yeah, the u-bolt kit I got had 5/8 studs, but those didn't work with my D60
Printable View
yeah, the u-bolt kit I got had 5/8 studs, but those didn't work with my D60
Just go buy some high grade all-thread, thats what I did. Chevies are indeed 5/8.
thats basically what I meant when I said studs, but I just wanted to check on the size before I bought anything. I gotta go by mack this weekend anyway, so I'm going to call and see if they have any 9/16 B7 all-thread
did a little more work on the 4runner this weekend
Front seat mounts
http://tamor.us/members-rigs/albums/...0343.sized.jpg
I'm going to cover the frame section in the middle above the t-cases with aluminum. The rear seat mounts had to be at floor level due to the height of the seat, so those mounts come up from the frame underneath. I didn't have time to get pics of that
http://tamor.us/members-rigs/albums/...0353.sized.jpg
http://tamor.us/members-rigs/albums/...0357.sized.jpg
I'm going to remove the doors, and continue the rear fender bars angling down to the front of the sliders. I'm also going to wrap the back end of the rear fender bars around to meet the rest of the tubing when I'm done with the upper portion of the exo
the front fenders
http://tamor.us/members-rigs/albums/...0349.sized.jpg
http://tamor.us/members-rigs/albums/...0350.sized.jpg
the front bumper isn't finished or painted because I don't know if I'm going to leave it like that. It just didn't turn out like I wanted it to, so if I have enough tubing, I may cut it off and start over with a different design
Do you plan on leaving the front of that tube like that? I would try to make a curved piece on the end that curves towards the body to keep from hanging up on it.Quote:
Originally Posted by CRaSHnBuRN
The top tube on the front bumper is too straight and sticks out.
Looks really sweet though :cool:
Maybe you should read the posts and not just look at the pretty pictures.:flipoff2: :laughing:Quote:
Originally Posted by TxCruzr
Mongo's looking good. :gigem:
yeah, try reading next time :flipoff2: I knew the rail sticking out in the back was going to be a problem. At first I was going to wrap it back into the cab, but then decided to ditch the doors and run the tube from the rail down kinda like a permanent tube door. It would also help keep things from getting hung up as the vehicle slid along rocks and stuff. As for the bumper, yeah it ended up to straight and funky looking, hence the reason I'm plannin on ditching it. Other than the fender bars, its only bolted on, so it shouldn't be to hard to remove it. I'm going to cut the fender bars close to the bumper, then sleeve them and go with the new design from thereQuote:
Originally Posted by TxCruzr
Quote:
Originally Posted by mudtoy67
i dont reed gud :flipoff2:
I like the front fender bars. I've always like mini's and 4runners with the front cut like that :cool:
holy crap do you have a spy in "John's shop?" Those exposed ends of tubing look strangely familiar
Quote:
Originally Posted by uglyota
loose lips sink ships, eric.
you haven't seen the pics I put in PBB Chit-chat :confused2
guess i missed them. oh well.