SAS: Towelie-Ban Truck

Printable View

Show 40 post(s) from this thread on one page

04-11-2007, 05:45 PM
TMatheaus

cook has those 31's

coop used to have a set of stock steel yota wheels

edit, i didn't read the other thread before i posted this
04-11-2007, 06:08 PM
sasquatch

those got sold
04-11-2007, 08:05 PM
JeepPhisherman

Davido hooked me up.
04-12-2007, 01:55 PM
JeepPhisherman

Quote:

Originally Posted by CRaSHnBuRN

you can get the longer D ring mounts from rockstomper.com

Not long enough, already been there. Everyone makes them for 2" material, I need them for 3" material. Going to have copperhead make them most likely.
04-12-2007, 02:16 PM
CRaSHnBuRN

let us know why kinda of deal he gives you. I could use a few as well
04-12-2007, 04:44 PM
JeepPhisherman

Quote:

Originally Posted by CRaSHnBuRN

let us know why kinda of deal he gives you. I could use a few as well

I talked to him about prices on cutting some frame plates for me, and they were pretty high so who knows what the price on these things will be. I don't even know if he can do it since I'm looking for 3/4-1" thick.
04-12-2007, 08:18 PM
JeepPhisherman

Quote:

Originally Posted by CRaSHnBuRN

let us know why kinda of deal he gives you. I could use a few as well

$30 for two made of 1/2". Biggest they can go is 5/8".
What's the price like on 3"x1/2" flat bar? I might just go at it with a grinder and a drill press.
04-12-2007, 09:18 PM
AggieTJ2007

why not go 1 inch if you are going to make them
04-12-2007, 10:03 PM
JeepPhisherman

Quote:

Originally Posted by AggieTJ2007

why not go 1 inch if you are going to make them

It would take twice the time and twice the grinding disks/stones.

If I had a mill they'd be done already.
04-12-2007, 11:05 PM
CRaSHnBuRN

screw that, I'll make my own
04-13-2007, 12:46 AM
agjohn02

i made mine
04-13-2007, 01:25 AM
CRaSHnBuRN

yeah its not a big deal to make them, but copperhead seems to be so cheap I figured maybe it would be easier buying them, but not for that price
04-13-2007, 10:44 AM
sasquatch

why don't you cut it out with a torch. i did mine in a hurry and they don't look bad.
04-13-2007, 10:46 AM
JeepPhisherman

Quote:

Originally Posted by RCook527

why don't you cut it out with a torch. i did mine in a hurry and they don't look bad.

Probably because I don't have a torch.

edit: But if you've got one and are willing to help out for a couple beers, problem solved! I'm going to pick up some 3/4"x3" flat at Mack this afternoon.
04-13-2007, 10:48 AM
sasquatch

i don't either
04-14-2007, 02:04 AM
DRAGOONRANCH

Quote:

Originally Posted by JeepPhisherman

Probably because I don't have a torch.

edit: But if you've got one and are willing to help out for a couple beers, problem solved! I'm going to pick up some 3/4"x3" flat at Mack this afternoon.

I will get up w/ ya when I get home if you want.
04-14-2007, 07:04 AM
JeepPhisherman

Quote:

Originally Posted by DRAGOONRANCH

I will get up w/ ya when I get home if you want.

I'd appreciate that ed, I really need the use of a drill press though, or a mill.

Picked up 2 5.5" pieces of 3-1/4"x1" flat stock for $2 from mack
:gigem:
04-14-2007, 08:15 AM
DRAGOONRANCH

This might be a good reason to get granddad's drill press up and runnin again.
09-09-2007, 03:52 PM
JeepPhisherman

Sold the truck on Saturday to a buddy on another forum.

Picked this up today...

http://farm2.static.flickr.com/1316/...9bfc96b0fb.jpg
09-09-2007, 06:41 PM
william_ace

you sold the toyota? what you gonna get for a rig?
09-09-2007, 09:29 PM
JeepPhisherman

I'll buy something when I have time for wheeling again. Most likely in a few years, hopefully sooner. I'm always on the lookout for a good deal.
09-09-2007, 09:58 PM
AggieTJ2007

what the hell is that it is ugly as piss
09-09-2007, 10:14 PM
jerryg79

Quote:

Originally Posted by AggieTJ2007

what the hell is that it is ugly as piss

looks like a honda accord to me.
09-09-2007, 10:50 PM
AggieTJ2007

have fun with that, I perfer a vehicle that will at least run over curbs
09-10-2007, 08:11 AM
JeepPhisherman

It was nice to be able to run 90 the whole way back from CS and feel like I was going 40 in my truck.
09-10-2007, 09:52 AM
FJAggie07

What happened to the dream of a Tundra Garrett?

to each his own, good luck my friend. Good quality car, hope you don't miss your truck too much.

