http://i736.photobucket.com/albums/x...mperdesign.png
Also planning a bumper
Going to get it milled out of solid titanium. That's why I made a cad drawing.
Printable View
http://i736.photobucket.com/albums/x...mperdesign.png
Also planning a bumper
Going to get it milled out of solid titanium. That's why I made a cad drawing.
Titanium... Pshhh. Unobtanium is where it's at
Hitch pin hole behind or in front of bumper?
behind. With the shackles there, i won't need to use that hitch much, unless you break your dodge at alto and I have to tow it home.
Please tell me that second part is a joke. I'm not current on titanium prices, but I'm fairly sure that would cost more than the truck.Quote:
Originally Posted by TdmayfieldIV
its a joke
Sometimes I wonder with you guys, so figured I'd check.
http://i736.photobucket.com/albums/x...V/IMAG0186.jpg
finally broke down and bought one of these. fawking $40
http://i736.photobucket.com/albums/x...IMAG0182-1.jpg
Took this toolbox I bought from blankenship and decided it needed a highlift mount.
I put the bolts through the part which is 3/16
http://i736.photobucket.com/albums/x...V/IMAG0184.jpg
http://i736.photobucket.com/albums/x...IMAG0185-1.jpg
The box turned out well Tommy!
Returned this for gas moneyQuote:
Originally Posted by TdmayfieldIV
I don't want my stupid rock lights anymore. I want these.
http://www.visionxwholesale.com/prod...Light-Kit.html
Haha we use to by those on our four-wheelers back in my crosby muddin days
this is real easy, i did it in about 2 hours while taking my time and drinking a few cold ones
Yup, so easy a TumTum can do it.
Tummy why don't you go ahead and weld your rear end untill you get money for gears/lockers
Its a limited slip. I am going to round rock next weekend to pick up a set of 5:13 gears from craigslist for $200 with bearings and a carrier. Then to huntsville to pick up an open rear end from a 10.5.
I'm going to pick up tube next week for the cage too.
let me know when you buy tube and I'll buy some with you so we can get the price lower
mkae sure there isnt a ratio break or you might run into an issue. Also what about gears for the front?Quote:
Originally Posted by TdmayfieldIV
He's going to pick up the front gears from craigslist and needs to order rear gears for the open carrier he will pick up in huntsvilleQuote:
Originally Posted by RCcola55
According to Kevin:
http://www.fullsizebronco.com/forum/...ad.php?t=52125
collecting roll cage photos
http://www.pirate4x4.com/forum/attac...1&d=1288273265
http://i613.photobucket.com/albums/t.../findstuff.jpg
http://i613.photobucket.com/albums/t...llicorally.jpg
http://www.pirate4x4.com/forum/attac...1&d=1288273265
https://lh3.googleusercontent.com/-M...2/IMAG0578.jpg
https://lh5.googleusercontent.com/-E...0/IMAG0582.jpg
https://lh5.googleusercontent.com/-J...0/IMAG0584.jpg
I picked up some 5:13's for my bronco today. Dana 60 reverse rotation 5:13.
I got them for a pretty good deal but the more I look at them the more I don't think they're Thick cut. I can't imagine there being many thin gears for dana 60's out there since the break is at 4:10.
Anyway I look on precision gear's website and it doesn't give any measurements for the thick cut gears. Google can't find any thickness measurements to find out if they are thick or thin.
According to the pictures I look at they aren't thick cut.
http://i736.photobucket.com/albums/x...V/IMAG0242.jpg
http://i736.photobucket.com/albums/x...V/IMAG0243.jpg
outside is 1.28
http://i736.photobucket.com/albums/x...g?t=1319864463
middle is 1.35
http://i736.photobucket.com/albums/x...g?t=1319864417
inside is 1.47
http://i736.photobucket.com/albums/x...g?t=1319864407
The first couple pictures do not look like 60 thick gears, they look like normal ones. Call randys and ask them to measure them for you. You can get a spacer for the thin gears that makes up the difference, but that is pretty janky.
Also, how long have those gears been sitting uncovered the ring looks like it sat outside for a while. Im sure it will be fine, but make sure and check it for any pitting or anything. Also, if you need them I have a set of setup bearings for the 60 that you can borrow and it will make it much easier to get a good setup.
According to precision gear they are thick.
My old exhaust kept getting in the way and bashing in my fuel tank so I cut it off and put a glasspack on it. They're alot quieter than I thought when you open it up. At Idle its about how I expected.
Mufflers are for pussies! :flipoff3:
They require a break in period. Did you get it hot then shove a water hose down the tail pipe?
So are half ton axles.Quote:
Originally Posted by Hot Pocket
http://www.freeautomechanic.com/ckp-...on-sensor.html
here for safe keeping
**** this ****. I am done with tbi. Bought me some propane.
Dual fuel ftw.
http://i975.photobucket.com/albums/a...v202009008.jpg
now that was a good investment.
well done tum tum
Where did you get it from if you don't mind me askin? Let me know if you need to borrow a couple propane tanks for a trip or something.
ill take all your tbi crap.....
Ok You can purchase everything from me.
Tbi with all sensors, icm, ecm, fuel pump and wiring harness. pm me an offer.
wanted thread on tx4x4
Wow! Enjoy not having any power
smh.
Been doing it for a year.Quote:
Originally Posted by RCcola55
Enjoy tuning something you have no clue how it works.
He's been doing that for over a year as well. :flipoff2: