:DQuote:
Originally Posted by JBrown89
Current plan for my dad and I will be to head out of Conroe/Houston mid-day Friday. Ridin' in style haulin' ass with the old man's DMax... :gigem:
Printable View
:DQuote:
Originally Posted by JBrown89
Current plan for my dad and I will be to head out of Conroe/Houston mid-day Friday. Ridin' in style haulin' ass with the old man's DMax... :gigem:
Ill be starting when we get there,
no at student drivers goin through dallas on the way to clayton, right cookQuote:
Originally Posted by Reckless
I've done the drive through austin at 5:00, it's not too bad except for beecave which backs up for some miles. I'm gonna see if I can find a way around that.
leave earlier :gigem:Quote:
Originally Posted by eight
Quote:
Originally Posted by eight
you think 10 or 290?
i think if we take 10 and leave at 1 like we are planing it wont be so bad....we can probably cruise once we get outside katy and then hit 71 the rest of the way to the other side of austin?
ya thats what i was thinking... just wanted to see if anyone knew of any problems with that route
71 to ben white through austin
I'll be going 290 to Elgin and taking a north on 95 through Taylor to Circleville then west on 29 through Georgetown, Burnet, Llano, and Mason. But I work at 290 and 8 so I'm allready up there. It would take me at least a half hour to get to 10.
Coming from way up north (I think CJ lives above 290) I don't think it would be worth it to drive down to 10 just so you can take 71 through austin. Sure it's nice roads, but my way would be no traffic, just a little in georgetown maybe. At 5 I'll have some traffic getting onto 290 and then going out of town for a few miles and it'll clear up.
Me and Creighton did that on the way to clayton in 05, i was blowin the chick kisses and he swerved.Quote:
Originally Posted by TMatheaus
Are you sure she didn't swerve?Quote:
Originally Posted by Reckless
Should we get a head count for the 2pm mall leave time?
F150 is back from Varsity with a new exhaust manifold and rear axle seals under warranty. Bronco is not done, tieing it into the frame tomorrow and it should be ready to go. I do not think he will get the seat bars and my new seats in, but its will be on the trailer Thursday night.
i think we'll have a kampground kruiser this year
the sex seat is back in action!!!!!!
i got a new cap and rotor for the old 302, its not red though, its Ford blue :flipoff2:
its awwn *****!!!!Quote:
Originally Posted by JBrown89
i got a msd blaster 3 coil
Im leavin CS right before 3 (have 2 wait till the gf gets out of class) on friday pullin the big enclosed trailer with my zuk and tools. Ill probobly end up catchin up with the 2:30 group along the way. Who is leading that? could you please get me a phone # so I can keep tabs on traffic etc. Ive never been there so I might have a couple of questions too. Also I still have 1 seat available for a ride there. 2 if I really need to use the middle seat. --Aaron
Does anyone have just a plain propane frier? Mainly just need one with stew pot to burn some frijoles sat night. Robbie mentioned bringing his.
prolly leaving c/s tomorrow around 11 or so, wont be towing anything
I am bout to fire up the pete and head to college station to pick up a few rigs.
I will holler at you guys on da phone here in a minute if you get this pretty quick.
I have a burner, no tank or pot though.Quote:
Originally Posted by texasxj
puff, puff, give, mutha****er...Quote:
Originally Posted by afroman006
cj and i will be bringing one... we were planning on doing crawfish friday night :flipoff2:
we have one here dummyQuote:
Originally Posted by texasxj
elise and i will be headed that way tomorrow night expected arrival around 10ish in the pm
could someone please bring me a large round sticker also... i need one...
Quote:
Originally Posted by DRAGOONRANCH
Damn stingy motha****a thats puff puff pass by nice wit it.
In my best ebonics (is ebonics what is PC?) accent
which way are yall taking up there? i keep seeing Austin over and over and it would be flat out stupid to go through Austin from CS. If any of yall need some help on any last minute stuff, give me a call. I should be done with my test at 6 and able to lend a hand afterwards.
Tyler
21 to 71 through austin on ben white during the day it not that bad
then where? thats only half way. why not just cut north in caldwell from 21 to 79 then take the taylor loop, aka 95, to 29?Quote:
Originally Posted by texasxj
Quote:
Originally Posted by Eckert
if you're smart. thats what you will do.
From college station, you take either 21 to caldwel up to milano, or 6 to hearn to milano. Then take 79 to taylor where you will take the business route, then go north on 95 to circleville, and west on 29 through georgetown (big HEB to buy supplies at), burnet, llano, to mason. Then north on whatever that highway's number is that goes to camp air, right at camp air, and right at the big curve.
I just loaded up half drunk after the CCA banquet, maybe I got everything.
I figure I'll be one of the last in, so if you're broke down past taylor give me a call. 979,571,1460.
i built the Tcc trophy today with help from, clarke, cook, and my girl friend making the stencil. Here is what you have to look forward to if you win.
*cough cough* and sharpe's welder/house/etc. *cough cough*
are those 9 inch parts from one of cooks many different ones?Quote:
Originally Posted by stx4wheeler
and sharpes welder, it is a nine inch ring, and a broken amc 20 shaft we cut in half.
Quote:
Originally Posted by stx4wheeler
That looks sweet frick.
And I forgot 4wheel parts closes early, so I've got to sit around until they open before I can get out of town...
thanks for waiting around garrett