EDIT: I be no good at punctuation.
09-10-2007, 10:30 AM
CRaSHnBuRN

Quote:

Originally Posted by AggieTJ2007

have fun with that, I perfer a vehicle that will at least run over curbs

no ****, if I was driving a car down here I would have destroyed it by now.
09-10-2007, 06:03 PM
JeepPhisherman

Quote:

Originally Posted by CRaSHnBuRN

no ****, if I was driving a car down here I would have destroyed it by now.

Unlike most Texans, I possess driving skill.
09-10-2007, 06:05 PM
jerryg79

Quote:

Originally Posted by JeepPhisherman

Unlike most Texans, I possess driving skill.

having driven along the entire the entire eastern sea board, including the ****ty state from which you hale, i would say that ****ty drivers exist everywhere.
09-10-2007, 06:06 PM
CRaSHnBuRN

Quote:

Originally Posted by JeepPhisherman

Unlike most Texans, I possess driving skill.

bring that driving skill down here to south Houston. The potholes here would swallow that car. You know they're big when even the dump trucks are swerving all over the road trying to avoid them
09-10-2007, 06:18 PM
Sharpe

Quote:

Originally Posted by JeepPhisherman

Unlike most Texans, I possess driving skill.

Like most NATIVE Texans, I dont. Therefor I drive the biggest ****ing pile of **** possible in hopes of annhilating a small imported (preferably Toyota) car driven by a yankee and at the same time somehow totaling said pile of **** for its insurance money since its "blue book value" is 1.5 times what it would actually sell for.
09-10-2007, 06:34 PM
JeepPhisherman

Quote:

Originally Posted by Snatch Adams

having driven along the entire the entire eastern sea board, including the ****ty state from which you hale, i would say that ****ty drivers exist everywhere.

I don't disagree. What was the point of your post again?
09-10-2007, 06:36 PM
agjohn02

he was just reminding everyone that you are not a real Texan, nor will you ever be. therefore your rightful place is on the sole of doug k's shoe.
09-10-2007, 06:37 PM
jerryg79

Quote:

Originally Posted by agjohn02

he was just reminding everyone that you are not a real Texan, nor will you ever be. therefore your rightful place is on the sole of doug's shoe.

actually i was just baiting him with an openly ******* post, much like he was doing.
09-10-2007, 06:40 PM
Reckless

He thinks he can drive because he watches NASACR, on the other hand I watch Demolition Derbys and CORR racing.
09-10-2007, 06:40 PM
JeepPhisherman

Quote:

Originally Posted by CRaSHnBuRN

bring that driving skill down here to south Houston. The potholes here would swallow that car. You know they're big when even the dump trucks are swerving all over the road trying to avoid them

I didn't move to Houston for several reasons, overall ****tiness of the city was one of them.
09-10-2007, 06:42 PM
JeepPhisherman

Quote:

Originally Posted by agjohn02

he was just reminding everyone that you are not a real Texan, nor will you ever be. therefore your rightful place is on the sole of doug k's shoe.

Am I acting like that chode that showed up to the tailgate? If so, I appologize, I've been huffing paint all afternoon trying to correct mistakes that my 3rd gen. super is too lazy to fix.

And I have no desire to be a Texan, it's a nice state, but no reason to spend your whole life here.
09-10-2007, 08:25 PM
HULK-1

The state of Texas ****ing rules!
09-10-2007, 08:27 PM
FJAggie07

Quote:

Originally Posted by HULK-1

The state of Texas ****ing rules!

x2

Definitely couldn't have said that better....
09-10-2007, 10:41 PM
agjohn02

did i get moderated in here? what for? it wasnt anything off color. was it?

Show 40 post(s) from this thread on one page

All times are GMT -5. The time now is 07:12 PM.