i thought the shafts were only free replacement with stock u joints?
Printable View
i thought the shafts were only free replacement with stock u joints?
they told me that if i could break these shafts they would replace them... nooone has yet and they run them on many comp rigs
cool deal
I got in my Fab Fours dana60 diff cover... it is one bad dood
I also got in my 3-stick shifter for the doubler... looks like it is gonna take a little work to install
that cover looks good.
they make one for a 44 yet?
graciasQuote:
Originally Posted by Matt Conlee
Yes, the triple stick takes some figuring. It took me a 6 pack to get the shifters connected and lined up how I wanted them. ;)Quote:
Originally Posted by Shaggy
the fun part is i have to do it with the case already bolted in and hardly any clearance... there is no way i want to take it down and have to deal with lifting it back up again
cut a very large hole in the floor, and put sticks on then weld said pieve back in, or leave it open for air conditioning, or a good beer can dispenser. :gigem:
Holes in the floor suck, stuff that shouldnt fall out does. Being able to see your tranny crossmember is nice though.
expanded metal
worst idea ever, i was joking about it, well at least the not putting it back in, expanded metal will jsut get you wet,muddy, nasty, and cold=no buenoQuote:
Originally Posted by Rcook527
unless you mud bog or submarine your crap. i dont see how anything would get up in there if you drove at a reasonable speed.
shouldnt have taken your heater out if you didnt want to be cold :flipoff2:
Expanded metal is the way I am going in the Beast. There was already a huge hole of rust, so we torched it out and gonna place some back in. Tryin to look out the bowties window at the tires is a *****. Gonna help fix that by scrapin the 11.50 38's and goin with som 20.5 44's or bigger if I can locate some portal axles. The hole let in a little mud at Alto, but gonna fix that with a heavy piece of trailer mat for a removeable floor board. Hell anything that will keep the big beast shiny side up and rubber side down will help. :beer: