d-30 stuff, airline, misc.

Printable View

10-31-2009, 11:01 AM
85cj7

4 Attachment(s)

d-30 stuff, airline, misc.

I'm coming to Dallas again on the 20th and can bring items then.

Dana 30 3.73 ring and pinion (Used) -$30

cj7 drivers side side view mirror, faded-$5

Left and Right d-44 knuckles (non-flat top) with balljoints and spindle studs-$35

ARB bulkhead fittings kit-$5

Assorted Emblems, Speak Up if you see one you want
10-31-2009, 11:07 AM
85cj7

4 Attachment(s)

more
10-31-2009, 11:08 AM
85cj7

2 Attachment(s)

more 2
10-31-2009, 11:40 AM
colman

isn't that 4.88 a thick set?
10-31-2009, 12:26 PM
85cj7

Quote:

Originally Posted by colman

isn't that 4.88 a thick set?

No, 99% sure its regular. I didn't request a thick gear set when I bought it.
10-31-2009, 12:39 PM
colman

, just curious. i think the d30 carrier break is 3.54 so it should be regular but i'm not sure
10-31-2009, 02:15 PM
mudtoy67

I'll take the setup bearings.
10-31-2009, 02:34 PM
85cj7

Quote:

Originally Posted by mudtoy67

I'll take the setup bearings.

I forgot to put that its all of them minus one carrier bearing and race. Still interested? So its both pinion bearings and one carrier.
10-31-2009, 02:43 PM
mudtoy67

Hmmm....the carrier bearings is really what I need. I guess I'll pass.
11-01-2009, 02:42 PM
bcolman

ill take the fan, can you bring it to the meeting?
11-01-2009, 02:46 PM
85cj7

Quote:

Originally Posted by bcolman

ill take the fan, can you bring it to the meeting?

ya sure. It's yours.
11-02-2009, 10:07 PM
AggieTJ2007

I think I have a carrier bearing or two but I don't have any pinoin bearings

BDR I also have some dana 30 4.56s
11-03-2009, 05:13 PM
85cj7

bump
11-03-2009, 08:24 PM
breckboarder55

Is there anything wrong with the arb stuff?
11-03-2009, 08:40 PM
85cj7

no, the arb stuff is perfect. It is the same arb for 71 and up dana 30s so it will work in your tj too.

Let me know if you want it quick, I've got someone intersted in a package deal. arb, solinoids, switches, wiring, 7' airline. But I would rather sell to you so I don't have to ship. I'll sell it all to you for $425 firm.

the switches, solinoids, and arb are an older model, (originally from coop's jeep) so you would have to tell arb that if you ever needed spare parts. You would probably need a new shim kit for the arb as the shims I have may not be enough for your install.
11-03-2009, 11:02 PM
85cj7

Quote:

Originally Posted by bcolman

ill take the fan, can you bring it to the meeting?

brian, I went a got it out of storage, its a 14" not 16", still interested?
11-04-2009, 12:03 AM
bcolman

i think thats a little small for for the blazer, even though it was going to be a spare
11-04-2009, 12:09 AM
85cj7

I'l bring it and you can take a look.
11-04-2009, 12:28 AM
bcolman

ok
11-12-2009, 07:59 PM
85cj7

Quote:

Originally Posted by 85cj7

Built Tie Rod and Drag link for widetrack d-30 from CJ7, 1.25" DOM tubing with one year old tie-rod ends and jam nuts. Will also give you some spare tie rod ends I have. Painted black-$125

(2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$35

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$5 each

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj. -$15

Dana 30 4.88 ring and pinion (Brand New)-$75

Dana 30 3.73 ring and pinion (Used) -$35

Dana 30 yoke-$10

Dana 30 u-bolts and custom 1/2" plates-$5

14" electric fan, brand unknown, works fine-$10

(2) cj stock proportioning valves-$5

cj7 drivers side side view mirror, faded-$5

braided stainless brake line, 24" long with banjo fitting at one end and standard 3/16" female on the other-$5

Left and Right d-44 knuckles (non-flat top) with balljoints and spindle studs-$40

d-44 driveslugs-$40

ARB bulkhead fittings kit-$10

Reamer for cj7 tapered tie rod/drag link ends 7/16"-1" (only used once)-$25

Wagoneer Tie Rod, ends are unknown condition-$10

Stock CJ7 Pitman arm-$10

F-250 pitman arm, looks like a 1" drop, stock-$10

Stock d-30 cover-$10

CJ-7 spindle nut socket-$10

Assorted Emblems, Speak Up if you see one you want

New Stuff
01-17-2010, 08:54 PM
85cj7

(2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$35

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$5 each

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj. -$15

Dana 30 3.73 ring and pinion (Used) -$35

14" electric fan, brand unknown, works fine-$10

cj7 drivers side side view mirror, faded-$5

Chevy Left and Right d-44 knuckles (non-flat top) with balljoints and spindle studs-$40

d-44 driveslugs-$40

ARB bulkhead fittings kit-$10

Reamer for cj7 tapered tie rod/drag link ends 7/16"-1" (only used once)-$25

Stock CJ7 Pitman arm-$10

F-250 pitman arm, looks like a 1" drop, stock-$10

Stock d-30 cover-$10

Assorted Emblems, Speak Up if you see one you want
01-17-2010, 09:59 PM
Seth

Interested in the drive slugs. Do they fit all 44s? Specifically, 78-79 hp44?
01-17-2010, 10:04 PM
85cj7

mmmmm. Don't know. Maybe someone else could help out. Came off of chevy outers from Brian's Blazer's stock front I now have in the Jeep. 19 spline shafts if I remember right. Can get you measurements and spline counts if needed.
01-17-2010, 10:48 PM
colman

they are from a waggy, the housing is from brian, 8 lug from something i parted out and dslugs are waggy. they should work in any d44 that is 19 spline and internal style hubs