Sloth

A month ago you had little more than grinding experince and you're complaining about 5 hours of plasma work? go find another shop then :flipoff2::flipoff2:

or pitch in for a plasma table:gigem:

I'm pretty sure you can get a basic 4x8 torchmate for around $3500 minus the plasma and build your own table (torchmate gives you the specs)

http://i736.photobucket.com/albums/x...V/IMAG0265.jpg

http://i736.photobucket.com/albums/x...V/IMAG0266.jpg

http://i736.photobucket.com/albums/x...V/IMAG0267.jpg

http://i736.photobucket.com/albums/x...V/IMAG0268.jpg

http://i736.photobucket.com/albums/x...V/IMAG0269.jpg

.....and 42's Eat your heart out Sharpe.

http://i736.photobucket.com/albums/x...V/IMAG0270.jpg

Ill be down there tonight to weld those up for you :gigem:

Hope you've gotten better at replacing shafts...

I have 35 spine outer. So ill break less than you. And I have 3:73 gears....I won't be doing much for a while.

Build a doubler with a 1356.

Quote:

---

Originally Posted by Sparling

Build a doubler with a 1356.

---

X2. That would be the cheapest way to get good gearing.

Link for a good 1356 double write up?

Just ordered some 17x9 crager soft 8 wheels.

Summit's customer service is ****ing awesome. I called and they fixed my problem within 1 minute.

http://www.summitracing.com/parts/CRR-3978981/


I plan on doing these after I recoup from the wheels.

http://www.pirate4x4.com/forum/showt...924867&page=25

I pm'ed him and he said he'll take 10% off if we do a group buy of 5 or more. They're $200 for 15" and $215 for bigger. Powdercoating is $20 for the set and anti-coning hardware for $40.

Is that price for a set of 4? I am in if that is the case

I am 90% sure that it's for the set. I pmed him just in case. His thread doesn't really say it from what I can see but I'm pretty sure that's the case.


I decided the big tamor logo wouldn't fit on the wheels right and would be too complicated. So I took the clayton shirt design from a few years ago. I like it better anyway.

http://i736.photobucket.com/albums/x...laytonlogo.png

How are you going to do the logo? Please tell me you're going to freehand it. The regular aTm logo like on me and Ed's rockrings is about as intricate as a plasma table can get. So you borrowed those tires? Or is it just one...

I borrowed the tires from Chet. If you read my post you would see the link to a vendor on pirate who has a plasma table. The rock rings are $200 and he'll do any design you want for no extra cost.

That is extra bad ass, and his price cant be beat

yes Tate. $200 for the kit + $20 powdercoating. I'm gonna get mine maroon.