I traded Cox some parts for some welding so the wheels are all done and ready for paint and mounting. Thanks alot.
Printable View
I traded Cox some parts for some welding so the wheels are all done and ready for paint and mounting. Thanks alot.
Got this in the mail today. It is for my F150. Due to the hidden style design, you have to pop the hood to hook up the controller, which is kinda a pain.
The panel is a little bigger than I expected, but it really is of nice quality. I am going to mount it to the left of the column and a little bit down, so it wont be to obvious.
..
http://www.supermotors.net/getfile/5...e/img_0514.jpg
http://www.supermotors.net/getfile/5...e/img_0515.jpg
http://www.supermotors.net/getfile/5...e/img_0516.jpg
I went with blue "metal speck" paint. It matches fairly well, but I havent seen them in the daylight yet. Mounting this ****ers is hard work. The overall combo is almost 150lbs.
looks b!tchin
The hole for the valve stem didnt feck up the ballancing?
from the run to 47 last sunday...
Balancing? No balancing on this rig....I ran it up to 30-40mph, and yeah it might shake a little bit, but I am not trying to drive this thing expcept onto the trailerQuote:
Originally Posted by afroman006
A front bumper/winch and Redeck ram are next on the list, but hte new trailer put a hold on that for a while. We are planning on the Halloween run at Shiloh on Oct. 20 though.
If anything it might help. You should see all the weights, courtesy of discount's free rotate and balance :D , on my wheels and they're still out of balance. Every now and then they'll wobble a tad at around 65-70 but not bad.Quote:
Originally Posted by afroman006
The gray and blue on the wheels looks sweet :cool:
those look bangin'. i missed the post when you first got them done. been wondering what was keeping you.
you should see all of the weights on the inside of my wheels, one of them has almost 1.5 lbs on the inside of it
but they didn't vibrate at all at 75/80 mph
are you running an internal beadlock. i can't decide whether i want to cut down the magnesium ones or get pvc ones fpr my h1's
I am running the inserts from USA 6x6. They are plastic. WHeeled them hard this weekend at 8psi. and never had a problem.Quote:
Originally Posted by colman
If you're worried about the beadlock then your tires aren't big enough. ;)