I really need the spindles though, backing plates are pretty easy to find, but spindles are either on an axle or non-existent. I'm going to get new rotors, calipers, bearings and warn hubs anyways. Thanks though.
Printable View
I really need the spindles though, backing plates are pretty easy to find, but spindles are either on an axle or non-existent. I'm going to get new rotors, calipers, bearings and warn hubs anyways. Thanks though.
I need a super cheap pistol grip for an AR in CS.
Will you die without one?Quote:
Originally Posted by Sparling
I just don't feel like buying one to cut up.Quote:
Originally Posted by BroncoJo
I have a stock A2 grip but I'm not in BCS.
ive got an extra. Just txt me this afternoon
Standard bronco for your 5 speed swap
http://collegestation.craigslist.org...252367806.html
or here
http://houston.craigslist.org/cto/2234830120.html
I already ordered parts for my E4OD. I'm just looking for 8 lug 10 bolt stuff and doors. I wouldn't buy a whole vehicle unless it had a ZF in it. Travis when are you getting your welder back? I want to make sliders.
There are chingoes of these at Gordons.Quote:
Originally Posted by Sparling
Buy the truck and sell what you don't need to recover costs...Quote:
Originally Posted by Sparling
There is a zf on craigslist austin
I've been too lazy to go out there. I figured somebody would have some laying around eventually. Carsten might sell me his cheap.Quote:
Originally Posted by JB
The 5 speed train has left until my 5.0 blows up then I'll see about finding a 460 and 5 speed combo to put in.Quote:
Originally Posted by Shaggy
Edit: just called gordons, they want 75 bucks for a stripped door. **** that.
Did you sound like you had all of your teeth when you called? And did you enunciate? If so, there's your problem.Quote:
Originally Posted by Sparling
$75 isnt bad dude.
I know it's not bad, but people part these things out all the time, there's no reason to pay that much for something that I don't really need.Quote:
Originally Posted by RCcola55
Maybe you should just buy this truck, it's GREAT running and a gas saver
http://houston.craigslist.org/cto/2257722421.html
Chevy 1/2 ton 44 spindles and outer shafts
What do you not need?
What I need is 3/4 ton backing plates, rotors, and calipers, and 1/2 ton spindles and bearings. I know 3/4 ton spindles have bigger bearings but I can use the warn lock outs I have now with half ton spindles. And half ton outer axle shafts.
(2) 16.5" rims with 5x5.5 bolt pattern style or width doesn't matter.
talk to karl
hahaQuote:
Originally Posted by bcolman
Oh, I got 5 of those rims, with tires, cheap!Quote:
Originally Posted by Sparling
I don't need tires, how much? I'll probably take 3 if they're cheap.
I don't think they are what you are looking for, they are some 16.5" tires that I cut the center out of and welded a 3/8" plate with the 5 on 5.5 pattern in it. They are great for a trail rig, but I would not drive on the street with them. I have done 45 mph with em!Quote:
Originally Posted by Sparling
Yeah, I'm looking for some cheap steel rims to use on the street.
The cheapest I found when I was looking were from that Company in California, I think they are called stockton wheel.
A few days late on that one.
http://www.stocktonwheel.com/index.php
A cylinder for a 250 CID Ford Straight 6
I don't really need it but a 250 long block wouldn't be bad either.
Just one cylinder? A sleeve?
I meant a cylinder head
Just seeing if anybody has any of the stuff I need to finish my AR. Stuff I need:
Bolt assembly (not the carrier)
Low profile clamp on gas block
Stock (got one but it feels more suited to an airsoft gun)
Carbine length handguard (cheap)
Anybody have a set of d60 lock outs sitting around that they'd let go for cheap?
If you are looking for 30 spline stock stuff, I think I have some. I will have to check. You know the lockout on old TTB F250's are the same as Dana 60's right?
Yes. It's too hot to go to pick and pull. I have a super duty lockout with bad bearings on one side and an obs lockout that's all scratched up on the other. I want a nice looking/working set.
Yeah, if you want a guaranteed working set, I'll put them in a box and **** in it, then I will guarantee there is a piece of **** in that box.
Only if that service doesn't cost extra
Sparling does like free ****....