Pigpen

Got the TAC module replaced and

IT RUNS

Earth shatteringly loud at that. 496 cubid inches sure makes alot of noise :gigem:

Got it dropped off at Rusty's and I drove it straight off the trailer onto his lift. He said getting it done by tommorow would be no problem! Still lots left to do :laughing:

Driving it around the yard was an interesting experience in itself. Obscenely overpowered. The electronic pedal is prety sensative and it sits way too high, if I have time (unlikely) I might redo it. Not a high priority.

Quote:

---

Originally Posted by afroman006

overpowered

---

Take that back!

congrats :cheers:
don't break it too quickly

Hell yeah! Congrats man!

One year, someone needs to be working on their vehicle while it's on the trailer.

Quote:

---

Originally Posted by afroman006

I would just run a short fat filter like Lynda's jeep but on the 8.1 the throttle body is angled up and my radiator is much closer to the front of my motor, so there's no room for something like that. Plus I need to stick a MAF sensor in there somewhere.

Its getting there!

---

The MAF is in there and they have much smaller ones.
http://www.hotrodlane.cc/08%20catalo...talogMAIN.html
page 85

I have some 8 degree aluminum shims I can bring down tomorrow evening if you need them.

What muffler did you end up with for this?

sweet, bout fawking time

Gooood....Gooood....

http://i19.photobucket.com/albums/b1...Good20Good.gif

Quote:

---

Originally Posted by redcagepatrol

The MAF is in there and they have much smaller ones.
http://www.hotrodlane.cc/08%20catalo...talogMAIN.html
page 85

---

Those are neat, didnt realize the MAF was there. I have a 90 degree silicone elbow in hand that fits very nicely in the available space so that ***** plus a 90 degree exhaust elbow will still allow me to put the filter where I originally wanted.

Quote:

---

Originally Posted by Fredo

What muffler did you end up with for this?

---

The magnaflow yall used on the suburban. You held it and screamed into it to prove to me how well it works one night at my house before going so unconcious Flem couldnt wake you up and ended up leaving you there for the night. :laughing:

Quote:

---

Originally Posted by DRAGOONRANCH

I have some 8 degree aluminum shims I can bring down tomorrow evening if you need them.

---

Already have shims in the front, there might be some cut and turning action after Clayton...

Quote:

---

Originally Posted by afroman006

The magnaflow yall used on the suburban. You held it and screamed into it to prove to me how well it works one night at my house before going so unconcious Flem couldnt wake you up and ended up leaving you there for the night. :laughing:

---

Ah yes, that's all coming back to me now.

Quote:

---

Originally Posted by afroman006

Those are neat, didnt realize the MAF was there. I have a 90 degree silicone elbow in hand that fits very nicely in the available space so that ***** plus a 90 degree exhaust elbow will still allow me to put the filter where I originally wanted.

---

Something like this?

Yup more or less.

http://s406.photobucket.com/albums/p...t=100_2422.flv

http://s406.photobucket.com/albums/p...t=100_2423.flv