally Posted by Eckert

its a mute point considering what the truck is.

Quote:

Originally Posted by william_ace

thanks

A good sawzall and a hundred bucks in JB Weld and "Shebang!!!", you got yourself a shortbed. ;)
09-03-2008, 11:41 PM
DRAGOONRANCH

Quote:

Originally Posted by william_ace

or the 44

If my 10 bolt could handle them with a 350 turning em, you will be just fine. :D
09-03-2008, 11:47 PM
william_ace

true story there, find me some and i'll put them on
09-04-2008, 01:01 AM
DRAGOONRANCH

:gigem:
09-04-2008, 01:44 AM
Seth

moot point gentlemen, moot. mute equals stereo equipment and jokes of questionable taste, but not humor.
09-04-2008, 06:58 AM
JeepPhisherman

Quote:

Originally Posted by Seth

moot point gentlemen, moot. mute equals stereo equipment and jokes of questionable taste, but not humor.

I thought it was a "moo point," you know, like a cow's opinion?
09-04-2008, 07:40 AM
DRAGOONRANCH

Quote:

Originally Posted by JeepPhisherman

I thought it was a "moo point," you know, like a cow's opinion?

That sounds like some 'straight outa the carolinas redneck' **** right there. :flipoff2:
09-04-2008, 08:06 AM
Reckless

Quote:

Originally Posted by DRAGOONRANCH

That sounds like some 'straight outa the carolinas redneck' **** right there. :flipoff2:

Na, thats just what happens when ya eat lead paint chips most of your life.:flipoff3:
09-04-2008, 08:14 AM
JeepPhisherman

Quote:

Originally Posted by DRAGOONRANCH

That sounds like some 'straight outa the carolinas redneck' **** right there. :flipoff2:

I guess I'm the only one with a gf who owns most of the Friends DVDs.
09-04-2008, 08:23 AM
bburris

No, but you're the only one that watches them with their SO. :flipoff2:
09-04-2008, 08:27 AM
Fredo

So you're saying you watch them all by yourself Brett?
09-04-2008, 09:02 AM
DRAGOONRANCH

Quote:

Originally Posted by Reckless

Na, thats just what happens when ya eat lead paint chips most of your life.:flipoff3:

zing!

Quote:

Originally Posted by JeepPhisherman

I guess I'm the only one with a gf who owns most of the Friends DVDs.

:rainbow:

Quote:

Originally Posted by bburris

No, but you're the only one that watches them with their SO. :flipoff2:

zing!

Quote:

Originally Posted by Fredo

So you're saying you watch them all by yourself Brett?

zing!

:D
09-04-2008, 09:52 AM
JeepPhisherman

I watch purely for Jennifer Aniston's and Courteney Cox's nipples. Must've been a cold set.
09-04-2008, 10:02 AM
DRAGOONRANCH

marbles. ;)

Show 40 post(s) from this thread on one page