Sparling and I finished wiring it tonight. New Tail lights and marker lights.
http://i736.photobucket.com/albums/x...V/IMAG0428.jpg
http://i736.photobucket.com/albums/x...V/IMAG0427.jpg
Printable View
Sparling and I finished wiring it tonight. New Tail lights and marker lights.
http://i736.photobucket.com/albums/x...V/IMAG0428.jpg
http://i736.photobucket.com/albums/x...V/IMAG0427.jpg
You should skip nap time tomorrow so we can finish this bitch.
I need my naps, i'm a growing boy
Looking good. Did you include provisions in the wiring for marker lights at the outer corners of the fenders? Mine has them and it sure helps me see where the edge of the trailer is, especially on dark, narrow roads.
They are required. Try the new 3/4" microlite single LEDS
only required if it's over 88" wide i think
FWIW - gooseneck trailer has proven to be a good source of trailer parts for good prices. They also have nice 6 dollar hats.
gooseneck on 21 is the ****.
Yeah that's where I bought the parts. They are pretty badass.
The deck is 81" wide. the fenders are 10.75" wide each....so I need the triple lights in the rear and fender lights.
That's 102.5"! You will also need a wide load sign, check your math.
Had to cut the fenders out so it's not over 102" It's exactly 101.5" wide now.
http://i736.photobucket.com/albums/x...V/IMAG0436.jpg
4.25" of tire clearance
http://i736.photobucket.com/albums/x...V/IMAG0438.jpg
http://i736.photobucket.com/albums/x...V/IMAG0445.jpg
http://i736.photobucket.com/albums/x...V/IMAG0446.jpg
I'm not happy with the way it looks now, and it needs clearance lights on the fender. I'm going to use some 2x4 square tubing we have and mount it under the fender. So the bottom 4" of the fender will be some thick **** so it won't get ****ed up if I run it into something.
Using 2x2 square tubing to make them drive over.
Looking good.
The owners wife is making me take off the fourth to spend time with the family, so I think I am going to bring our ratty tilt bed GN home and fab some drive over fenders that day to make up the time while I am tending to the pit. ***
TumTum, in addition to the beefy square tube, make a wedge brace like so. Will help deflect polls and **** that you will inevitably drag it into.