Sloth

That bolt is 2 threads on for mock up....stop is held on by the heim.

Od of the rod end is smaller than of of the RAM.

Quote:

---

Originally Posted by TdmayfieldIV

here's how psc says to mount it.

http://www.pscmotorsports.com/media/...sist_kit_1.jpg

---

100% bolt on. gay.

even though you have a janky stop, i'd still be weary of turning the wheel too far. i.e. pay attention to when it binds.

I bet Coleman is referring to the threads being in shear.

Quote:

---

Originally Posted by bcolman

any idea of how you are going to secure the stop?

also the mount doesnt look that bad, but you may need one of those ram skid plates like jb has/had

---

I had my ram mounted as low as Tommy does and even with the little skid coming off the t-rod, it only lasted 2 runs. THen I went high-steer. Tommy wheels like a bitch though, so it should be fine.:)

Quote:

---

Originally Posted by BroncoJo

I bet Coleman is referring to the threads being in shear.

---

this, also when you get a new bolt drop the bolt in from the top as some insurance incase you loose the nut

Quote:

---

Originally Posted by sasquatch

100% bolt on. gay.

even though you have a janky stop, i'd still be weary of turning the wheel too far. i.e. pay attention to when it binds.

---

lets see your **** look as clean as that.

Went to vilas' and they're making me one.

With the track bar bracket where it is i can't put a bolt in from the top.

Went to vilas' and they're making me a new steering stop.

With the track bar bracket where it is i can't put a bolt in from the top.

Quote:

---

Originally Posted by Hellbent

lets see your **** look as clean as that.

---

It's a brand new truck, if it didn't look clean he should be subjected to driving a hybrid. Anybody can bolt **** on, actually building something takes skill and effort. That's why (except for the one with ttb) jeeps are gay.

Who cares if it's bolt on if it works.

yeah, lots of bolt ons indicates that you started with a decent platform

it's bolt on so chodes that think they need hydroassist on the street for their big gay douche trucks can just slap it on in the parking lot of the frat house. $5 of plate can accomplish what that $200 bracket does, unless you're an inept fabricator. if you want to flush the $ for a bolt on ram mount that's going to get smashed on the rocks, be my guest.

it looks like a 60, the same platform as every other truck out there...

So your problem is not that it's bolt on...it's that chode frat boys might use it to accessorize their big gay trucks.

http://i736.photobucket.com/albums/x...IMAG0153-1.jpg